Date: Mon, 1 Apr 2019 08:52:55 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: ticso@cicely.de Cc: "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: Re: network booting allwinner(nanopi) Message-ID: <AFF3D38B-6FC0-496A-94D4-90F875E030BB@cs.huji.ac.il> In-Reply-To: <20190329193608.GC99439@cicely7.cicely.de> References: <D749F3E0-CCB9-4D13-A011-1914362C0F5E@cs.huji.ac.il> <20190329193608.GC99439@cicely7.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
> On 29 Mar 2019, at 22:36, Bernd Walter <ticso@cicely7.cicely.de> = wrote: >=20 > On Fri, Mar 29, 2019 at 09:34:30AM +0300, Daniel Braniss wrote: >> Hi, >> with last weeks head (r345465), >> I tried - again - to netboot and the old way no longer works >> usb start >> setenv loaderdev net >> boot >>=20 >> now it complains allot:-) but no dice. >> So, is there a way that netboot works? >=20 > On a Pi1 project I put the following in loader.conf: > currdev=3D"net0" > This requires the loader.conf to be on the SD card however. > I used an UFS partition for that, but I assume that the msdosfs > partition would work too as the loader can read that filesystem > as well. >=20 > --=20 > B.Walter <bernd@bwct.de> http://www.bwct.de > Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm. well, this is what I get: U-Boot SPL 2019.01 (Mar 24 2019 - 10:15:37 +0200) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2019.01 (Mar 24 2019 - 10:15:37 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... *** Warning - bad CRC, using default = environment In: serial Out: serial Err: serial Net: phy interface0 Error: ethernet@1c30000 address not set. eth-1: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 2 =08=08=08 0 =3D> usb start =3D> boot=08 =08=08 =08=08 =08=08 =08setn=08 =08env loaderdev net =3D> boot switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 199 bytes read in 1 ms (194.3 KiB/s) ## Executing script at 43100000 375752 bytes read in 19 ms (18.9 MiB/s) ## Starting application at 0x42000000 ... Consoles: U-Boot console =20 Compatible U-Boot API signature found @0x5bf595c8 FreeBSD/armv7 U-Boot loader, Revision 1.2 DRAM: 512MB Number of U-Boot devices: 1 U-Boot env: loaderdev=3D'net' Found U-Boot device: disk Found U-Boot device: net Booting from net0: net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed Startup error in /boot/lua/loader.lua: LUA ERROR: cannot open /boot/lua/loader.lua: device not configured. net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed net_probe: no network devices found, maybe not enumerated yet..? netboot: couldn't probe uboot_eth0 net_open: netif_open() failed can't load 'kernel' Type '?' for a list of commands, 'help' for more detailed help. loader>=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AFF3D38B-6FC0-496A-94D4-90F875E030BB>