Date: Tue, 27 Jul 2010 16:10:20 +0600 From: =?KOI8-R?B?4czFy9PFyiD9xdLCwcvP1w==?= <schalexey@gmail.com> To: freebsd-hardware@freebsd.org Subject: Trables with RTL8169/8119 Message-ID: <AANLkTiku3FN7S84uuQu43frGnCsD-q9aLvQ-4Fk_F%2Bvr@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I have old machine with:
FreeBSD data-srv.HOME 8.0-RELEASE FreeBSD 8.0-RELEASE #1: Sun Jul 25
17:49:20 YEKST 2010
root@data-srv.HOME:/usr/src/sys/i386/compile/GENERIC i386
and 2 NIC interfaces:
re0@pci0:0:10:0: class=3D0x020000 card=3D0x816910ec chip=3D0x816910e=
c
rev=3D0x10 hdr=3D0x00
vendor =3D 'Realtek Semiconductor'
device =3D 'Single Gigabit LOM Ethernet Controller (RTL8119)'
class =3D network
subclass =3D ethernet
rl0@pci0:0:12:0: class=3D0x020000 card=3D0x813911f6 chip=3D0x813910e=
c
rev=3D0x10 hdr=3D0x00
vendor =3D 'Realtek Semiconductor'
device =3D 'Realtek RTL8139 Family PCI Fast Ethernet NIC
(RTL-8139/8139C/8139C)'
class =3D network
subclass =3D ethernet
In the beginning rl0 had conflict with onboard sound, as result sound
was disabled.
After that both card begin work, but re0 don=92t reaction on any action
(plug|unplug cable) in dmesg and don=92t ping from other PC in local.
data-srv# grep ^re /var/run/dmesg.boot
real memory =3D 402653184 (384 MB)
re0: <Realtek PCI GBE Family Controller> port 0xd000-0xd0ff mem
0xe7001000-0xe70010ff irq 12 at device 10.0 on pci0
re0: version:1.80
re0: Ethernet address: 00:e0:52:95:90:99
re0: Ethernet address: 00:e0:52:95:90:99
re0: [ITHREAD]
data-srv# grep ^rl /var/run/dmesg.boot
rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem
0xe7003000-0xe70030ff irq 10 at device 12.0 on pci0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:80:48:26:a0:3a
rl0: [ITHREAD]
re0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:e0:52:95:90:99
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
media: Ethernet autoselect
status: no carrier
rl0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3D8<VLAN_MTU>
ether 00:80:48:26:a0:3a
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Driver taken from Realteck site (v 1.8), builded as kernel module.
PS: sorry for bad English.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTiku3FN7S84uuQu43frGnCsD-q9aLvQ-4Fk_F%2Bvr>