Date: Tue, 14 Sep 2010 22:24:16 +0200 From: Stefan Bethke <stb@lassitu.de> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: freebsd-current <freebsd-current@freebsd.org> Subject: Re: AR9132 CPU and AR9100 wireless support Message-ID: <BC23E72F-0E33-4DE0-B76E-C34FB6787BB2@lassitu.de> In-Reply-To: <AANLkTimBmNPdFMyMAVTwo2LTJpe0Zcrhye0yr-wpdRLf@mail.gmail.com> References: <AANLkTimBmNPdFMyMAVTwo2LTJpe0Zcrhye0yr-wpdRLf@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Am 14.09.2010 um 11:35 schrieb Adrian Chadd: > Hi everyone, >=20 > I've just pushed the initial support for the AR9100 wireless MAC into > my git repository. This is for the WMAC on the AR9132 SoC. >=20 > I've tested it in 11bg hostap mode on an AP83 derived box - the > TP-Link TL-WR1043ND. The source tree has support for the CPU, ethernet > (but not the switch PHY; it's enough to get data across it!); flash > and the AR9100 WMAC. >=20 > I've only tested "open" hostap mode on 11bg on a fixed channel. >=20 > The GIT repo is at: > http://www.gitorious.org/~adrianchadd/freebsd/adrianchadd-freebsd ; > it's the "work/atheros" branch. You'll need to open the unit up, > solder on some pins to get to the serial port and acquire a TTL -> > RS232 level converter. There's pictures and howto on the OpenWRT wiki: > http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd That sounds really nice! Is there some guide on how to prepare an = image? I'm quite familiar with OpenWrt (patching and building) and have = a number of routers (WRT-160N, WR941NL, 500gP) with serial adapters = attached, but from the messages on the mips list, it felt the = bootstrapping process might be a bit dauting... Stefan --=20 Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BC23E72F-0E33-4DE0-B76E-C34FB6787BB2>