Date: Wed, 11 Aug 2004 16:40:58 -0700 From: "Evan Dower" <evantd@hotmail.com> To: freebsd-current@freebsd.org Subject: Project Evil: TI ACX111 non-success Message-ID: <BAY8-F44VVZp3SIbwXO0000f1d9@hotmail.com>
next in thread | raw e-mail | index | archive | help
I've been trying to get the ndisulator to work for my NetGear WG311v2 so I can take the ethernet cables and switches offthe floor in my hall. The following is the "conversation" I've had with Bill Paul. It is perhaps best to read from the bottom up to get the chronology right. Also, as it turns out the net/acx100 port makes no claim to support the acx111, and I was eventually able to build and load it, though of course it didn't work because it doesn't support the acx111. Any help would be greatly appreciated. -- I managed to get rid of the "can't re-use a leaf" messaged by deleting the duplicate entry in ndis_driver_data.h. For some reason, whenever I try to load if_ndis.ko (ndis.ko is already loaded), I get messages about amdpm. Perhaps ndis returning 6 and failing to load is a result of the same return value from trying to attach amdpm. amdpm0: <AMD 756/766/768/8111 Power Management Controller> port 0xe4e0-0xe4ff at device 7.3 on pci0 amdpm0: could not map i/o space device_attach: amdpm0 attach returned 6 ndis0: <NETGEAR WG311v2 802.11g Wireless PCI Adapter> mem 0xf0800000-0xf081ffff,0xf1000000-0xf1001fff irq 17 at device 6.0 on pci2 ndis0: [GIANT-LOCKED] no match for srand ndis0: NDIS API version: 5.1 ndis0: init handler failed device_attach: ndis0 attach returned 6 Thanks again, Evan Dower El mar, 20-07-2004 a las 10:58, Evan Dower escribió: >I have figured out that the "can't re-use a leaf" message is coming from >trying to register a sysctl, which comes from the .inf file. This seems >to indicate some limitations on the complexity of .inf files that can be >properly parsed and turned into a list of sysctls. Since I'm not exactly >sure what those limitations are, I'm sending you a link to the .inf file >(and the .sys file for good measure)· Other than that, it looks like >srand might just need to be plugged into one of the function tables >(probably the hal table, I guess). Also, if you can tell me what >limitations exist for the .inf file, I will gladly modify it to work and >make it available to other WG311v2 owners. >Thanks again, >Evan Dower >Note: Much of the .inf file (anything not for XP) is commented out in an >attempt to make things work. This was my doing. It didn't ship that way. >Since I don't really understand the Windows registry, I didn't get too >adventurous. > >Files at: http://students.washington.edu/evantd/pub/evil/ > >El lun, 12-07-2004 a las 16:05, Evan Dower escribió: > > I have a Netgear WG311v2. The v2 turns out to be very important as the > > original (v1 you might call it now) was based on an Atheros AR5212 and > > was thus supported by the ath driver. v2 is based on the the TI AXC111 > > (aka TNETW1130), which should be supported by the net/acx100 port, but > > if_acx.ko fails to load due to a missing __panic symbol. Following the > > instructions you posted in an email, I made ndis_driver_data.h and > > built and loaded the if_ndis.ko module (after loading ndis.ko or > > compiling it into the kernel). I used the Windows XP .SYS and .INF > > files, though the Windows 2000 versions gave the same result, the > > Windows 98 files produced a module that panicked on load, and I didn't > > try the Windows ME files. The following is the output from `make > > load`. > > > /sbin/kldload -v /usr/current/src/sys/modules/if_ndis/if_ndis.ko > > ndis0: <NETGEAR WG311v2 802.11g Wireless PCI Adapter> mem > > 0xec800000-0xec81ffff, > > 0xed000000-0xed001fff irq 17 at device 6.0 on pci2 > > ndis0: [GIANT-LOCKED] > > can't re-use a leaf (dot11DesiredBSSType)! > > no match for srand > > ndis0: NDIS API version: 5.1 > > ndis0: init handler failed > > device_attach: ndis0 attach returned 6 > > Loaded /usr/current/src/sys/modules/if_ndis/if_ndis.ko, id=11 > > > Loading the module does not create /dev/ndis0 or /dev/if_ndis0 (or > > anything of the sort). I am running today's -CURRENT. > > > It seems that it requires srand, and I assume the 'can't re-use a leaf > > (dot11DesiredBSSType)!' is also a show-stopper. I ordered my card from > > newegg.com for about $50. > > > If there is anything else you might be interested in (a verbose boot > > log, copies of the .SYS and .INF files, testing for patches, etc.), > > just let me know. I'd be happy to help (especially since the result is > > a working wireless connection). > > > Thanks very much, -- Evan Dower Undergraduate, Computer Science University of Washington Public key: http://students.washington.edu/evantd/pgp-pub-key.txt Key fingerprint = D321 FA24 4BDA F82D 53A9 5B27 7D15 5A4F 033F 887D _________________________________________________________________ Don’t just search. Find. Check out the new MSN Search! http://search.msn.click-url.com/go/onm00200636ave/direct/01/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY8-F44VVZp3SIbwXO0000f1d9>