Date: Thu, 10 Jul 2003 08:18:14 -0700 From: Luke Cowell <lukec@gateway.e-and-s.com> To: <freebsd-questions@freebsd.org> Subject: Re: mpd - question Message-ID: <BB32D1C6.6D5%lukec@gateway.e-and-s.com> In-Reply-To: <004201c346f0$798105e0$0701a8c0@darryl>
next in thread | previous in thread | raw e-mail | index | archive | help
No, it's not dialup only.... You're on the right track using mpd, but again
that really depends on what you're trying to accomplish with your VPN. As
you've probably noticed there are several different types of VPN setup. I
use mpd for users on the road or working from home to securely access
services inside our private network.
I thought I'd include this config because I didn't think it was easy to
figure out how to enable simultaneous connections. This is set up for 2
simultaneous connections, but could easily be expanded.
s3rv3r# cat mpd/mpd.conf
default:
load pptp0
load pptp1
pptp0:
new -i ng0 pptp0 pptp0
set iface disable on-demand
set iface enable proxy-arp
set iface idle 1800
set bundle disable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp ranges 10.1.1.02/32 10.1.1.03/32
set ipcp dns 192.168.10.128
#
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
#
#set bundle enable compression
#set ccp yes mppc
#set ccp yes mpp-e40
#set ccp yes mpp-e128
#set ccp yes mpp-stateless
pptp1:
new -i ng1 pptp1 pptp1
set iface disable on-demand
set iface enable proxy-arp
set iface idle 1800
set bundle disable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp ranges 10.1.1.12/32 10.1.1.13/32
set ipcp dns 192.168.10.128
#
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
#
#set bundle enable compression
#set ccp yes mppc
#set ccp yes mpp-e40
#set ccp yes mpp-e128
#set ccp yes mpp-stateless
Luke
> From: "Darryl Hoar" <darryl@osborne-ind.com>
> Reply-To: darryl@osborne-ind.com
> Date: Thu, 10 Jul 2003 09:35:12 -0500
> To: <freebsd-questions@freebsd.org>
> Subject: mpd - question
>
> I was reading a howto on setting up a vpn server for use with
> microsoft clients. It discussed the mpd port. The entire howto
> seem to imply dailup networking and modems. The server
> I'm thinking about setting up would live on a DSL connection
> (not ADSL). Can mpd work with a DSL connection ?
>
> I'm a newbie at VPN so still groping in the dark.
>
> thanks
> Darryl
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BB32D1C6.6D5%lukec>