Date: Sun, 8 May 2011 14:59:24 +0100 From: "Clayton Milos" <clay@milos.co.za> To: <freebsd-usb@freebsd.org> Subject: Relay controller Message-ID: <AA1C9B80ADCD490EB24DC989A81439A4@claydesktop> References: <BANLkTik9MDy_tS3s78xG9VtbTaW%2BnCoM9A@mail.gmail.com><201105050841.56095.hselasky@c2i.net><BANLkTi=8--eu8%2BxWt26eJP3P3DYQ0En%2BSg@mail.gmail.com><201105051009.55454.hselasky@c2i.net> <BANLkTin8CXZExgn6p20NNwoZ0fyiR%2BTXkA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi there I'm looking for any help out there. I have a USB relay controller that should be seen as a modem. I think there was something similar working before under FreeBSD called a PICKit. When I look up the error I'm getting it points to this kit. The vendor ID seems to be the same. The chip on the controller I have is a PIC18F24 J50. When I plug it in on a FreeBSD8.2 AMD64 release I get the following: root: Unknown USB device: vendor 0x04d8 product 0x000a bus uhub2 kernel: ugen2.2: <Microchip Technology Inc.> at usbus2 # usbconfig list ugen2.2: <CDC RS-232 Emulation Demo Microchip Technology Inc.> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON If I plug it into my Linux netbook running Ubuntu it works fine and comes up as such: [ 4607.992101] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 4608.198575] usb 5-1: configuration #1 chosen from 1 choice [ 4608.234905] cdc_acm 5-1:1.0: ttyACM0: USB ACM device [ 4608.237372] usbcore: registered new interface driver cdc_acm [ 4608.237385] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters I can provide access to the machine with device plugged into it. Thanks Clay
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AA1C9B80ADCD490EB24DC989A81439A4>