Date: Sun, 26 Sep 2010 19:37:15 +0200 From: David DEMELIER <demelier.david@gmail.com> To: Jeremy Chadwick <freebsd@jdc.parodius.com> Cc: freebsd-stable <freebsd-stable@freebsd.org>, Andriy Gapon <avg@icyb.net.ua> Subject: Re: Failure to burn with ahci mode. Message-ID: <AANLkTikcMOrOctSrsUPYH%2BMc562-putxO8s94xgtVHpy@mail.gmail.com> In-Reply-To: <20100926172527.GA38405@icarus.home.lan> References: <AANLkTimH41m7Vckd3bCq%2BuwX_79sY7dP%2B0ZbwpnrJAkc@mail.gmail.com> <4C9F16F9.50707@icyb.net.ua> <AANLkTimAXa=1bas_GgvzRbPwzuSUn-VQHX9jWm0mRo50@mail.gmail.com> <20100926103836.GA33415@owl.midgard.homeip.net> <AANLkTimqTJbbc_45yLvGz93jPRm1k4YNkzzxvw%2BsE6n0@mail.gmail.com> <20100926172527.GA38405@icarus.home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
2010/9/26 Jeremy Chadwick <freebsd@jdc.parodius.com>: > On Sun, Sep 26, 2010 at 07:12:17PM +0200, David DEMELIER wrote: >> 2010/9/26 Erik Trulsson <ertr1013@student.uu.se>: >> > On Sun, Sep 26, 2010 at 11:53:01AM +0200, David DEMELIER wrote: >> >> 2010/9/26 Andriy Gapon <avg@icyb.net.ua>: >> >> > on 26/09/2010 12:31 David DEMELIER said the following: >> >> >> Hi, >> >> >> >> >> >> I posted this PR : http://www.freebsd.org/cgi/query-pr.cgi?pr=3Dke= rn/146464 >> >> >> >> >> >> I can't burn with the optical drive, I can read it but not burn. W= hen >> >> >> I try to use burncd it says >> >> >> >> >> >> acd0: FAILURE - MODE_SELECT_BIG timed out >> >> >> >> >> >> It's a >> >> >> Master: acd0 <hp DVDRAM GT20L/DC05> SATA revision 1.x >> >> >> =C2=A0 =C2=A0 Slave: =C2=A0 =C2=A0 =C2=A0 no device present >> >> >> >> >> >> I would love to use ahci instead of ide since it's really faster. = I >> >> >> don't know how I can help you more, >> >> >> >> >> >> FreeBSD Melon.malikania.fr 8.1-STABLE FreeBSD 8.1-STABLE #3: Sun S= ep >> >> >> 26 10:15:10 CEST 2010 >> >> >> root@Melon.malikania.fr:/usr/obj/usr/src/sys/Melon =C2=A0amd64 >> >> > >> >> > Try using ahci(4) driver. >> >> > >> >> > -- >> >> > Andriy Gapon >> >> > >> >> >> >> That's what I'm doing. >> > >> > If you were using the ahci(4) driver the optical drive ought to show u= p >> > as cd0 rather than acd0. >> > >> > Anyway, I think burncd will only work with the old ata(4) driver. =C2= =A0The >> > new ahci(4) and ada(4) drivers use the cam(4) system and looks pretty >> > much like SCSI drives to the rest of the system. >> > >> > Try the sysutils/cdrecord port for burning. (Should work with all SCSI >> > and ATAPI optical drives, regardless of which driver is used.) >> > >> > >> > >> > >> > -- >> > <Insert your favourite quote here.> >> > Erik Trulsson >> > ertr1013@student.uu.se >> > >> >> No it's still acd0, do I need atapicam as device in my kernel configurat= ion? >> >> Thanks for your answers. > > There's a difference between ataahci.ko ("device ataahci") and ahci.ko, > in case you're confusing to two. > > Can you please provide your loader.conf and kernel configuration file? > Thanks. > > -- > | Jeremy Chadwick =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 jdc@parodiu= s.com | > | Parodius Networking =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 http://www.parodius.com/ | > | UNIX Systems Administrator =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0Mountain View, CA, USA | > | Making life hard for others since 1977. =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0PGP: 4BD6C0CB | > > http://files.malikania.fr/Melon and http://files.malikania.fr/loader.conf markand@Melon ~ $ sudo camcontrol devlist <WDC WD3200BEKT-60F3T1 12.01A12> at scbus0 target 0 lun 0 (ada0) <hp DVDRAM GT20L DC05> at scbus1 target 0 lun 0 (cd0) markand@Melon ~ $ sudo cdrecord downloads/FreeBSD-8.1-RELEASE-amd64-livefs.= iso cdrecord: No write mode specified. cdrecord: Assuming -sao mode. cdrecord: If your drive does not accept -sao, try -tao. cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright (C) 1995-2010 J=C3=B6rg Schilling cdrecord: Error 0. Cannot open or use SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=3Dhelp'. markand@Melon ~ $ sudo cdrecord -scanbus Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright (C) 1995-2010 J=C3=B6rg Schilling cdrecord: Error 0. Cannot open or use SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=3Dhelp'. Cheers --=20 Demelier David
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTikcMOrOctSrsUPYH%2BMc562-putxO8s94xgtVHpy>