Date: Fri, 12 Oct 2012 09:38:59 +0200 From: =?iso-8859-1?Q?R=E9mi_Pauchet?= <remi.pauchet@netasq.com> To: Jack Vogel <jfvogel@gmail.com> Cc: freebsd-net@freebsd.org Subject: Re: ixgbe and ixgbevf drivers are not working in virtualization environment Message-ID: <B0DB1464-D65E-4856-99DD-2C688D3CC731@netasq.com> In-Reply-To: <CAFOYbcmYn_44dMc0OiTqWpvQvas1biY0AUJvxqZ_%2Bn1ZApEn4g@mail.gmail.com> References: <792D5931-19E7-4239-A3E8-5D2BC90F03FD@netasq.com> <CAFOYbcmYn_44dMc0OiTqWpvQvas1biY0AUJvxqZ_%2Bn1ZApEn4g@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail=_50966ACF-B5F3-4459-8A0B-B5B7E190FCF3 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=iso-8859-1 Hi, Unfortunately not: ix0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu = 1500 = options=3D401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU= M,TSO4,VLAN_HWTSO> ether 00:e0:ed:1c:99:4e inet 172.16.255.254 netmask 0xffff0000 broadcast 172.16.255.255 inet6 fe80::2e0:edff:fe1c:994e%ix0 prefixlen 64 scopeid 0x2=20 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu = 1500 = options=3D401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU= M,TSO4,VLAN_HWTSO> ether 00:e0:ed:1c:99:4f inet 172.17.255.254 netmask 0xffff0000 broadcast 172.17.255.255 inet6 fe80::2e0:edff:fe1c:994f%ix1 prefixlen 64 scopeid 0x3=20 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Regards, R=E9mi Le 11 oct. 2012 =E0 18:25, Jack Vogel a =E9crit : > The ixgbe device will not get link until you have run init, so assign = it an address or just do an ifconfig up. >=20 > I have never used the driver using a passthru type setup but I believe = its been done successfully if > memory serves. >=20 > Jack >=20 >=20 > On Thu, Oct 11, 2012 at 8:39 AM, R=E9mi Pauchet = <remi.pauchet@netasq.com> wrote: > Hi, >=20 > I'm trying to use the ixgbe (10Gb) driver in a FreeBSD virtual machine = on an esxi 5 using DirectPath (PCI Passthrough) and the card is = detected, but I can't get a link (status: no carrier) >=20 > ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.3.11> = mem 0xd2420000-0xd243ffff,0xd2400000-0xd2403fff irq 18 at device 0.0 on = pci3 >=20 > ix0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > = options=3D401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU= M,TSO4,VLAN_HWTSO> > ether 00:e0:ed:1c:99:4e > nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect > status: no carrier >=20 > I have also tested with XenServer 6, using SR-IOV (ixgbevf driver) = with the same result: the driver is loading, but no link detected. >=20 > In both case (VMWare DirectPath and XenServer SR-IOV), I tested Linux = with success. >=20 >=20 > The card is an Intel 82599EB, the motherboard is an Intel X58 = (supermicro X8ST3) with a Xeon W3680 and I've tested FreeBSD 8.3 and 9.0 >=20 > I've found a forum thread with the same issue: = http://forums.freebsd.org/showthread.php?t=3D29855 and no answer :) >=20 >=20 > Please find in attachment the dmesg (boot -v) with the ix driver = compiled with DEBUG flags using vmware. >=20 >=20 > Can anyone provide feedback about this issue ? >=20 > Regards, > R=E9mi Pauchet >=20 >=20 >=20 --Apple-Mail=_50966ACF-B5F3-4459-8A0B-B5B7E190FCF3--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B0DB1464-D65E-4856-99DD-2C688D3CC731>