Date: Wed, 23 Sep 1998 16:48:03 -0600 From: Ross Gardner <rgardner@interfold.com> To: "'freebsd-questions@FreeBSD.org'" <freebsd-questions@FreeBSD.ORG> Subject: Kernel Make command problems Message-ID: <C3EE7883164FD211AFAF00A0C978C7528EA0@roxanne.interfold.com>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01BDE744.39417368 Content-Type: text/plain aha1742.o: Undefined symbol `_eisa_match_dev' referenced from text segment aha1742.o: Undefined symbol `_eisa_add_iospace' referenced from text segment aha1742.o: Undefined symbol `_eisa_add_intr' referenced from text segment aha1742.o: Undefined symbol `_eisa_registerdev' referenced from text segment aha1742.o: Undefined symbol `_eisa_reg_start' referenced from text segment aha1742.o: Undefined symbol `_eisa_reg_iospace' referenced from text segment aha1742.o: Undefined symbol `_eisa_reg_end' referenced from text segment aha1742.o: Undefined symbol `_eisa_reg_end' referenced from text segment aha1742.o: Undefined symbol `_eisa_reg_intr' referenced from text segment aha1742.o: Undefined symbol `_eisa_reg_end' referenced from text segment aha1742.o: Undefined symbol `_eisa_reg_end' referenced from text segment aha1742.o: Undefined symbol `_eisa_enable_intr' referenced from text segment aha1742.o: Undefined symbol `_eisa_release_intr' referenced from text segment <<LUANNE>> Ross Gardner VP Interfold LLC Support@interfold.com <mailto:Support@interfold.com> www.interfold.com <http://www.interfold.com>; 303.592.7833 ------_=_NextPart_000_01BDE744.39417368 Content-Type: application/octet-stream; name="LUANNE" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="LUANNE" #=0A= # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks=0A= #=0A= # For more information read the handbook part System Administration -> = =0A= # Configuring the FreeBSD Kernel -> The Configuration File. =0A= # The handbook is available in /usr/share/doc/handbook or online as=0A= # latest version from the FreeBSD World Wide Web server =0A= # <URL:http://www.FreeBSD.ORG/>=0A= #=0A= # An exhaustive list of options and more detailed explanations of the = =0A= # device lines is present in the ./LINT configuration file. If you are = =0A= # in doubt as to the purpose or necessity of a line, check first in = LINT.=0A= #=0A= # $Id: GENERIC,v 1.77.2.25 1998/07/20 20:11:04 msmith Exp $=0A= =0A= machine "i386"=0A= #cpu "I386_CPU"=0A= cpu "I486_CPU"=0A= #cpu "I586_CPU"=0A= #cpu "I686_CPU"=0A= ident luanne=0A= maxusers 10=0A= =0A= #options MATH_EMULATE #Support for x87 emulation=0A= options INET #InterNETworking=0A= options FFS #Berkeley Fast Filesystem=0A= #options NFS #Network Filesystem=0A= #options MSDOSFS #MSDOS Filesystem=0A= #options "CD9660" #ISO 9660 Filesystem=0A= #options PROCFS #Process filesystem=0A= options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]=0A= #options SCSI_DELAY=3D15 #Be pessimistic about Joe SCSI device=0A= options BOUNCE_BUFFERS #include support for DMA bounce buffers=0A= options UCONSOLE #Allow users to grab the console=0A= options FAILSAFE #Be conservative=0A= options USERCONFIG #boot -c editor=0A= options VISUAL_USERCONFIG #visual boot -c editor=0A= options QUOTA=0A= =0A= config kernel root on wd0=0A= =0A= controller isa0=0A= controller eisa0=0A= controller pci0=0A= =0A= controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr=0A= disk fd0 at fdc0 drive 0=0A= #disk fd1 at fdc0 drive 1=0A= # Unless you know very well what you're doing, leave ft0 at drive 2, = or=0A= # remove the line entirely if you don't need it. Trying to = configure=0A= # it on another unit might cause surprises, see PR kern/7176.=0A= #tape ft0 at fdc0 drive 2=0A= =0A= #options "CMD640" # work around CMD640 chip deficiency=0A= controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr=0A= disk wd0 at wdc0 drive 0=0A= disk wd1 at wdc0 drive 1=0A= =0A= #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr=0A= #disk wd2 at wdc1 drive 0=0A= #disk wd3 at wdc1 drive 1=0A= =0A= #options ATAPI #Enable ATAPI support for IDE bus=0A= #options ATAPI_STATIC #Don't do it as an LKM=0A= #device wcd0 #IDE CD-ROM=0A= #device wfd0 #IDE floppy (LS-120)=0A= =0A= # A single entry for any of these controllers (ncr, ahb, ahc, amd) = is=0A= # sufficient for any number of installed devices.=0A= =0A= controller ncr0=0A= controller amd0=0A= controller ahb0=0A= controller ahc0=0A= controller dpt0=0A= controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr=0A= controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector = uhaintr=0A= controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector = ahaintr=0A= controller aic0 at isa? port 0x340 bio irq 11 vector aicintr=0A= controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr=0A= controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr=0A= controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector = seaintr=0A= =0A= options DPT_MEASURE_PERFORMANCE # Required by DPT driver??=0A= #options DPT_VERIFY_HINTR # Some hardware must have it!=0A= #options DPT_TRACK_CCB_STATES # Some hardware must have it!=0A= #options DPT_HANDLE_TIMEOUTS # Some hardware must have it!=0A= #options DPT_TIMEOUT_FACTOR=3D4 # Some hardware needs more=0A= =0A= controller scbus0=0A= =0A= device sd0=0A= =0A= device od0 #See LINT for possible `od' options.=0A= =0A= device st0=0A= =0A= device cd0 #Only need one of these, the code dynamically grows=0A= =0A= device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr=0A= device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr=0A= =0A= controller matcd0 at isa? port 0x230 bio=0A= =0A= device scd0 at isa? port 0x230 bio=0A= =0A= # syscons is the default console driver, resembling an SCO console=0A= device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr=0A= # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console = driver=0A= device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint=0A= options XSERVER # support for X server=0A= #options FAT_CURSOR # start with block cursor=0A= # If you have a ThinkPAD, uncomment this along with the rest of the = PCVT lines=0A= #options PCVT_SCANSET=3D2 # IBM keyboards are non-std=0A= =0A= # Mandatory, don't remove=0A= device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr=0A= =0A= #=0A= # Laptop support (see LINT for more options)=0A= #=0A= #device apm0 at isa? disable # Advanced Power Management=0A= #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS=0A= # PCCARD (PCMCIA) support=0A= #controller card0=0A= #device pcic0 at card?=0A= #device pcic1 at card?=0A= =0A= #device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr=0A= #device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr=0A= #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector = siointr=0A= #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector = siointr=0A= =0A= #device lpt0 at isa? port? tty irq 7 vector lptintr=0A= #device lpt1 at isa? port? tty=0A= #device mse0 at isa? port 0x23c tty irq 5 vector mseintr=0A= =0A= device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector = psmintr=0A= =0A= # Order is important here due to intrusive probes, do *not* = alphabetize=0A= # this list of network interfaces until the probes have been fixed.=0A= # Right now it appears that the ie0 must be probed before ep0. See=0A= # revision 1.20 of this file.=0A= device de0=0A= device fxp0=0A= device tx0=0A= device vx0=0A= =0A= #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector = edintr=0A= #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector = ieintr=0A= #device ep0 at isa? port 0x300 net irq 10 vector epintr=0A= #device ex0 at isa? port? net irq? vector exintr=0A= #device fe0 at isa? port 0x300 net irq ? vector feintr=0A= #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector = le_intr=0A= #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr=0A= #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr=0A= #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector = zpintr=0A= #device cs0 at isa? disable port 0x300 net irq ? vector csintr=0A= =0A= pseudo-device loop=0A= pseudo-device ether=0A= pseudo-device log=0A= pseudo-device sl 1=0A= pseudo-device ppp 1=0A= pseudo-device vn 1=0A= pseudo-device tun 1=0A= pseudo-device pty 16=0A= pseudo-device gzip # Exec gzipped a.out's=0A= =0A= # KTRACE enables the system-call tracing facility ktrace(2).=0A= # This adds 4 KB bloat to your kernel, and slightly increases=0A= # the costs of each syscall.=0A= options KTRACE #kernel tracing=0A= =0A= # This provides support for System V shared memory.=0A= #=0A= options SYSVSHM=0A= ------_=_NextPart_000_01BDE744.39417368-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C3EE7883164FD211AFAF00A0C978C7528EA0>