Date: Thu, 10 Jun 2004 12:48:35 -0600 From: "Chad Leigh -- Shire.Net LLC" <chad@shire.net> To: freebsd-current@freebsd.org Subject: Re: SiI 3114 SATA support (plain disk mode) Message-ID: <C785347E-BB0E-11D8-B999-003065A70D30@shire.net> In-Reply-To: <30827.1084343615@critter.freebsd.dk> References: <30827.1084343615@critter.freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On May 12, 2004, at 12:33 AM, Poul-Henning Kamp wrote: > In message <FFA2CCA5-A3DD-11D8-A0B4-003065A70D30@shire.net>, "Chad > Leigh -- Shi > re.Net LLC" writes: >> Hi >> >> I realize that the ATA/SATA support is evolving and ongoing. I just >> wanted to know what the current level of support is for the SiI 3114 >> SATA controller in -CURRENT. I want to use it with plain old disks, >> not in any raid mode. >> >> I have a Tyan S2882 dual Opteron board running FreeBSD 5.2-CURRENT >> (updated May 11) running i386 version. > > With the last commit from sos@ (yesterday I think) the Sil3114 works > on my S2882. > Hi All Ok, I finally got around to upgrading to the latest -CURRENT around 7am UTC June 10. I re-enabled the SiL 3114 in plain disk mode in the mb bios and booted. There is one disk plugged into the mb SATA ports and 2 still plugged in to the Promise controller I have been using. (I also tried it with all 3 plugged into the mb). On boot with the latest -CURRENT, the system no longer crashes. However, even though the BIOS lists the disks correctly on POST, FreeBSD shows no SATA disks. (I boot off a SCSI RAID array on an Adaptec 2200S). Have others a working system with the SiL 2882 dual opteron boards running i386 -CURRENT? Thanks Chad
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C785347E-BB0E-11D8-B999-003065A70D30>