Date: Mon, 13 Dec 2010 16:33:15 +0300 From: Mike Barnard <mike.barnardq@gmail.com> To: Freddie Cash <fjwcash@gmail.com> Cc: freebsd-fs@freebsd.org Subject: Re: HAST role failure Message-ID: <AANLkTi=67KdWnZmTGKCgubO9ECA0hLu_2o3jH3ySKGUi@mail.gmail.com> In-Reply-To: <AANLkTinoZ8pTEi_aB4RRrpL-4BKbBiebo7TMsg0wTg_9@mail.gmail.com> References: <AANLkTim70T5rA=F-Nhrp=FtHHR8Njuwt9dfXaoH_z=8g@mail.gmail.com> <AANLkTinoZ8pTEi_aB4RRrpL-4BKbBiebo7TMsg0wTg_9@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Freddie, For some reason, I still get the same error even after destroying the journal. hastctl create shared [ERROR] [shared] Unable to open /dev/da0s1g: Operation not permitted. When I check the status on the primary, I get this: shared: role: init provname: shared localpath: /dev/da0s1g extentsize: 0 keepdirty: 0 remoteaddr: tcp4://172.19.254.15 replication: memsync dirty: 0 bytes I get the same log entry in var/log/messages: Dec 13 16:24:53 hastA hastd[2325]: [shared] (primary) Unable to open /dev/da0s1g: Operation not permitted. Dec 13 16:24:58 hastA hastd[2319]: [shared] (primary) Worker process exited ungracefully (pid=2325, exitcode=66). Is there a way I can destroy a hast resource once created? Regards, Mike On Fri, Dec 10, 2010 at 6:39 PM, Freddie Cash <fjwcash@gmail.com> wrote: > On Fri, Dec 10, 2010 at 5:05 AM, Mike Barnard <mike.barnardq@gmail.com> > wrote: > > I have setup HAST on 2 FreeBSD 8.1-STABLE, hastA being primary and hastB > > secondary. > > > > hastctl create mirror works with no problem on hastA, but when I run > hastctl > > role primary shared on the primary, it gives an error and fails: > > > > Dec 10 15:47:24 hastA hastd[9911]: [shared] (primary) Unable to open > > /dev/da0s1g.journal: Operation not permitted. > > Dec 10 15:47:29 hastA hastd[9888]: [shared] (primary) Worker process > exited > > ungracefully (pid=9911, exitcode=66). > > Create hast on the bare partition. > > Then create the gjournal device on top of the /dev/hast device. > > Then use the gjournal device for your filesystem. > > HAST really should be the lowest level in the storage chain. > > -- > Freddie Cash > fjwcash@gmail.com > -- Mike Of course, you might discount this possibility, but remember that one in a million chances happen 99% of the time. ------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTi=67KdWnZmTGKCgubO9ECA0hLu_2o3jH3ySKGUi>