Date: Thu, 15 Jul 2010 15:17:01 -0400 From: alexus <alexus@gmail.com> To: freebsd-questions@freebsd.org Subject: Re: ipnat.conf - map and rdr won't work! Message-ID: <AANLkTinh0CykJ1Av3f2THPDFOLS0YtYLDvRMHXm_wD3w@mail.gmail.com> In-Reply-To: <AANLkTilVTo36Fzdh2DKAQhRjyDj8MNUuV9dhwvQ7Gf-V@mail.gmail.com> References: <AANLkTilVTo36Fzdh2DKAQhRjyDj8MNUuV9dhwvQ7Gf-V@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 14, 2010 at 10:32 PM, alexus <alexus@gmail.com> wrote: > I can't put my mind around it, before reboot I was able to ssh in from > outside to my jail and right now I can't! > I even rebuild the whole system and even that didn't help:( > anyone have any ideas? > > su-3.2# cat /etc/ipnat.rules > map fxp0 lama -> 0/32 > rdr fxp0 64.52.58.58 port ssh -> lama port ssh tcp > su-3.2# grep lama /etc/hosts > 172.16.172.16 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 lama > su-3.2# ipnat -l > List of active MAP/Redirect filters: > map fxp0 172.16.172.16/32 -> 0.0.0.0/32 > rdr fxp0 64.52.58.58/32 port 22 -> 172.16.172.16 port 22 tcp > > List of active sessions: > su-3.2# ifconfig > vr0: flags=3D8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric > 0 mtu 1500 > =C2=A0 =C2=A0 =C2=A0 =C2=A0options=3D2808<VLAN_MTU,WOL_UCAST,WOL_MAGIC> > =C2=A0 =C2=A0 =C2=A0 =C2=A0ether 00:19:5b:68:9b:01 > =C2=A0 =C2=A0 =C2=A0 =C2=A0inet 172.16.172.16 netmask 0xffffffff broadcas= t 172.16.172.16 > =C2=A0 =C2=A0 =C2=A0 =C2=A0media: Ethernet autoselect (none) > =C2=A0 =C2=A0 =C2=A0 =C2=A0status: no carrier > fxp0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1= 500 > =C2=A0 =C2=A0 =C2=A0 =C2=A0options=3D2009<RXCSUM,VLAN_MTU,WOL_MAGIC> > =C2=A0 =C2=A0 =C2=A0 =C2=A0ether 00:0f:fe:aa:f4:61 > =C2=A0 =C2=A0 =C2=A0 =C2=A0inet 64.52.58.58 netmask 0xffffffe0 broadcast = 64.52.58.63 > =C2=A0 =C2=A0 =C2=A0 =C2=A0media: Ethernet autoselect (100baseTX <full-du= plex>) > =C2=A0 =C2=A0 =C2=A0 =C2=A0status: active > plip0: flags=3D108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 = mtu 1500 > lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > =C2=A0 =C2=A0 =C2=A0 =C2=A0inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > =C2=A0 =C2=A0 =C2=A0 =C2=A0inet6 ::1 prefixlen 128 > =C2=A0 =C2=A0 =C2=A0 =C2=A0inet 127.0.0.1 netmask 0xff000000 > su-3.2# jls > =C2=A0 JID =C2=A0IP Address =C2=A0 =C2=A0 =C2=A0Hostname =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Path > =C2=A0 =C2=A0 1 =C2=A0172.16.172.16 =C2=A0 lama =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0/usr/jail= /lama > su-3.2# grep ^ipnat_enable /etc/rc.conf > ipnat_enable=3D"YES" > su-3.2# grep ^gateway_enable /etc/rc.conf > gateway_enable=3D"YES" > su-3.2# sysctl net.inet.ip.forwarding > net.inet.ip.forwarding: 1 > su-3.2# > > and this is me from outside trying to ssh to my box and getting time out.= .. > > mp:~ alexus$ ssh -v jothost.com > OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 > debug1: Reading configuration data /etc/ssh_config > debug1: Connecting to jothost.com [64.52.58.58] port 22. > debug1: connect to address 64.52.58.58 port 22: Operation timed out > ssh: connect to host jothost.com port 22: Operation timed out > mp:~ alexus$ > > > -- > http://alexus.org/ > anyone? --=20 http://alexus.org/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTinh0CykJ1Av3f2THPDFOLS0YtYLDvRMHXm_wD3w>