Date: Mon, 29 Apr 2002 13:24:50 -0700 From: "Blane R. Boynton" <bboynton@u.arizona.edu> To: "Lutz Horn" <lutz@lutz-horn.de> Cc: "FreeBSD Questions" <FreeBSD-questions@FreeBSD.org> Subject: RE: Xircom CreditCard 10/100 Configuration Message-ID: <ACEHLJHCNJIBDGAKLNNHEENBCDAA.bboynton@u.arizona.edu> In-Reply-To: <20020429194554.GA6406@lutz-horn.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Lutz,
I am having a very similar problem with my NetGear FA410TX. No matter what I
do, the card configures with an IRQ of 3, regardless of what I say in
pccard.conf, it even configs to IRQ 3 when I use pccardc enabler. It seems
the consensus is to try and use the fa_select utility to try and configure
the card. I will try that this afternoon and post my results. If anyone else
has any other suggestions forward them along
-----Original Message-----
From: owner-freebsd-questions@FreeBSD.ORG
[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Lutz Horn
Sent: Monday, April 29, 2002 12:46
To: Mark Rowlands
Cc: freebsd-questions@freebsd.org
Subject: Re: Xircom CreditCard 10/100 Configuration
Hi Mark and the others,
thanks for your time and effort but I'm still not there.
* Mark Rowlands <mark.rowlands@minmail.net> [20020429 14:01 +0200]:
> and see what irqs are being reported as in use
OK, as you guessed irq 3 is in use by sio1. In fact the following irqs
are in use:
1 atkbd0
3 sio1
4 sio0
6 fdc0
7 ppc0
11 pcic0, pcic1, uhci0 (why this?)
12 psm0
14 ata0
> try the following pccardd.conf assuming irq 3 is not in use by
> something else.... like sio1: for example.....
>
> # pccardd.conf
>
> io 0x240-0x360
>
> irq 3
>
> # Available memory slots
> memory 0xd4000 96k
>
> # Xircom CreditCard Ethernet CE3-10/100
> card "Xircom" "CreditCard 10/100"
> config auto "xe" ?
> insert /etc/pccard_ether $device start
> remove /etc/pccard_ether $device stop
If I use pccardc to dump information about the card I get a list of irqs
the card seems to be willing to use: 2 3 4 5 7 9 10 11 15. So I put the
intersection
{i|i is irq not in use} ^ {j|j is irq card likes} = {2, 5, 9, 10, 15}
in the irq line in /etc/pccard.conf. Starting pccardd with this
configurations still fails :-( With debuglevel set to 4 I get the
following output from pccardd:
1 Apr 29 21:31:43 pccardd[148]: Card "Xircom"("CreditCard 10/100")
[CE3-10/100] [1.00] matched "Xircom" ("CreditCard 10/100") [(null)]
[(null)]
2 Apr 29 21:31:43 pccardd[148]: Using mem addr 0xd4000, size 4096, card
addr 0x0, flags 0x41
3 Apr 29 21:31:43 pccardd[148]: Using I/O addr 0x240, size 16
4 Apr 29 21:31:43 pccardd[148]: Setting config reg at offs 0x800 to
0x41, Reset time = 50 ms
5 Apr 29 21:31:48 pccardd[148]: Assigning I/O window 0, start 0x240,
size 0x10 flags 0x7
6 Apr 29 21:31:48 pccardd[148]: Assign xe0, io 0x240-0x24f, mem
0xd4000, 4096 bytes, irq 11, flags 0
7 Apr 29 21:31:48 pccardd[148]: driver allocation failed for
Xircom(CreditCard 10/100): Device not configured
8 Apr 29 21:31:48 pccardd[148]: pccardd started
What puzzles me is that in line 6 the correct device "xe0" and the
correct io range "0x240-24f" are reported. But the irq is reported as
"11" which is a) already in use and b) not in the list of irqs in
/etc/pccard.conf.
Any ideas?
Regards
Lutz
--
Lutz Horn <lutz@lutz-horn.de> | GnuPG: 1024D/6EBDA359 1999-09-20
438D 31FC 9300 CED0 1CDE A19D CD0F 9CA2 6EBD A359
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ACEHLJHCNJIBDGAKLNNHEENBCDAA.bboynton>