Date: Fri, 20 Jun 2003 03:01:06 +0000 From: "Lee Harr" <missive@hotmail.com> To: freebsd-questions@freebsd.org Subject: Re: nforce2 or KT400 Message-ID: <BAY2-F146EsGmjm08Iy00000c56@hotmail.com>
next in thread | raw e-mail | index | archive | help
This is from my asus A7N8X-deluxe.
One of the onboard nics works for sure. AGP works for regular video,
but I have not got the 3d acceleration (DRI/DRM) working. Not sure if
the sound actually works or not either...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #4: Thu May 22 15:40:19 EDT 2003
lee@homer:/usr/obj/usr/src/sys/HOMER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1664159027 Hz
CPU: AMD Athlon(tm) XP 2000+ (1664.16-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x680 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (524224K bytes)
avail memory = 518213632 (506068K bytes)
Preloaded elf kernel "kernel" at 0xc0403000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x10de, dev=0x01eb) at 0.1
pci0: <unknown card> (vendor=0x10de, dev=0x01ee) at 0.2
pci0: <unknown card> (vendor=0x10de, dev=0x01ed) at 0.3
pci0: <unknown card> (vendor=0x10de, dev=0x01ec) at 0.4
pci0: <unknown card> (vendor=0x10de, dev=0x01ef) at 0.5
isab0: <PCI to ISA bridge (vendor=10de device=0060)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x10de, dev=0x0064) at 1.1
ohci0: <OHCI (generic) USB controller> mem 0xed087000-0xed087fff irq 5 at
device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xed082000-0xed082fff irq 3 at
device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <USB controller> at 2.2 irq 5
pci0: <unknown card> (vendor=0x10de, dev=0x0066) at 4.0 irq 3
pci0: <unknown card> (vendor=0x10de, dev=0x006b) at 5.0 irq 3
pcm0: <Nvidia nForce2 AC97 controller> port 0xd400-0xd47f,0xd000-0xd0ff mem
0xed080000-0xed080fff irq 5 at device 6.0 on pci0
pcm0: <Realtek ALC650 ac97 codec>
pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x1095, dev=0x3112) at 11.0 irq 11
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f at device 9.0 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI to PCI bridge (vendor=10de device=006d)> at device 12.0 on pci0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f mem
0xe7000000-0xe700007f irq 5 at device 1.0 on pci2
xl0: Ethernet address: 00:26:54:0a:df:a2
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: vendor=10de, dev=6e
fwohci0: <1394 Open Host Controller Interface> mem
0xed085000-0xed08503f,0xed084000-0xed0847ff irq 11 at device 13.0 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:16:af:0a
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:16:af:0a
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
pcib3: <PCI to PCI bridge (vendor=10de device=01e8)> at device 30.0 on pci0
pci3: <PCI bus> on pcib3
drm0: <Matrox G400/G450 (AGP)> mem
0xe9000000-0xe97fffff,0xe8000000-0xe8003fff,0xe4000000-0xe5ffffff irq 11 at
device 0.0 on pci3
error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module.
device_probe_and_attach: drm0 attach returned 12
orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcd7ff,0xce000-0xce7ff
on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model NetMouse/NetScroll Optical, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 38166MB <WDC WD400JB-00ENA0> [77545/16/63] at ata0-master BIOSDMA
acd0: CD-RW <LITE-ON LTR-52246S> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY2-F146EsGmjm08Iy00000c56>