Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 May 2001 14:11:40 -0700
From:      Drew Tomlinson <drewt@writeme.com>
To:        'Bill Moran' <wmoran@iowna.com>, 'Peter' <fbsdq@yahoo.com>, bblack@allstor-sw.co.uk, freebsd-questions@freebsd.org
Subject:   RE: FreeBSD - Windows '98 performance
Message-ID:  <BA5D0CE1CBB2D411B6AA00A0CC3F02390AFA13@ldcmsx01.lc.ca.gov>
In-Reply-To: <01C0E395.284DE640.wmoran@iowna.com>

next in thread | previous in thread | raw e-mail | index | archive | help
I'm having the same problem using Sharity Light and have thus, been watching
this thread.

My Win2K box has a NetGear 100mbps card and my FSBD 4.3 is using an the
integrated 100mbps card in my HP E60 NetServer.  The HP card is seen as
fxp0: <Intel Pro 10/100B/100+ Ethernet> on boot up.  All work is done from
the FSBD box.  I can receive from the Win2K at sufficient speed but sending
to the Win2K is EXTREMELY slow.  It took me well over a half hour to send a
50M file to the Win2K box.

My network configuration is as follows:

ISP <-> 3Com 812 ADSL Router <-> TrendNet 10/100 Switch <-> Win2K and FBSD.
The router is also my DNS server and does NAT for my internal network.

ifconfig output:

fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255
        inet6 fe80::2e0:18ff:fec4:f45e%fxp0 prefixlen 64 scopeid 0x1
        ether 00:e0:18:c4:f4:5e
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UT
P <full-duplex> 10baseT/UTP
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
faith0: flags=8000<MULTICAST> mtu 1500
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552

ipconfig /all output from the Win2K box:

Windows 2000 IP Configuration

        Host Name . . . . . . . . . . . . : bigdaddy
        Primary DNS Suffix  . . . . . . . : mykitchentable.net
        Node Type . . . . . . . . . . . . : Broadcast
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : mykitchentable.net

Ethernet adapter NetGear:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : NETGEAR FA310TX Fast Ethernet
Adapte
r (NGRPCI)
        Physical Address. . . . . . . . . : 00-A0-CC-5D-C3-70
        DHCP Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.0.3
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.0.1
        DNS Servers . . . . . . . . . . . : 192.168.0.1

Thanks,

Drew

> -----Original Message-----
> From: Bill Moran [mailto:wmoran@iowna.com]
> Sent: Wednesday, May 23, 2001 11:32 AM
> To: 'Peter'; 'bblack@allstor-sw.co.uk';
> 'freebsd-questions@freebsd.org'
> Subject: RE: FreeBSD - Windows '98 performance
>
>
> Both:
> Send output from an ifconfig command to the list as well as
> details of the
> network: it will help others to help you.
>
> Ben:
> Try turning oplocks off in Samba on the FreeBSD box. Windows
> 95 handles
> oplocks very badly and I believe (although I don't know for
> sure) that
> Windows 98 has the same problem. FreeBSD does kernel oplocks,
> whereas Linux
> does not, so that explains the speed difference there, while
> Windows NT
> handles oplocks fairly well. I may be wrong on this, but it
> seems like
> that's what the problem is.
> Also, try an ftp transfer from the M$ boxes to/from the
> FreeBSD box and see
> if you get the same behaviour. That will help you determine
> whether it's
> Samba or FreeBSD that's the problem.
>
> -Bill
>
> -----Original Message-----
> From:	Peter [SMTP:fbsdq@yahoo.com]
> Sent:	Wednesday, May 23, 2001 11:24 AM
> To:	bblack@allstor-sw.co.uk; freebsd-questions@freebsd.org
> Subject:	Re:FreeBSD - Windows '98 performance
>
> I am having the same damn problem.
>
> Win to Win == 2.5MB/sec
> FreeBSD to Win = 200kb/sec
> FreeBSD to FreeBSD = 200 - 500 kb/sec.
>
> This was tested with 30MB file via ftp [ftp server is both on
> Windows and
> FreeBSD, tested both ways.]
>
> Are you using LINKSYS LNE100TX cards by any chance using the
> dc0 driver??
>
>
> On 05/23/2001 9:10:13 AM, bblack@allstor-sw.co.uk is quoted as saying:
>
>
> . . . .|Please help!
> . . . .|
> . . . .|I am running Samba 2.0.7 on a FreeBSD (4.1) RAID box.
> Copying files
> of
> . . . .|approximately 500Kb from a Windoze '98 box is giving
> absoultely
> dire
> . . . .|performance, in the region of 500Kb/s.
> . . . .|
> . . . .|On the same network I have run the same test from NT
> - FreeBSD
> which gives
> . . . .|about 3.7Mb/s and from Windoze '98 - Linux (running
> Samba 2.0.7)
> which
> . . . .|gives around 4Mb/s so it appears the problem is to do
> with FreeBSD.
> . . . .|
> . . . .|The fact that Win98 - Linux provides decent figures
> suggests it
> isn't a
> . . . .|Samba thing which was my first suspicion but I have
> reached the end
> of the
> . . . .|road with what to try next.
> . . . .|
> . . . .|Any advice/suggestions would be gratefully received.
> . . . .|
> . . . .|Thanks,
> . . . .|
> . . . .|Ben Black
> . . . .|
> . . . .|
> . . . .|To Unsubscribe: send mail to majordomo@FreeBSD.org
> . . . .|with "unsubscribe freebsd-questions" in the body of
> the message
>
>
>
> www.nul.cjb.net
> www.FreeBSD.org
>
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BA5D0CE1CBB2D411B6AA00A0CC3F02390AFA13>