Date: Mon, 8 Sep 2014 14:41:46 +0400 From: nick gigashvili <nickagigashvili@gmail.com> To: freebsd-acpi@freebsd.org Subject: Re: freebsd-acpi Digest, Vol 456, Issue 2 Message-ID: <CA%2Bxi39ZcFGXBw%2BMkidh%2BA62GmG%2BFfDQcROSpAxvVk82dX7=Rog@mail.gmail.com> In-Reply-To: <mailman.58.1410004802.95725.freebsd-acpi@freebsd.org> References: <mailman.58.1410004802.95725.freebsd-acpi@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Ian for response Ill do as you suggested... what about ASL syntax error shouldn't I pay attantion to it ? On Sat, Sep 6, 2014 at 4:00 PM, <freebsd-acpi-request@freebsd.org> wrote: > Send freebsd-acpi mailing list submissions to > freebsd-acpi@freebsd.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > or, via email, send a message with subject or body 'help' to > freebsd-acpi-request@freebsd.org > > You can reach the person managing the list at > freebsd-acpi-owner@freebsd.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of freebsd-acpi digest..." > > > Today's Topics: > > 1. Problems with acpi (battery status not shown) (nick gigashvili) > 2. Re: Problems with acpi (battery status not shown) (Ian Smith) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 5 Sep 2014 18:43:23 +0400 > From: nick gigashvili <nickagigashvili@gmail.com> > To: freebsd-acpi@freebsd.org > Subject: Problems with acpi (battery status not shown) > Message-ID: > <CA+xi39bJhho+U9UPuiuxbzqsFcWHw8ZjRT5w0tTDufEaKFF1= > w@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi > > I'm having problem with acpi battery status is not updated it is freezed on > 96% when on AC power, I'm running FreeBSD 10-RELEASE on HP Workstation > 8570w. > I tested ASL with iasl and it has syntax error. I coultn't boot with acpi > turned off so Im sending you dmesg output only with acpi enabled. > > here is ASL file link: > https://www.sendspace.com/file/do5xn7 > > Thank you > -------------- next part -------------- > Table 'FACP' at 0xbeffc000 > Table 'HPET' at 0xbeffb000 > Table 'APIC' at 0xbeffa000 > APIC: Found table at 0xbeffa000 > APIC: Using the MADT enumerator. > MADT: Found CPU APIC ID 0 ACPI ID 0: enabled > SMP: Added CPU 0 (AP) > MADT: Found CPU APIC ID 1 ACPI ID 1: enabled > SMP: Added CPU 1 (AP) > MADT: Found CPU APIC ID 2 ACPI ID 2: enabled > SMP: Added CPU 2 (AP) > MADT: Found CPU APIC ID 3 ACPI ID 3: enabled > SMP: Added CPU 3 (AP) > MADT: Found CPU APIC ID 4 ACPI ID 4: enabled > SMP: Added CPU 4 (AP) > MADT: Found CPU APIC ID 5 ACPI ID 5: enabled > SMP: Added CPU 5 (AP) > MADT: Found CPU APIC ID 6 ACPI ID 6: enabled > SMP: Added CPU 6 (AP) > MADT: Found CPU APIC ID 7 ACPI ID 7: enabled > SMP: Added CPU 7 (AP) > Copyright (c) 1992-2014 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-RELEASE-p7 #0: Tue Jul 8 06:37:44 UTC 2014 > root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 > FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 > Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff817f2000. > Calibrating TSC clock ... TSC clock: 2394611688 Hz > CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a > Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB> > TSC: P-state invariant, performance statistics > real memory = 8589934592 (8192 MB) > Physical memory chunk(s): > 0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages) > 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) > 0x000000000181f000 - 0x00000000bd8fefff, 3155034112 bytes (770272 pages) > 0x00000000bec7f000 - 0x00000000bef71fff, 3092480 bytes (755 pages) > 0x00000000befff000 - 0x00000000beffffff, 4096 bytes (1 pages) > 0x0000000100000000 - 0x000000022f5e8fff, 5089693696 bytes (1242601 pages) > avail memory = 8195903488 (7816 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <HPQOEM 176B > > INTR: Adding local APIC 1 as a target > INTR: Adding local APIC 2 as a target > INTR: Adding local APIC 3 as a target > INTR: Adding local APIC 4 as a target > INTR: Adding local APIC 5 as a target > INTR: Adding local APIC 6 as a target > INTR: Adding local APIC 7 as a target > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > APIC: CPU 0 has ACPI ID 0 > APIC: CPU 1 has ACPI ID 1 > APIC: CPU 2 has ACPI ID 2 > APIC: CPU 3 has ACPI ID 3 > APIC: CPU 4 has ACPI ID 4 > APIC: CPU 5 has ACPI ID 5 > APIC: CPU 6 has ACPI ID 6 > APIC: CPU 7 has ACPI ID 7 > lapic0: CMCI unmasked > x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 > x86bios: SSEG 0x098000-0x098fff at 0xfffffe01ebf9f000 > x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000 > x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 > XEN: CPU 0 has VCPU ID 0 > XEN: CPU 1 has VCPU ID 1 > XEN: CPU 2 has VCPU ID 2 > XEN: CPU 3 has VCPU ID 3 > XEN: CPU 4 has VCPU ID 4 > XEN: CPU 5 has VCPU ID 5 > XEN: CPU 6 has VCPU ID 6 > XEN: CPU 7 has VCPU ID 7 > ULE: setup cpu 0 > ULE: setup cpu 1 > ULE: setup cpu 2 > ULE: setup cpu 3 > ULE: setup cpu 4 > ULE: setup cpu 5 > ULE: setup cpu 6 > ULE: setup cpu 7 > ACPI: RSDP 0xf2f10 00024 (v02 HPQOEM) > ACPI: XSDT 0xbeffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) > ACPI: FACP 0xbeffc000 0010C (v05 HPQOEM 176B 0000000F HP 00000001) > ACPI: DSDT 0xbefd6000 20720 (v02 HPQOEM 176B 00000001 INTL 20110112) > ACPI: FACS 0xbec34000 00040 > ACPI: HPET 0xbeffb000 00038 (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: APIC 0xbeffa000 000BC (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: MCFG 0xbeff9000 0003C (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: TCPA 0xbeff7000 00032 (v02 HPQOEM 176B 00000000 HP 00000001) > ACPI: SSDT 0xbefd3000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) > ACPI: SSDT 0xbefd2000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) > ACPI: SLIC 0xbefd1000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) > ACPI: FPDT 0xbefcf000 00044 (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: BGRT 0xbefce000 00038 (v00 HPQOEM 176B 00000001 HP 00000001) > ACPI: SSDT 0xbefcd000 00E42 (v01 HPQOEM ATIGFX 00000001 INTL 20110112) > ACPI: SSDT 0xbefca000 00932 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) > ACPI: SSDT 0xbefc9000 00AAD (v01 PmRef CpuPm 00003000 INTL 20110112) > ACPI: ASF! 0xbeff8000 000A5 (v32 HPQOEM 176B 00000001 HP 00000001) > MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > MADT: Interrupt override: source 9, irq 9 > ioapic0: intpin 9 trigger: level > lapic0: Routing NMI -> LINT1 > lapic0: LINT1 trigger: edge > lapic0: LINT1 polarity: high > lapic1: Routing NMI -> LINT1 > lapic1: LINT1 trigger: edge > lapic1: LINT1 polarity: high > lapic2: Routing NMI -> LINT1 > lapic2: LINT1 trigger: edge > lapic2: LINT1 polarity: high > lapic3: Routing NMI -> LINT1 > lapic3: LINT1 trigger: edge > lapic3: LINT1 polarity: high > lapic4: Routing NMI -> LINT1 > lapic4: LINT1 trigger: edge > lapic4: LINT1 polarity: high > lapic5: Routing NMI -> LINT1 > lapic5: LINT1 trigger: edge > lapic5: LINT1 polarity: high > lapic6: Routing NMI -> LINT1 > lapic6: LINT1 trigger: edge > lapic6: LINT1 polarity: high > lapic7: Routing NMI -> LINT1 > lapic7: LINT1 trigger: edge > lapic7: LINT1 polarity: high > ioapic0 <Version 2.0> irqs 0-23 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > wlan: <802.11 Link Layer> > snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] > feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 > feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 > Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present > kbd: new array size 4 > kbd1 at kbdmux0 > mem: <memory> > null: <null device, zero device> > nfslock: pseudo-device > Falling back to <Software, Yarrow> random adaptor > random: <Software, Yarrow> initialized > VESA: INT 0x10 vector 0xc000:0x039e > VESA: information block > 0000 56 45 53 41 00 03 44 02 00 c0 01 00 00 00 44 00 > 0010 00 99 00 01 18 0f 59 01 00 c0 e4 00 00 c0 e0 56 > 0020 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0040 00 00 00 00 00 01 01 01 03 01 05 01 07 01 10 01 > 0050 11 01 13 01 14 01 16 01 17 01 19 01 1a 01 0d 01 > 0060 0e 01 20 01 93 01 95 01 96 01 b3 01 b5 01 b6 01 > 0070 c3 01 c5 01 c6 01 33 01 35 01 36 01 53 01 55 01 > 0080 56 01 63 01 65 01 66 01 21 01 22 01 23 01 24 01 > 0090 43 01 45 01 46 01 73 01 75 01 76 01 83 01 85 01 > 00a0 86 01 d3 01 d5 01 d6 01 e3 01 e5 01 e6 01 d1 01 > 00b0 d2 01 d4 01 ff ff 00 00 00 00 00 00 00 00 00 00 > 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0130 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 > 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0150 00 00 00 00 80 81 01 00 00 00 00 00 00 00 00 00 > 0160 00 00 00 00 a8 06 00 00 00 00 00 00 08 00 00 00 > 0170 00 00 00 00 cc 5b 09 54 00 00 00 00 e1 ef 02 54 > 0180 00 00 00 00 e1 ef 02 54 00 00 00 00 e1 ef 02 54 > 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01a0 00 00 00 00 20 e0 c6 7a 00 00 00 00 00 00 00 00 > 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01c0 00 00 00 00 46 6f 38 00 00 00 00 00 00 00 00 00 > 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > VESA: 56 mode(s) found > VESA: v3.0, 16384k memory, flags:0x1, mode table:0xfffffe01ebfff044 > (99000044) > VESA: AMD ATOMBIOS > VESA: (C) 1988-2010, Advanced Micro Devices, Inc. FGL CHELSEA 01.00 > io: <I/O> > VMBUS: load > hptnr: R750/DC7280 controller driver v1.0 > hpt27xx: RocketRAID 27xx controller driver v1.1 > hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 > acpi0: <HPQOEM SLIC-MPC> on motherboard > ACPI: All ACPI Tables successfully acquired > PCIe: Memory Mapped configuration base @ 0xe0000000 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 > acpi0: Power Button (fixed) > cpu0: Processor \134_PR_.CPU0 (ACPI ID 0) -> APIC ID 0 > cpu0: <ACPI CPU> on acpi0 > ACPI: SSDT 0xbec32018 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) > ACPI: Dynamic OEM Table Load: > ACPI: SSDT 0 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) > cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1 > cpu1: <ACPI CPU> on acpi0 > ACPI: SSDT 0xbec33a98 00303 (v01 PmRef ApIst 00003000 INTL 20110112) > ACPI: Dynamic OEM Table Load: > ACPI: SSDT 0 00303 (v01 PmRef ApIst 00003000 INTL 20110112) > ACPI: SSDT 0xbec31d98 00119 (v01 PmRef ApCst 00003000 INTL 20110112) > ACPI: Dynamic OEM Table Load: > ACPI: SSDT 0 00119 (v01 PmRef ApCst 00003000 INTL 20110112) > cpu2: Processor \134_PR_.CPU2 (ACPI ID 2) -> APIC ID 2 > cpu2: <ACPI CPU> on acpi0 > cpu3: Processor \134_PR_.CPU3 (ACPI ID 3) -> APIC ID 3 > cpu3: <ACPI CPU> on acpi0 > cpu4: Processor \134_PR_.CPU4 (ACPI ID 4) -> APIC ID 4 > cpu4: <ACPI CPU> on acpi0 > cpu5: Processor \134_PR_.CPU5 (ACPI ID 5) -> APIC ID 5 > cpu5: <ACPI CPU> on acpi0 > cpu6: Processor \134_PR_.CPU6 (ACPI ID 6) -> APIC ID 6 > cpu6: <ACPI CPU> on acpi0 > cpu7: Processor \134_PR_.CPU7 (ACPI ID 7) -> APIC ID 7 > cpu7: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route > hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic > hpet0: t1: irqs 0x00f00000 (0), MSI > hpet0: t2: irqs 0x00f00800 (0), MSI > hpet0: t3: irqs 0x00f01000 (0), MSI > hpet0: t4: irqs 0x00000000 (0), MSI > hpet0: t5: irqs 0x00000000 (0), MSI > hpet0: t6: irqs 0x00000000 (0), MSI > hpet0: t7: irqs 0x00000000 (0), MSI > Timecounter "HPET" frequency 14318180 Hz quality 950 > msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 > msi: routing MSI-X IRQ 257 to local APIC 0 vector 50 > msi: routing MSI-X IRQ 258 to local APIC 0 vector 51 > msi: routing MSI-X IRQ 259 to local APIC 0 vector 52 > msi: routing MSI-X IRQ 260 to local APIC 0 vector 53 > msi: routing MSI-X IRQ 261 to local APIC 0 vector 54 > msi: routing MSI-X IRQ 262 to local APIC 0 vector 55 > msi: routing MSI-X IRQ 263 to local APIC 0 vector 56 > Event timer "HPET" frequency 14318180 Hz quality 550 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > atrtc0: registered as a time-of-day clock (resolution 1000000us, > adjustment 0.500000000s) > ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58 > Event timer "i8254" frequency 1193182 Hz quality 100 > ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 5 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pcib0: decoding 4 range 0-0xcf7 > pcib0: decoding 4 range 0xd00-0xffff > pcib0: decoding 3 range 0xa0000-0xbffff > pcib0: decoding 3 range 0xc0000000-0xdfffffff > pcib0: decoding 3 range 0xf0000000-0xfedfffff > pcib0: decoding 3 range 0xfee01000-0xffffffff > pci0: <ACPI PCI bus> on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x8086, dev=0x0154, revid=0x09 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x0151, revid=0x09 > domain=0, bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.1.INTA > pcib0: slot 1 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e31, revid=0x04 > domain=0, bus=0, slot=20, func=0 > class=0c-03-30, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xd4420000, size 16, memory > disabled > pcib0: allocated type 3 (0xd4420000-0xd442ffff) for rid 10 of pci0:0:20:0 > pcib0: no PRT entry for 0.20.INTA > found-> vendor=0x8086, dev=0x1e3a, revid=0x04 > domain=0, bus=0, slot=22, func=0 > class=07-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4435000, size 4, enabled > pcib0: allocated type 3 (0xd4435000-0xd443500f) for rid 10 of pci0:0:22:0 > pcib0: matched entry for 0.22.INTA > pcib0: slot 22 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1502, revid=0x04 > domain=0, bus=0, slot=25, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 32, base 0xd4400000, size 17, enabled > pcib0: allocated type 3 (0xd4400000-0xd441ffff) for rid 10 of pci0:0:25:0 > map[14]: type Memory, range 32, base 0xd443b000, size 12, enabled > pcib0: allocated type 3 (0xd443b000-0xd443bfff) for rid 14 of pci0:0:25:0 > map[18]: type I/O Port, range 32, base 0x5040, size 5, enabled > pcib0: allocated type 4 (0x5040-0x505f) for rid 18 of pci0:0:25:0 > pcib0: matched entry for 0.25.INTA > pcib0: slot 25 INTA hardwired to IRQ 17 > found-> vendor=0x8086, dev=0x1e2d, revid=0x04 > domain=0, bus=0, slot=26, func=0 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xd443a000, size 10, enabled > pcib0: allocated type 3 (0xd443a000-0xd443a3ff) for rid 10 of pci0:0:26:0 > pcib0: matched entry for 0.26.INTA > pcib0: slot 26 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e20, revid=0x04 > domain=0, bus=0, slot=27, func=0 > class=04-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4430000, size 14, enabled > pcib0: allocated type 3 (0xd4430000-0xd4433fff) for rid 10 of pci0:0:27:0 > pcib0: matched entry for 0.27.INTA > pcib0: slot 27 INTA hardwired to IRQ 22 > found-> vendor=0x8086, dev=0x1e10, revid=0xc4 > domain=0, bus=0, slot=28, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTA > pcib0: slot 28 INTA hardwired to IRQ 17 > found-> vendor=0x8086, dev=0x1e12, revid=0xc4 > domain=0, bus=0, slot=28, func=1 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTB > pcib0: slot 28 INTB hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e14, revid=0xc4 > domain=0, bus=0, slot=28, func=2 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTC > pcib0: slot 28 INTC hardwired to IRQ 18 > found-> vendor=0x8086, dev=0x1e16, revid=0xc4 > domain=0, bus=0, slot=28, func=3 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTD > pcib0: slot 28 INTD hardwired to IRQ 19 > found-> vendor=0x8086, dev=0x1e26, revid=0x04 > domain=0, bus=0, slot=29, func=0 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xd4439000, size 10, enabled > pcib0: allocated type 3 (0xd4439000-0xd44393ff) for rid 10 of pci0:0:29:0 > pcib0: matched entry for 0.29.INTA > pcib0: slot 29 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e55, revid=0x04 > domain=0, bus=0, slot=31, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x1e03, revid=0x04 > domain=0, bus=0, slot=31, func=2 > class=01-06-01, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type I/O Port, range 32, base 0x5068, size 3, enabled > pcib0: allocated type 4 (0x5068-0x506f) for rid 10 of pci0:0:31:2 > map[14]: type I/O Port, range 32, base 0x5074, size 2, enabled > pcib0: allocated type 4 (0x5074-0x5077) for rid 14 of pci0:0:31:2 > map[18]: type I/O Port, range 32, base 0x5060, size 3, enabled > pcib0: allocated type 4 (0x5060-0x5067) for rid 18 of pci0:0:31:2 > map[1c]: type I/O Port, range 32, base 0x5070, size 2, enabled > pcib0: allocated type 4 (0x5070-0x5073) for rid 1c of pci0:0:31:2 > map[20]: type I/O Port, range 32, base 0x5020, size 5, enabled > pcib0: allocated type 4 (0x5020-0x503f) for rid 20 of pci0:0:31:2 > map[24]: type Memory, range 32, base 0xd4438000, size 11, enabled > pcib0: allocated type 3 (0xd4438000-0xd44387ff) for rid 24 of pci0:0:31:2 > pcib0: matched entry for 0.31.INTB > pcib0: slot 31 INTB hardwired to IRQ 19 > found-> vendor=0x8086, dev=0x1e22, revid=0x04 > domain=0, bus=0, slot=31, func=3 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=10 > map[10]: type Memory, range 64, base 0xd4434000, size 8, enabled > pcib0: allocated type 3 (0xd4434000-0xd44340ff) for rid 10 of pci0:0:31:3 > map[20]: type I/O Port, range 32, base 0xef80, size 5, enabled > pcib0: allocated type 4 (0xef80-0xef9f) for rid 20 of pci0:0:31:3 > pcib0: matched entry for 0.31.INTC > pcib0: slot 31 INTC hardwired to IRQ 18 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib1 > pcib0: allocated type 3 (0xd4300000-0xd43fffff) for rid 20 of pcib1 > pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 24 of pcib1 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0x4000-0x4fff > pcib1: memory decode 0xd4300000-0xd43fffff > pcib1: prefetched decode 0xc0000000-0xcfffffff > pcib1: special decode VGA > pci1: <ACPI PCI bus> on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x1002, dev=0x682d, revid=0x00 > domain=0, bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size > 28, enabled > pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 10 of > pci0:1:0:0 > map[18]: type Memory, range 64, base 0xd4300000, size 18, enabled > pcib1: allocated memory range (0xd4300000-0xd433ffff) for rid 18 of > pci0:1:0:0 > map[20]: type I/O Port, range 32, base 0x4000, size 8, enabled > pcib1: allocated I/O port range (0x4000-0x40ff) for rid 20 of pci0:1:0:0 > pcib1: matched entry for 1.0.INTA > pcib1: slot 0 INTA hardwired to IRQ 16 > found-> vendor=0x1002, dev=0xaab0, revid=0x00 > domain=0, bus=1, slot=0, func=1 > class=04-03-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4340000, size 14, enabled > pcib1: allocated memory range (0xd4340000-0xd4343fff) for rid 10 of > pci0:1:0:1 > pcib1: matched entry for 1.0.INTB > pcib1: slot 0 INTB hardwired to IRQ 17 > vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem > 0xc0000000-0xcfffffff,0xd4300000-0xd433ffff irq 16 at device 0.0 on pci1 > vgapci0: Boot video device > hdac0: <ATI (0xaab0) HDA Controller> mem 0xd4340000-0xd4343fff irq 17 at > device 0.1 on pci1 > hdac0: PCI card vendor: 0x103c, device: 0x176b > hdac0: HDA Driver Revision: 20120126_0002 > hdac0: Config options: on=0x00000000 off=0x00000000 > hdac0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 264 to local APIC 0 vector 59 > hdac0: using IRQ 264 for MSI > hdac0: hdac_get_capabilities: Invalid corb size (0) > device_attach: hdac0 attach returned 6 > xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd4420000-0xd442ffff > irq 10 at device 20.0 on pci0 > xhci0: attempting to allocate 1 MSI vectors (8 supported) > msi: routing MSI IRQ 264 to local APIC 0 vector 59 > xhci0: using IRQ 264 for MSI > xhci0: MSI enabled > xhci0: 32 byte context size. > xhci0: Port routing mask set to 0xffffffff > usbus0 on xhci0 > xhci0: usbpf: Attached > pci0: <simple comms> at device 22.0 (no driver attached) > em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x5040-0x505f mem > 0xd4400000-0xd441ffff,0xd443b000-0xd443bfff irq 17 at device 25.0 on pci0 > em0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 265 to local APIC 0 vector 60 > em0: using IRQ 265 for MSI > em0: Using an MSI interrupt > em0: bpf attached > em0: Ethernet address: fc:15:b4:06:78:e5 > ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd443a000-0xd443a3ff > irq 16 at device 26.0 on pci0 > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 61 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > ehci0: usbpf: Attached > hdac0: <Intel Panther Point HDA Controller> mem 0xd4430000-0xd4433fff irq > 22 at device 27.0 on pci0 > hdac0: PCI card vendor: 0x103c, device: 0x176b > hdac0: HDA Driver Revision: 20120126_0002 > hdac0: Config options: on=0x00000000 off=0x00000000 > hdac0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 266 to local APIC 0 vector 62 > hdac0: using IRQ 266 for MSI > hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pcib0: allocated type 3 (0xd4200000-0xd42fffff) for rid 20 of pcib2 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: memory decode 0xd4200000-0xd42fffff > pci2: <ACPI PCI bus> on pcib2 > pci2: domain=0, physical bus=2 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 > pcib0: allocated type 4 (0x2000-0x3fff) for rid 1c of pcib3 > pcib0: allocated type 3 (0xd0000000-0xd3ffffff) for rid 20 of pcib3 > pcib3: domain 0 > pcib3: secondary bus 3 > pcib3: subordinate bus 35 > pcib3: I/O decode 0x2000-0x3fff > pcib3: memory decode 0xd0000000-0xd3ffffff > pci3: <ACPI PCI bus> on pcib3 > pci3: domain=0, physical bus=3 > pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pcib0: allocated type 3 (0xd4100000-0xd41fffff) for rid 20 of pcib4 > pcib4: domain 0 > pcib4: secondary bus 36 > pcib4: subordinate bus 36 > pcib4: memory decode 0xd4100000-0xd41fffff > pci36: <ACPI PCI bus> on pcib4 > pci36: domain=0, physical bus=36 > found-> vendor=0x197b, dev=0x2380, revid=0x30 > domain=0, bus=36, slot=0, func=0 > class=0c-00-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 32, base 0xd4100000, size 11, enabled > pcib4: allocated memory range (0xd4100000-0xd41007ff) for rid 10 of > pci0:36:0:0 > map[14]: type Memory, range 32, base 0xd4105000, size 8, enabled > pcib4: allocated memory range (0xd4105000-0xd41050ff) for rid 14 of > pci0:36:0:0 > pcib4: matched entry for 36.0.INTA > pcib4: slot 0 INTA hardwired to IRQ 18 > found-> vendor=0x197b, dev=0x2392, revid=0x30 > domain=0, bus=36, slot=0, func=1 > class=08-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 32, base 0xd4104000, size 8, enabled > pcib4: allocated memory range (0xd4104000-0xd41040ff) for rid 10 of > pci0:36:0:1 > pcib4: matched entry for 36.0.INTA > pcib4: slot 0 INTA hardwired to IRQ 18 > found-> vendor=0x197b, dev=0x2391, revid=0x30 > domain=0, bus=36, slot=0, func=2 > class=08-05-01, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 32, base 0xd4103000, size 8, enabled > pcib4: allocated memory range (0xd4103000-0xd41030ff) for rid 10 of > pci0:36:0:2 > pcib4: matched entry for 36.0.INTA > pcib4: slot 0 INTA hardwired to IRQ 18 > pci36: <serial bus, FireWire> at device 0.0 (no driver attached) > pci36: <base peripheral> at device 0.1 (no driver attached) > sdhci_pci0: <Generic SD HCI> mem 0xd4103000-0xd41030ff irq 18 at device > 0.2 on pci36 > sdhci_pci0-slot0: 50MHz 4bits 3.3V 1.8V DMA > sdhci_pci0-slot0: ============== REGISTER DUMP ============== > sdhci_pci0-slot0: Sys addr: 0x00000000 | Version: 0x0000ad01 > sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 > sdhci_pci0-slot0: Present: 0x00080000 | Host ctl: 0x00000000 > sdhci_pci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000 > sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000 > sdhci_pci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb > sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 > sdhci_pci0-slot0: Caps: 0x054032b2 | Max curr: 0x00000000 > sdhci_pci0-slot0: =========================================== > sdhci_pci0: 1 slot(s) allocated > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 63 > pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 > pcib0: allocated type 3 (0xd4000000-0xd40fffff) for rid 20 of pcib5 > pcib5: domain 0 > pcib5: secondary bus 37 > pcib5: subordinate bus 37 > pcib5: memory decode 0xd4000000-0xd40fffff > pci37: <ACPI PCI bus> on pcib5 > pci37: domain=0, physical bus=37 > found-> vendor=0x8086, dev=0x0082, revid=0x34 > domain=0, bus=37, slot=0, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4000000, size 13, enabled > pcib5: allocated memory range (0xd4000000-0xd4001fff) for rid 10 of > pci0:37:0:0 > pcib5: matched entry for 37.0.INTA > pcib5: slot 0 INTA hardwired to IRQ 19 > iwn0: <Intel Centrino Advanced-N 6205> mem 0xd4000000-0xd4001fff irq 19 at > device 0.0 on pci37 > iwn0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 267 to local APIC 0 vector 64 > iwn0: using IRQ 267 for MSI > iwn0: MIMO 2T2R, MoW, address a4:4e:31:12:91:98 > iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > iwn0: 2T2R > iwn0: 11na MCS 20MHz > iwn0: MCS 0-7: 6.5Mbps - 65Mbps > iwn0: MCS 8-15: 13Mbps - 130Mbps > iwn0: 11na MCS 20MHz SGI > iwn0: MCS 0-7: 7Mbps - 72Mbps > iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps > iwn0: 11na MCS 40MHz: > iwn0: MCS 0-7: 13.5Mbps - 135Mbps > iwn0: MCS 8-15: 27Mbps - 270Mbps > iwn0: 11na MCS 40MHz SGI: > iwn0: MCS 0-7: 15Mbps - 150Mbps > iwn0: MCS 8-15: 30Mbps - 300Mbps > iwn0: 11ng MCS 20MHz > iwn0: MCS 0-7: 6.5Mbps - 65Mbps > iwn0: MCS 8-15: 13Mbps - 130Mbps > iwn0: 11ng MCS 20MHz SGI > iwn0: MCS 0-7: 7Mbps - 72Mbps > iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps > iwn0: 11ng MCS 40MHz: > iwn0: MCS 0-7: 13.5Mbps - 135Mbps > iwn0: MCS 8-15: 27Mbps - 270Mbps > iwn0: 11ng MCS 40MHz SGI: > iwn0: MCS 0-7: 15Mbps - 150Mbps > iwn0: MCS 8-15: 30Mbps - 300Mbps > ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd4439000-0xd44393ff > irq 16 at device 29.0 on pci0 > usbus2: EHCI version 1.0 > usbus2 on ehci1 > ehci1: usbpf: Attached > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel Panther Point AHCI SATA controller> port > 0x5068-0x506f,0x5074-0x5077,0x5060-0x5067,0x5070-0x5073,0x5020-0x503f mem > 0xd4438000-0xd44387ff irq 19 at device 31.2 on pci0 > ahci0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 268 to local APIC 0 vector 65 > ahci0: using IRQ 268 for MSI > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > ahci0: Caps: 64bit NCQ SS ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA > 6ports > ahci0: Caps2: APST > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich0: Caps: > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich1: Caps: > ahcich2: not probed (disabled) > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich3: Caps: ESP > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich4: Caps: ESP > ahcich5: <AHCI channel> at channel 5 on ahci0 > ahcich5: Caps: ESP > ahciem0: <AHCI enclosure management bridge> on ahci0 > ahciem0: Caps: ALHD XMT SMB LED > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > battery0: <ACPI Control Method Battery> on acpi0 > battery1: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > acpi_tz2: <Thermal Zone> on acpi0 > acpi_tz3: <Thermal Zone> on acpi0 > acpi_tz4: <Thermal Zone> on acpi0 > acpi_tz5: <Thermal Zone> on acpi0 > acpi_tz6: <Thermal Zone> on acpi0 > acpi_tz7: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 66 > atkbd0: [GIANT-LOCKED] > psm0: unable to allocate IRQ > psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 > psm0: current command byte:0047 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 67 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3-00, 3 buttons > psm0: config:00000000, flags:00000008, packet size:4 > psm0: syncmask:08, syncbits:00 > ppc1: using extended I/O port range > ppc1: SPP ECP ECP+EPP > ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77a irq 5 on acpi0 > ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc1: FIFO with 16/16/15 bytes threshold > ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 0 vector 68 > ppbus0: <Parallel port bus> on ppc1 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ACPI: Enabled 4 GPEs in block 00 to 3F > acpi0: wakeup code va 0xfffffe0235ae2000 pa 0x90000 > ahc_isa_identify 0: ioport 0xc00 alloc failed > ahc_isa_identify 1: ioport 0x1c00 alloc failed > ahc_isa_identify 2: ioport 0x2c00 alloc failed > ahc_isa_identify 3: ioport 0x3c00 alloc failed > ahc_isa_identify 4: ioport 0x4c00 alloc failed > ahc_isa_identify 5: ioport 0x5c00 alloc failed > ahc_isa_identify 6: ioport 0x6c00 alloc failed > ahc_isa_identify 7: ioport 0x7c00 alloc failed > ahc_isa_identify 8: ioport 0x8c00 alloc failed > ahc_isa_identify 9: ioport 0x9c00 alloc failed > ahc_isa_identify 10: ioport 0xac00 alloc failed > ahc_isa_identify 11: ioport 0xbc00 alloc failed > ahc_isa_identify 12: ioport 0xcc00 alloc failed > ahc_isa_identify 13: ioport 0xdc00 alloc failed > ahc_isa_identify 14: ioport 0xec00 alloc failed > ex_isa_identify() > pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 > pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 > isa_probe_children: disabling PnP devices > atkbdc: atkbdc0 already exists; skipping it > atrtc: atrtc0 already exists; skipping it > attimer: attimer0 already exists; skipping it > sc: sc0 already exists; skipping it > isa_probe_children: probing non-PnP devices > orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 > pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 > pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 > pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > ppc0: cannot reserve I/O port range > ppc0 failed to probe at irq 7 on isa0 > pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 > uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0 > pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 > uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > wbwd0 failed to probe on isa0 > isa_probe_children: probing PnP devices > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > p4tcc4: <CPU Frequency Thermal Control> on cpu4 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > p4tcc5: <CPU Frequency Thermal Control> on cpu5 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > p4tcc6: <CPU Frequency Thermal Control> on cpu6 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > p4tcc7: <CPU Frequency Thermal Control> on cpu7 > Device configuration finished. > procfs registered > lapic: Divisor 2, Frequency 49887747 Hz > Timecounters tick every 1.000 msec > vlan: initialized, using hash tables with chaining > tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536 > lo0: bpf attached > hptnr: no controller detected. > hpt27xx: no controller detected. > hptrr: no controller detected. > hdacc0: <IDT 92HD81B1X HDA CODEC> at cad 0 on hdac0 > hdaa0: <IDT 92HD81B1X Audio Function Group> at nid 1 on hdacc0 > hdaa0: Subsystem ID: 0x103c176b > hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 > hdaa0: GPIO0: disabled > hdaa0: GPIO1: disabled > hdaa0: GPIO2: disabled > hdaa0: Original pins configuration: > hdaa0: nid 0x as seq device conn jack loc color > misc > hdaa0: 10 21011030 3 0 Line-out Jack 1/8 Ext-Rear Black 0 > hdaa0: 11 0421101f 1 15 Headphones Jack 1/8 Right Black 0 > hdaa0: 12 04a11020 2 0 Mic Jack 1/8 Right Black 0 > hdaa0: 13 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 > hdaa0: 14 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: 15 2181102e 2 14 Line-in Jack 1/8 Ext-Rear Black 0 > hdaa0: 16 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: 17 d5a30140 4 0 Mic Both ATAPI 0x15 Unknown 1 > hdaa0: 31 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: 32 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: Patched pins configuration: > hdaa0: nid 0x as seq device conn jack loc color > misc > hdaa0: 10 21011030 3 0 Line-out Jack 1/8 Ext-Rear Black 0 > hdaa0: 11 0421101f 1 15 Headphones Jack 1/8 Right Black 0 > hdaa0: 12 04a11020 2 0 Mic Jack 1/8 Right Black 0 > hdaa0: 13 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 > hdaa0: 14 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 15 2181102e 2 14 Line-in Jack 1/8 Ext-Rear Black 0 > hdaa0: 16 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 17 d5a30140 4 0 Mic Both ATAPI 0x15 Unknown 1 > hdaa0: 31 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 32 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 4 associations found: > hdaa0: Association 0 (1) out: > hdaa0: Pin nid=13 seq=0 > hdaa0: Pin nid=11 seq=15 > hdaa0: Association 1 (2) in: > hdaa0: Pin nid=12 seq=0 > hdaa0: Pin nid=15 seq=14 > hdaa0: Association 2 (3) out: > hdaa0: Pin nid=10 seq=0 > hdaa0: Association 3 (4) in: > hdaa0: Pin nid=17 seq=0 > hdaa0: Tracing association 0 (1) > hdaa0: Pin 13 traced to DAC 19 > hdaa0: Pin 11 traced to DAC 19 and hpredir 0 > hdaa0: Association 0 (1) trace succeeded > hdaa0: Tracing association 1 (2) > hdaa0: Pin 12 traced to ADC 21 > hdaa0: Pin 15 traced to ADC 21 > hdaa0: Association 1 (2) trace succeeded > hdaa0: Tracing association 2 (3) > hdaa0: Pin 10 traced to DAC 20 > hdaa0: Association 2 (3) trace succeeded > hdaa0: Tracing association 3 (4) > hdaa0: Pin 17 traced to ADC 22 > hdaa0: Association 3 (4) trace succeeded > hdaa0: Looking for additional DAC for association 0 (1) > hdaa0: Looking for additional ADC for association 1 (2) > hdaa0: Looking for additional DAC for association 2 (3) > hdaa0: Looking for additional ADC for association 3 (4) > hdaa0: Tracing input monitor > hdaa0: Tracing nid 27 to out > hdaa0: nid 27 is input monitor > hdaa0: Tracing other input monitors > hdaa0: Tracing nid 12 to out > hdaa0: Tracing nid 15 to out > hdaa0: Tracing nid 17 to out > hdaa0: Tracing beeper > hdaa0: Headphones redirection for association 0 nid=11 using unsolicited > responses. > hdaa0: Redirect output to: main > hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref > pcm0: <IDT 92HD81B1X (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa0 > pcm0: Playback: > pcm0: Stream cap: 0x00000001 PCM > pcm0: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm0: DAC: 19 > pcm0: > pcm0: nid=13 [pin: Speaker (Fixed)] > pcm0: + <- nid=19 [audio output] [src: pcm] > pcm0: > pcm0: nid=11 [pin: Headphones (Black Jack)] > pcm0: + <- nid=19 [audio output] [src: pcm] > pcm0: > pcm0: Record: > pcm0: Stream cap: 0x00000001 PCM > pcm0: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm0: ADC: 21 > pcm0: > pcm0: nid=21 [audio input] > pcm0: + <- nid=23 [audio selector] [src: line, mic, mix] > pcm0: + <- nid=12 [pin: Mic (Black Jack)] [src: mic] > pcm0: + <- nid=15 [pin: Line-in (Black Jack)] [src: line] > pcm0: + <- nid=27 [audio mixer] [src: mix] > pcm0: > pcm0: Input Mix: > pcm0: > pcm0: nid=27 [audio mixer] > pcm0: + <- nid=12 [pin: Mic (Black Jack)] [src: mic] > pcm0: + <- nid=15 [pin: Line-in (Black Jack)] [src: line] > pcm0: > pcm0: Master Volume (OSS: vol): -95/0dB > pcm0: +- ctl 7 (nid 19 out): -95/0dB (128 steps) + mute > pcm0: > pcm0: PCM Volume (OSS: pcm): -95/0dB > pcm0: +- ctl 7 (nid 19 out): -95/0dB (128 steps) + mute > pcm0: > pcm0: Microphone Volume (OSS: mic): 0/30dB > pcm0: +- ctl 2 (nid 12 out): 0/30dB (4 steps) > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: +- ctl 11 (nid 27 in 0): -34/12dB (32 steps) + mute > pcm0: > pcm0: Line-in Volume (OSS: line): 0/30dB > pcm0: +- ctl 4 (nid 15 out): 0/30dB (4 steps) > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: +- ctl 13 (nid 27 in 2): -34/12dB (32 steps) + mute > pcm0: > pcm0: Speaker/Beep Volume (OSS: speaker): -18/0dB > pcm0: +- ctl 20 (nid 33 out): -18/0dB (4 steps) + mute > pcm0: > pcm0: Recording Level (OSS: rec): 0/22dB > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: +- ctl 11 (nid 27 in 0): -34/12dB (32 steps) + mute > pcm0: +- ctl 13 (nid 27 in 2): -34/12dB (32 steps) + mute > pcm0: > pcm0: Input Mix Level (OSS: mix): 0/22dB > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: > pcm0: Mixer "vol": > pcm0: Mixer "pcm": > pcm0: Mixer "speaker": > pcm0: Mixer "line": > pcm0: Mixer "mic": > pcm0: Mixer "mix": > pcm0: Mixer "rec": > pcm0: Mixer "ogain": > pcm0: Playback channel set is: Front Left, Front Right, > pcm0: Playback channel matrix is: 2.0 (unknown) > pcm0: Recording channel set is: Front Left, Front Right, > pcm0: Recording channel matrix is: 2.0 (disconnected) > pcm1: <IDT 92HD81B1X (Analog)> at nid 10 and 17 on hdaa0 > pcm1: Playback: > pcm1: Stream cap: 0x00000001 PCM > pcm1: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm1: DAC: 20 > pcm1: > pcm1: nid=10 [pin: Line-out (Black Jack)] > pcm1: + <- nid=20 [audio output] [src: pcm] > pcm1: > pcm1: Record: > pcm1: Stream cap: 0x00000001 PCM > pcm1: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm1: ADC: 22 > pcm1: > pcm1: nid=22 [audio input] > pcm1: + <- nid=24 [audio selector] [src: monitor] > pcm1: + <- nid=17 [pin: Mic (Both)] [src: monitor] > pcm1: > pcm1: Master Volume (OSS: vol): -95/0dB > pcm1: +- ctl 8 (nid 20 out): -95/0dB (128 steps) + mute > pcm1: > pcm1: PCM Volume (OSS: pcm): -95/0dB > pcm1: +- ctl 8 (nid 20 out): -95/0dB (128 steps) + mute > pcm1: > pcm1: Microphone2 Volume (OSS: monitor): 0/30dB > pcm1: +- ctl 5 (nid 17 out): 0/30dB (4 steps) > pcm1: +- ctl 10 (nid 24 out): 0/22dB (16 steps) + mute > pcm1: > pcm1: Recording Level (OSS: rec): 0/22dB > pcm1: +- ctl 5 (nid 17 out): 0/30dB (4 steps) > pcm1: +- ctl 10 (nid 24 out): 0/22dB (16 steps) + mute > pcm1: > pcm1: Mixer "vol": > pcm1: Mixer "pcm": > pcm1: Mixer "rec": > pcm1: Mixer "ogain": > pcm1: Mixer "monitor": > pcm1: Playback channel set is: Front Left, Front Right, > pcm1: Playback channel matrix is: 2.0 (disconnected) > pcm1: Automatically set rec source to: monitor > pcm1: Recording channel set is: Front Left, Front Right, > pcm1: Recording channel matrix is: 2.0 (unknown) > random: unblocking device. > usbus0: 5.0Gbps Super Speed USB v3.0 > usbus1: 480Mbps High Speed USB v2.0 > usbus2: 480Mbps High Speed USB v2.0 > ahcich0: AHCI reset... > ahcich0: SATA connect time=1000us status=00000123 > ahcich0: AHCI reset: device found > ahcich1: AHCI reset... > ahcich1: SATA connect time=1800us status=00000113 > ahcich1: AHCI reset: device found > ahcich1: AHCI reset: device ready after 0ms > ahcich3: AHCI reset... > ugen1.1: <Intel> at usbus1 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > ugen0.1: <0x8086> at usbus0 > uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > ahcich3: SATA connect timeout time=10000us status=00000000 > ahcich3: AHCI reset: device not found > ahcich4: AHCI reset... > ahcich4: SATA connect timeout time=10000us status=00000000 > ahcich4: AHCI reset: device not found > ahcich5: AHCI reset... > ahcich5: SATA connect timeout time=10000us status=00000000 > ahcich5: AHCI reset: device not found > battery0: battery initialization start > battery1: battery initialization start > acpi_acad0: acline initialization start > acpi_acad0: On Line > acpi_acad0: acline initialization done, tried 1 times > ahcich0: AHCI reset: device ready after 100ms > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <HGST HTS725050A7E630 GH2OA440> ATA-9 SATA 2.x device > ada0: Serial Number TF0500Y91YESKL > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > GEOM: new disk ada0 > GEOM: new disk cd0 > ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 > ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device > ses0: SEMB SES Device > pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 > pass0: <HGST HTS725050A7E630 GH2OA440> ATA-9 SATA 2.x device > pass0: Serial Number TF0500Y91YESKL > pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ses0: Generation Code 0x0 has 1 SubEnclosures > ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, > offset 8 > ses0: WWN: 0 > ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0: > pass0: Command Queueing enabled > pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 > pass1: <hp CDDVDW SN-208DB HH01> Removable CD-ROM SCSI-0 device > pass1: Serial Number R8Y66GOCC00JQQ > pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO > 8192bytes) > pass2 at ahciem0 bus 0 scbus5 target 0 lun 0 > pass2: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device > cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 > cd0: <hp CDDVDW SN-208DB HH01> Removable CD-ROM SCSI-0 device > cd0: Serial Number R8Y66GOCC00JQQ > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present - > tray closed > battery0: battery initialization done, tried 1 times > Netvsc initializing... lapic7: CMCI unmasked > lapic6: CMCI unmasked > lapic3: CMCI unmasked > lapic2: CMCI unmasked > lapic4: CMCI unmasked > lapic5: CMCI unmasked > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000100f2 > SMP: AP CPU #3 Launched! > cpu3 AP: > ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #4 Launched! > cpu4 AP: > ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #6 Launched! > cpu6 AP: > ID: 0x06000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #2 Launched! > cpu2 AP: > ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #7 Launched! > cpu7 AP: > ID: 0x07000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #5 Launched! > cpu5 AP: > ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 > ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 2 vector 48 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 4 vector 48 > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 5 vector 48 > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 48 > msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 49 > msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 49 > msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 49 > msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 49 > msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 49 > msi: Assigning MSI-X IRQ 262 to local APIC 6 vector 49 > msi: Assigning MSI-X IRQ 263 to local APIC 7 vector 48 > msi: Assigning MSI IRQ 264 to local APIC 7 vector 49 > msi: Assigning MSI IRQ 266 to local APIC 1 vector 50 > msi: Assigning MSI IRQ 267 to local APIC 2 vector 50 > msi: Assigning MSI IRQ 268 to local APIC 3 vector 50 > SMP: passed TSC synchronization test > TSC timecounter discards lower 1 bit(s) > Timecounter "TSC-low" frequency 1197305844 Hz quality 1000 > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 3 is not aligned on 4096 bytes > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 2 is not aligned on 4096 bytes > GEOM_PART: partition 4 is not aligned on 4096 bytes > GEOM_PART: partition 5 is not aligned on 4096 bytes > GEOM_PART: partition 6 is not aligned on 4096 bytes > GEOM_PART: partition 7 is not aligned on 4096 bytes > uhub1: 8 ports with 8 removable, self powered > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 3 is not aligned on 4096 bytes > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 2 is not aligned on 4096 bytes > GEOM_PART: partition 4 is not aligned on 4096 bytes > GEOM_PART: partition 5 is not aligned on 4096 bytes > GEOM_PART: partition 6 is not aligned on 4096 bytes > GEOM_PART: partition 7 is not aligned on 4096 bytes > Root mount waiting for: usbus2 usbus1 > uhub2: 3 ports with 3 removable, self powered > uhub0: 3 ports with 3 removable, self powered > Root mount waiting for: usbus2 usbus1 > ugen1.2: <vendor 0x8087> at usbus1 > uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on > usbus1 > ugen2.2: <vendor 0x8087> at usbus2 > uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on > usbus2 > Root mount waiting for: usbus2 usbus1 > uhub3: 6 ports with 6 removable, self powered > uhub4: 8 ports with 8 removable, self powered > Root mount waiting for: usbus2 usbus1 > ugen1.3: <vendor 0x138a> at usbus1 > ugen2.3: <Broadcom Corp> at usbus2 > ugen1.4: <Chicony Electronics Co., Ltd.> at usbus1 > Trying to mount root from ufs:/dev/ada0s1a [rw]... > start_init: trying /sbin/init > em0: Link is up 100 Mbps Full Duplex > ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 3> on usbus2 > WARNING: attempt to domain_add(bluetooth) after domainfinalize() > WARNING: attempt to domain_add(netgraph) after domainfinalize() > battery1: battery initialization failed, giving up > -------------- next part -------------- > hw.acpi.supported_sleep_state: S3 S4 S5 > hw.acpi.power_button_state: S5 > hw.acpi.sleep_button_state: S3 > hw.acpi.lid_switch_state: NONE > hw.acpi.standby_state: NONE > hw.acpi.suspend_state: S3 > hw.acpi.sleep_delay: 1 > hw.acpi.s4bios: 0 > hw.acpi.verbose: 0 > hw.acpi.disable_on_reboot: 0 > hw.acpi.handle_reboot: 1 > hw.acpi.reset_video: 0 > hw.acpi.cpu.cx_lowest: C1 > hw.acpi.battery.life: 96 > hw.acpi.battery.time: -1 > hw.acpi.battery.state: 0 > hw.acpi.battery.units: 2 > hw.acpi.battery.info_expire: 5 > hw.acpi.acline: 1 > hw.acpi.thermal.min_runtime: 0 > hw.acpi.thermal.polling_rate: 10 > hw.acpi.thermal.user_override: 0 > hw.acpi.thermal.tz0.temperature: 57.0C > hw.acpi.thermal.tz0.active: -1 > hw.acpi.thermal.tz0.passive_cooling: 0 > hw.acpi.thermal.tz0.thermal_flags: 0 > hw.acpi.thermal.tz0._PSV: -1 > hw.acpi.thermal.tz0._HOT: 104.0C > hw.acpi.thermal.tz0._CRT: 128.0C > hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz0._TC1: -1 > hw.acpi.thermal.tz0._TC2: -1 > hw.acpi.thermal.tz0._TSP: -1 > hw.acpi.thermal.tz1.temperature: 51.0C > hw.acpi.thermal.tz1.active: -1 > hw.acpi.thermal.tz1.passive_cooling: 1 > hw.acpi.thermal.tz1.thermal_flags: 0 > hw.acpi.thermal.tz1._PSV: 108.0C > hw.acpi.thermal.tz1._HOT: -1 > hw.acpi.thermal.tz1._CRT: 128.0C > hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz1._TC1: 1 > hw.acpi.thermal.tz1._TC2: 2 > hw.acpi.thermal.tz1._TSP: 300 > hw.acpi.thermal.tz2.temperature: 47.0C > hw.acpi.thermal.tz2.active: -1 > hw.acpi.thermal.tz2.passive_cooling: 0 > hw.acpi.thermal.tz2.thermal_flags: 0 > hw.acpi.thermal.tz2._PSV: -1 > hw.acpi.thermal.tz2._HOT: -1 > hw.acpi.thermal.tz2._CRT: 128.0C > hw.acpi.thermal.tz2._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz2._TC1: -1 > hw.acpi.thermal.tz2._TC2: -1 > hw.acpi.thermal.tz2._TSP: -1 > hw.acpi.thermal.tz3.temperature: 47.0C > hw.acpi.thermal.tz3.active: -1 > hw.acpi.thermal.tz3.passive_cooling: 0 > hw.acpi.thermal.tz3.thermal_flags: 0 > hw.acpi.thermal.tz3._PSV: -1 > hw.acpi.thermal.tz3._HOT: -1 > hw.acpi.thermal.tz3._CRT: 128.0C > hw.acpi.thermal.tz3._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz3._TC1: -1 > hw.acpi.thermal.tz3._TC2: -1 > hw.acpi.thermal.tz3._TSP: -1 > hw.acpi.thermal.tz4.temperature: 31.0C > hw.acpi.thermal.tz4.active: -1 > hw.acpi.thermal.tz4.passive_cooling: 0 > hw.acpi.thermal.tz4.thermal_flags: 0 > hw.acpi.thermal.tz4._PSV: 55.0C > hw.acpi.thermal.tz4._HOT: -1 > hw.acpi.thermal.tz4._CRT: 128.0C > hw.acpi.thermal.tz4._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz4._TC1: 50 > hw.acpi.thermal.tz4._TC2: 0 > hw.acpi.thermal.tz4._TSP: 300 > hw.acpi.thermal.tz5.temperature: 127.0C > hw.acpi.thermal.tz5.active: -1 > hw.acpi.thermal.tz5.passive_cooling: 0 > hw.acpi.thermal.tz5.thermal_flags: 0 > hw.acpi.thermal.tz5._PSV: -1 > hw.acpi.thermal.tz5._HOT: -1 > hw.acpi.thermal.tz5._CRT: 128.0C > hw.acpi.thermal.tz5._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz5._TC1: -1 > hw.acpi.thermal.tz5._TC2: -1 > hw.acpi.thermal.tz5._TSP: -1 > hw.acpi.thermal.tz6.temperature: 0.0C > hw.acpi.thermal.tz6.active: -1 > hw.acpi.thermal.tz6.passive_cooling: 0 > hw.acpi.thermal.tz6.thermal_flags: 0 > hw.acpi.thermal.tz6._PSV: -1 > hw.acpi.thermal.tz6._HOT: -1 > hw.acpi.thermal.tz6._CRT: 128.0C > hw.acpi.thermal.tz6._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz6._TC1: -1 > hw.acpi.thermal.tz6._TC2: -1 > hw.acpi.thermal.tz6._TSP: -1 > hw.acpi.thermal.tz7.temperature: 0.0C > hw.acpi.thermal.tz7.active: -1 > hw.acpi.thermal.tz7.passive_cooling: 0 > hw.acpi.thermal.tz7.thermal_flags: 0 > hw.acpi.thermal.tz7._PSV: -1 > hw.acpi.thermal.tz7._HOT: -1 > hw.acpi.thermal.tz7._CRT: 128.0C > hw.acpi.thermal.tz7._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz7._TC1: -1 > hw.acpi.thermal.tz7._TC2: -1 > hw.acpi.thermal.tz7._TSP: -1 > > ------------------------------ > > Message: 2 > Date: Sat, 6 Sep 2014 02:01:41 +1000 (EST) > From: Ian Smith <smithi@nimnet.asn.au> > To: nick gigashvili <nickagigashvili@gmail.com> > Cc: freebsd-acpi@freebsd.org > Subject: Re: Problems with acpi (battery status not shown) > Message-ID: <20140906013705.Y58647@sola.nimnet.asn.au> > Content-Type: TEXT/PLAIN; CHARSET=US-ASCII > > On Fri, 5 Sep 2014 18:43:23 +0400, nick gigashvili wrote: > > Hi > > > > I'm having problem with acpi battery status is not updated it is > freezed on > > 96% when on AC power, I'm running FreeBSD 10-RELEASE on HP Workstation > > 8570w. > > I tested ASL with iasl and it has syntax error. I coultn't boot with > acpi > > turned off so Im sending you dmesg output only with acpi enabled. > > > > here is ASL file link: > > https://www.sendspace.com/file/do5xn7 > > > > Thank you > > Your hw.acpi tree and verbose dmesg look alright on a very quick browse. > No AE_* ACPI errors and battery initialisation looks good, assuming you > have just one battery fitted of the two supported. > > It's quite possible that there's no problem. Li-Ion batteries are not > trickle-charged like older technology batteries (NiCd or NiMH) but after > a full charge gradually self-discharge over days, perhaps weeks while > the laptop is powered, until the battery gets down to below around 95% > (on my Thinkpads anyway), when it will get boosted back to 100% again. > > My X200 is down to 95%; I'm expecting a charge cycle any day now :) > > State: high > Remaining capacity: 95% > Remaining time: unknown > Present rate: 0 mW > Present voltage: 12418 mV > > Try unplugging power and watching with acpiconf -i0 until down to say > 90% or lower, then reconnect power; it should charge up to 100% again, > and stay up around 98-99% for a while before gradually dropping. > > If it doesn't, try reporting the result of acpiconf -i0 at different > states and times; just the lines above will do, except for the first. > > And don't forget to let it run on battery sometimes, it's good for it; > occasional deep (or even complete) discharges help keep the battery's > internal 'coulomb counter' in good shape, and don't hurt battery life. > > cheers, Ian > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" > > ------------------------------ > > End of freebsd-acpi Digest, Vol 456, Issue 2 > ******************************************** >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2Bxi39ZcFGXBw%2BMkidh%2BA62GmG%2BFfDQcROSpAxvVk82dX7=Rog>