Date: Fri, 24 Apr 2009 20:39:40 +0200 From: Martin Schmidt <martisch@uos.de> To: freebsd-stable@freebsd.org Subject: RE: 7.1-STABLE Sun Mar 29 01:06:46 ADT 2009 Locks up ... Message-ID: <A98FF8D3-1486-43D4-8EE6-50F8C3DACCA1@uos.de>
next in thread | raw e-mail | index | archive | help
--Apple-Mail-17-298180184
Content-Type: text/plain;
charset=US-ASCII;
format=flowed;
delsp=yes
Content-Transfer-Encoding: 7bit
Hi Marc and List,
i had similar issues with FreeBSD 7.2-PRERELEASE. Server (zfs,nfs)
seems to hang in intervals of about 8 hours.
kernel is still there but no connections can be made to nfs/ssh and
login on local console doesn't seem to
work due to incredible slowness. breaking to the debugger takes a
moment but works.
(compiling kernel with WITNESS didnt help)
the server had been solid before with 7 stable kernel from around 19
October 2008.
I now added these lines to /boot/loader.conf
hw.pci.enable_msi=0
hw.pci.enable_msix=0
to disable Message Signaled Interrupts. Which are used by the 3ware
twa driver and igb network driver on our server.
With this the server had run 3 days with no hangs. I then enabled msi
again and had a hang within 24 hours. Disabled again and now the
server is online without an issue for 6 days.
Im not 100% sure yet if this really is the sole source of the problems
(e.g. workload might be another factor). But i guess its worth a try
to check if it might help you too.
If this is a known problem or there are any other hints to solve this
problem or if the server configuration just seems wrong, i appreciate
the feedback.
regards,
Martin
pciconf (with msi):
hostb0@pci0:0:0:0: class=0x060000 card=0xa28015d9 chip=0x40038086
rev=0x20 hdr=0x00
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[58] = MSI supports 2 messages
cap 10[6c] = PCI-Express 2 root port
pcib1@pci0:0:1:0: class=0x060400 card=0xa28015d9 chip=0x40218086
rev=0x20 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[58] = MSI supports 2 messages
cap 10[6c] = PCI-Express 2 root port
cap 0d[b0] = PCI Bridge card=0xa28015d9
pcib2@pci0:0:3:0: class=0x060400 card=0xa28015d9 chip=0x40238086
rev=0x20 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[58] = MSI supports 2 messages
cap 10[6c] = PCI-Express 2 root port
cap 0d[b0] = PCI Bridge card=0xa28015d9
pcib3@pci0:0:5:0: class=0x060400 card=0xa28015d9 chip=0x40258086
rev=0x20 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[58] = MSI supports 2 messages
cap 10[6c] = PCI-Express 2 root port
cap 0d[b0] = PCI Bridge card=0xa28015d9
pcib4@pci0:0:7:0: class=0x060400 card=0xa28015d9 chip=0x40278086
rev=0x20 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[58] = MSI supports 2 messages
cap 10[6c] = PCI-Express 2 root port
cap 0d[b0] = PCI Bridge card=0xa28015d9
pcib8@pci0:0:9:0: class=0x060400 card=0xa28015d9 chip=0x40298086
rev=0x20 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[58] = MSI supports 2 messages
cap 10[6c] = PCI-Express 2 root port
cap 0d[b0] = PCI Bridge card=0xa28015d9
none0@pci0:0:15:0: class=0x088000 card=0xa28015d9 chip=0x402f8086
rev=0x20 hdr=0x00
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 11[58] = MSI-X supports 4 messages in map 0x10
cap 10[6c] = PCI-Express 2 type 0
hostb1@pci0:0:16:0: class=0x060000 card=0xa28015d9 chip=0x40308086
rev=0x20 hdr=0x00
hostb2@pci0:0:16:1: class=0x060000 card=0xa28015d9 chip=0x40308086
rev=0x20 hdr=0x00
hostb3@pci0:0:16:2: class=0x060000 card=0xa28015d9 chip=0x40308086
rev=0x20 hdr=0x00
hostb4@pci0:0:16:3: class=0x060000 card=0xa28015d9 chip=0x40308086
rev=0x20 hdr=0x00
hostb5@pci0:0:16:4: class=0x060000 card=0xa28015d9 chip=0x40308086
rev=0x20 hdr=0x00
hostb6@pci0:0:17:0: class=0x060000 card=0xa28015d9 chip=0x40318086
rev=0x20 hdr=0x00
hostb7@pci0:0:21:0: class=0x060000 card=0xa28015d9 chip=0x40358086
rev=0x20 hdr=0x00
hostb8@pci0:0:21:1: class=0x060000 card=0xa28015d9 chip=0x40358086
rev=0x20 hdr=0x00
hostb9@pci0:0:22:0: class=0x060000 card=0xa28015d9 chip=0x40368086
rev=0x20 hdr=0x00
hostb10@pci0:0:22:1: class=0x060000 card=0xa28015d9 chip=0x40368086
rev=0x20 hdr=0x00
pcib9@pci0:0:28:0: class=0x060400 card=0xa28015d9 chip=0x26908086
rev=0x09 hdr=0x01
cap 10[40] = PCI-Express 1 root port
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0xa28015d9
cap 01[a0] = powerspec 2 supports D0 D3 current D0
uhci0@pci0:0:29:0: class=0x0c0300 card=0xa28015d9 chip=0x26888086
rev=0x09 hdr=0x00
uhci1@pci0:0:29:1: class=0x0c0300 card=0xa28015d9 chip=0x26898086
rev=0x09 hdr=0x00
uhci2@pci0:0:29:2: class=0x0c0300 card=0xa28015d9 chip=0x268a8086
rev=0x09 hdr=0x00
ehci0@pci0:0:29:7: class=0x0c0320 card=0xa28015d9 chip=0x268c8086
rev=0x09 hdr=0x00
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib10@pci0:0:30:0: class=0x060401 card=0xa28015d9 chip=0x244e8086
rev=0xd9 hdr=0x01
cap 0d[50] = PCI Bridge card=0xa28015d9
isab0@pci0:0:31:0: class=0x060100 card=0xa28015d9 chip=0x26708086
rev=0x09 hdr=0x00
atapci0@pci0:0:31:1: class=0x01018a card=0xa28015d9 chip=0x269e8086
rev=0x09 hdr=0x00
atapci1@pci0:0:31:2: class=0x010601 card=0xa28015d9 chip=0x26818086
rev=0x09 hdr=0x00
cap 01[70] = powerspec 2 supports D0 D3 current D0
cap 12[a8] = unknown
none1@pci0:0:31:3: class=0x0c0500 card=0xa28015d9 chip=0x269b8086
rev=0x09 hdr=0x00
twa0@pci0:1:0:0: class=0x010400 card=0x100413c1 chip=0x100413c1
rev=0x01 hdr=0x00
cap 01[40] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 32 messages, 64 bit
cap 10[70] = PCI-Express 1 legacy endpoint
pcib5@pci0:4:0:0: class=0x060400 card=0xa28015d9 chip=0x35008086
rev=0x01 hdr=0x01
cap 10[44] = PCI-Express 1 upstream port
cap 01[70] = powerspec 2 supports D0 D3 current D0
cap 0d[80] = PCI Bridge card=0xa28015d9
pcib7@pci0:4:0:3: class=0x060400 card=0xa28015d9 chip=0x350c8086
rev=0x01 hdr=0x01
cap 10[44] = PCI-Express 1 PCI bridge
cap 01[6c] = powerspec 2 supports D0 D3 current D0
cap 0d[80] = PCI Bridge card=0xa28015d9
cap 07[d8] = PCI-X bridge supports
pcib6@pci0:5:0:0: class=0x060400 card=0xa28015d9 chip=0x35108086
rev=0x01 hdr=0x01
cap 10[44] = PCI-Express 1 downstream port
cap 05[60] = MSI supports 1 message, 64 bit
cap 01[70] = powerspec 2 supports D0 D3 current D0
cap 0d[80] = PCI Bridge card=0xa28015d9
twa1@pci0:6:0:0: class=0x010400 card=0x100413c1 chip=0x100413c1
rev=0x01 hdr=0x00
cap 01[40] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 32 messages, 64 bit
cap 10[70] = PCI-Express 1 legacy endpoint
igb0@pci0:8:0:0: class=0x020000 card=0x10a715d9 chip=0x10a78086
rev=0x02 hdr=0x00
cap 01[40] = powerspec 2 supports D0 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 11[60] = MSI-X supports 10 messages in map 0x1c enabled
cap 10[a0] = PCI-Express 2 endpoint
igb1@pci0:8:0:1: class=0x020000 card=0x10a715d9 chip=0x10a78086
rev=0x02 hdr=0x00
cap 01[40] = powerspec 2 supports D0 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 11[60] = MSI-X supports 10 messages in map 0x1c enabled
cap 10[a0] = PCI-Express 2 endpoint
vgapci0@pci0:10:1:0: class=0x030000 card=0xa28015d9 chip=0x515e1002
rev=0x02 hdr=0x00
cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
vmstat -i (with msi):
mstat -i
interrupt total rate
irq1: atkbd0 2 0
irq14: ata0 216 0
irq17: atapci1 172855 200
irq23: ehci0 12 0
irq48: twa0 1472 1
irq54: twa1 1895 2
cpu0: timer 1722548 1998
irq256: igb0 772 0
irq257: igb0 2673 3
irq258: igb0 485 0
irq259: igb0 2121 2
irq260: igb0 1319 1
irq261: igb0 2 0
cpu1: timer 1714417 1988
cpu2: timer 1713997 1988
cpu3: timer 1714220 1988
Total 7049006 8177
vmstat -i (without msi):
interrupt total rate
irq1: atkbd0 2 0
irq14: ata0 216 0
irq17: atapci1 210359 536
irq23: ehci0 11 0
irq48: twa0 1331 3
irq54: twa1 1751 4
irq56: igb0 3733 9
cpu0: timer 783575 1998
cpu1: timer 775435 1978
cpu2: timer 775251 1977
cpu3: timer 775364 1977
Total 3327028 8487
dmesg (without msi):
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-PRERELEASE #6: Mon Apr 13 13:30:07 CEST 2009
adm...@space.neurobiopsychologie.Uni-Osnabrueck.DE:/usr/obj/usr/
src/sys/SPACE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz (2327.51-MHz K8-
class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features
=
0xbfebfbff
<
FPU
,VME
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2
=
0xce3bd
<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 4280475648 (4082 MB)
avail memory = 4107509760 (3917 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD XSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 48 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
3ware device driver for 9000 series storage controllers, version:
3.70.05.001
twa0: <3ware 9000 series Storage Controller> port 0x2000-0x20ff mem
0xd8000000-0xd9ffffff,0xdc100000-0xdc100fff irq 48 at device 0.0 on
pci1
twa0: [ITHREAD]
twa0: INFO: (0x04: 0x0001): Controller reset occurred: resets=3
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-8LPML, 8
ports, Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015
pcib2: <ACPI PCI-PCI bridge> irq 50 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 54 at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 54 at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
twa1: <3ware 9000 series Storage Controller> port 0x3000-0x30ff mem
0xda000000-0xdbffffff,0xdc400000-0xdc400fff irq 54 at device 0.0 on
pci6
twa1: [ITHREAD]
twa1: INFO: (0x04: 0x0001): Controller reset occurred: resets=3
twa1: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-8LPML, 8
ports, Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015
pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci4
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 56 at device 9.0 on pci0
pci8: <ACPI PCI bus> on pcib8
igb0: <Intel(R) PRO/1000 Network Connection version - 1.4.1> port
0x4000-0x401f mem 0xdc020000-0xdc03ffff,0xdc000000-0xdc01ffff,
0xdc080000-0xdc083fff irq 56 at device 0.0 on pci8
igb0: [FILTER]
igb0: Ethernet address: 00:30:48:c2:35:76
igb1: <Intel(R) PRO/1000 Network Connection version - 1.4.1> port
0x4020-0x403f mem 0xdc060000-0xdc07ffff,0xdc040000-0xdc05ffff,
0xdc084000-0xdc087fff irq 70 at device 0.1 on pci8
igb1: [FILTER]
igb1: Ethernet address: 00:30:48:c2:35:77
pci0: <base peripheral> at device 15.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib9
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0x1800-0x181f irq 20 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0x1820-0x183f irq 21 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0x1840-0x185f irq 22 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xdc704000-0xdc7043ff
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
ums0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on
uhub3
ums0: 3 buttons and Z dir.
ukbd0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on
uhub3
kbd2 at ukbd0
pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib10
vgapci0: <VGA-compatible display> port 0x5000-0x50ff mem
0xd0000000-0xd7ffffff,0xdc200000-0xdc20ffff irq 18 at device 1.0 on
pci10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel AHCI controller> port 0x18b0-0x18b7,0x18a8-0x18ab,
0x18a0-0x18a7,0x1874-0x1877,0x1880-0x189f mem 0xdc704400-0xdc7047ff
irq 17 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
cpu0: <ACPI CPU> on acpi0
ACPI Error (psargs-0459): [\\_SB_.BCMD] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\
\_PR_.CPU0._OSC] (Node 0xffffff0001608c20), AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\
\_PR_.CPU0._PDC] (Node 0xffffff0001608c40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\\_SB_.BCMD] Namespace lookup failure,
AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\
\_PR_.CPU0._OSC] (Node 0xffffff0001608c20), AE_NOT_FOUND
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcd7ff,
0xcd800-0xcf7ff,0xcf800-0xcffff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <DVD-ROM UJDA780/1.50> at ata0-slave UDMA33
ad4: 238475MB <Seagate ST3250310NS SN06> at ata2-master SATA150
ad6: 238475MB <Seagate ST3250310NS SN06> at ata3-master SATA300
ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0
ipmi0: Number of channels 8
ipmi0: Attached watchdog
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da0: 100.000MB/s transfers
da0: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da1 at twa0 bus 0 target 1 lun 0
da1: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da1: 100.000MB/s transfers
da1: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da2 at twa0 bus 0 target 2 lun 0
da2: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da2: 100.000MB/s transfers
da2: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da3 at twa0 bus 0 target 3 lun 0
da3: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da3: 100.000MB/s transfers
da3: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da4 at twa0 bus 0 target 4 lun 0
da4: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da4: 100.000MB/s transfers
da4: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da5 at twa0 bus 0 target 5 lun 0
da5: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da5: 100.000MB/s transfers
da5: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da6 at twa0 bus 0 target 6 lun 0
da6: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da6: 100.000MB/s transfers
da6: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da7 at twa0 bus 0 target 7 lun 0
da7: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da7: 100.000MB/s transfers
da7: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da8 at twa1 bus 0 target 0 lun 0
da8: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da8: 100.000MB/s transfers
da8: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da9 at twa1 bus 0 target 1 lun 0
da9: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da9: 100.000MB/s transfers
da9: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da10 at twa1 bus 0 target 2 lun 0
da10: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da10: 100.000MB/s transfers
da10: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da11 at twa1 bus 0 target 3 lun 0
da11: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da11: 100.000MB/s transfers
da11: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da12 at twa1 bus 0 target 4 lun 0
da12: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da12: 100.000MB/s transfers
da12: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da13 at twa1 bus 0 target 5 lun 0
da13: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da13: 100.000MB/s transfers
da13: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da14 at twa1 bus 0 target 6 lun 0
da14: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da14: 100.000MB/s transfers
da14: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
da15 at twa1 bus 0 target 7 lun 0
da15: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
da15: 100.000MB/s transfers
da15: 715245MB (1464821760 512 byte sectors: 255H 63S/T 91180C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
On Apr 15, 5:15 am, free...@hub.org ("Marc G. Fournier") wrote:
> --==========FBEC849F7CF9A3F6439C==========
> Content-Type: text/plain; charset=us-ascii
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> Hi ...
> Over the past little while, two of my servers have suddenly
started to hang
> ... servers that up until this started, have been reasonably rock
solid ...
> they are generally within a day of each other for source code, and
the hardware
> on both are pretty much identical (HP Proliant DL360 Servers) ...
> I have serial console configured on both so that I can do CR ~ ^b
to get to
> DDB ... except, when it hangs, all I get is:
> "KDB: enter: Break sequence on console"
> And it hangs there, no prompt.
> I setup a simple script (see attached) to run every 5 minutes
that gathers
> various pieces of info that I think are pertinent, but most likely
don't cover
> everything ...
> Whenever this happens, on either machine, vmstat show data *like*
(notice the
> high procs -> w values?):
> procs memory page disks
faults cpu
> r b w avm fre flt re pi po fr sr da0 pa0 in
sy cs us sy
> id
> 165 106 2 12699168 33840 3080 38 2 2 3082 1623 0 0
337 36961 4731
> 18 7 75
> 64 75 4 12761744 23084 46809 623 65 43 19307 116 334 0 1189
83674 11708
> 70 20 10
> 1 68 25 12773980 23068 11036 3003 9 36 4055 116 282 0 1336
78346 14869
> 56 16 28
> 0 71 25 12774236 23084 186 769 1 5 18 80 249 0 609
9298 5894 5
> 5 91
> 5 90 31 12747296 23352 626 2546 5 104 1147 368 281 0 1536
40945 19980
> 6 5 90
> Where procs -> w just seems to keep rising ... note that the
output for
> vmstat *5 minutes before* shows:
> procs memory page disks
faults cpu
> r b w avm fre flt re pi po fr sr da0 pa0 in
sy cs us sy
> id
> 35 121 0 12414692 90552 3080 32 2 1 3090 1403 0 0 337
37022 4730
> 18 7 75
> 31 93 0 12314408 62024 36550 414 46 6 34285 27 563 0 916
94851 8813 67
> 33 0
> 43 179 0 12270932 23080 24035 101 41 12 13887 36 375 0 766
61969 6945
> 69 23 7
> 92 44 0 12265524 119804 2122 2028 1 32 13051 1096092 205 0
558 19460
> 4561 19 50 32
> 38 34 0 12330068 89140 30758 103 39 119 37037 2837365 165 0
773 92041
> 7111 47 53 0
> I have one QEMU VPS running on this box, with kqemu running the
latest kernel
> module ... but the other machine experiencing the same issue is
only running
> FreeBSD jails ...
> Both servers are running SCHED_4BSD, if that matters any ... ?
> I'm at a loss as to what to look at / for next ... pointers would
be greatly
> appreciated ...
> I have the various output files that the script generates
available if anyone
> thinks they would be useful ...
> thank you ...
> Marc G. Fournier Hub.Org Hosting Solutions S.A. (http://www.hub.org
)
> Email . scra...@hub.org MSN .
scra...@hub.org
> Yahoo . yscrappy Skype: hub.org ICQ . 7615664
--Apple-Mail-17-298180184--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A98FF8D3-1486-43D4-8EE6-50F8C3DACCA1>