Date: Sun, 6 Apr 2014 18:42:34 +0200 From: Michael Tuexen <Michael.Tuexen@lurchi.franken.de> To: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> Cc: FreeBSD Net <freebsd-net@freebsd.org>, Bernd Walter <ticso@cicely7.cicely.de>, ticso@cicely.de Subject: Re: SCTP binds to IPs outside of jail Message-ID: <CA6B7EC4-B96B-4295-9F8C-3067DC2A972A@lurchi.franken.de> In-Reply-To: <77B6DEC1-D7E8-446E-A057-A692379D9EFB@lists.zabbadoz.net> References: <20140405210246.GB58138@cicely7.cicely.de> <7D1ABA78-D48D-48B7-9CE7-152BD59DB1B0@lurchi.franken.de> <77B6DEC1-D7E8-446E-A057-A692379D9EFB@lists.zabbadoz.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 06 Apr 2014, at 17:05, Bjoern A. Zeeb =
<bzeeb-lists@lists.zabbadoz.net> wrote:
>=20
> On 06 Apr 2014, at 11:42 , Michael Tuexen =
<Michael.Tuexen@lurchi.franken.de> wrote:
>=20
>> On 05 Apr 2014, at 23:02, Bernd Walter <ticso@cicely7.cicely.de> =
wrote:
>>=20
>>> So far I've tested this on FreeBSD-9.2 BETA2 r254053M only.
>>> The modifications are to allow IPv6 multicast support within jail
>>> which only makes a difference for multicast addresses and some =
multicast
>>> loopback checksum bugs - both changes are open PR.
>>>=20
>>> I've created an AF_INET6 SCTP one to many socket to receive incoming
>>> messages.
>>> The process was started within a jail.
>>> Now netstat -anW lists all host IPv6 IPs, not just those of the =
jail.
>>> Also not sure why this AF_INET6 socket is shown as sctp46.
>> This should be handled as a v6 only socket depending on your
>> setting of net.inet6.ip6.v6only sysctl variable by the SCTP stack.
>> However, netstat has no information about this and can not =
distinguish
>> between sctp6 and sctp46, so it reports sctp46 always. You can file
>> a PR about this.
>>=20
>> The questions about the addresses and the jails: The SCTP code has
>> no jail specific code. If you bind a socket to the wildcard address
>> (which is what to do by not binding at all), the SCTP stack lists
>> all addresses it know about. I'm not sure what would happen, if
>> you send a packet to an address not owned by the jail.
>> You might want to file a separate PR about the support of jails.
>=20
> Aehm, the SCTP code was filtering addresses at one point and made sure =
only jail-visible addresses were seen or bound very much like normal PCB =
handling. If this is not the case (anymore) SCTP shall not be allowed =
inside jails again.=20
Can you point me to the "normal PCB handling"? Maybe I'm just =
overlooking something...
Best regards
Michael
>=20
>=20
>=20
>=20
>>=20
>> Best regards
>> Michael
>>>=20
>>> This is the relevant C++ code part to open the socket:
>>> int
>>> setup_sctp_socket(uint16_t port)
>>> {
>>> int sc =3D socket(AF_INET6, SOCK_SEQPACKET, IPPROTO_SCTP);
>>> {
>>> // reuse address
>>> long val =3D 1;
>>> setsockopt(sc, SOL_SOCKET, SO_REUSEADDR, &val, =
sizeof(val));
>>> // XXX error handling
>>> }
>>> {
>>> // no delay
>>> long val =3D 1;
>>> setsockopt(sc, SOL_SOCKET, SCTP_NODELAY, &val, =
sizeof(val));
>>> // XXX error handling
>>> }
>>> {
>>> // eeor mode (last write needs MSG_EOR to declare end =
of message)
>>> // Linux has MSG_MORE negative send flag
>>> long val =3D 1;
>>> setsockopt(sc, SOL_SOCKET, SCTP_EXPLICIT_EOR, &val, =
sizeof(val));
>>> // XXX error handling
>>> }
>>> #if 0
>>> {
>>> struct sctp_initmsg init;
>>> bzero(&init, sizeof(init));
>>> init.sinit_num_ostreams =3D HDB_STREAMS;
>>> init.sinit_max_instreams =3D HDB_STREAMS;
>>> // SOL_SCTP instead of IPPROTO_SCTP on Linux
>>> setsockopt(sc, IPPROTO_SCTP, SCTP_INITMSG, &init, =
(socklen_t)sizeof(struct sctp_initmsg));
>>> // XXX error handling
>>> }
>>> #endif
>>> {
>>> struct sockaddr_in6 addr;
>>> bzero(&addr, sizeof(addr));
>>> addr.sin6_len =3D sizeof(addr);
>>> addr.sin6_family =3D AF_INET6;
>>> addr.sin6_port =3D htons(port);
>>> bind(sc, (struct sockaddr *)&addr, sizeof(struct =
sockaddr_in));
>>> // XXX error handling
>>> }
>>> {
>>> // enable heartbeats at 1000ms
>>> struct sctp_paddrparams paddr_params;
>>> bzero(&paddr_params, sizeof(paddr_params));
>>> paddr_params.spp_address.ss_family =3D AF_INET6;
>>> paddr_params.spp_flags =3D SPP_HB_ENABLE;
>>> paddr_params.spp_hbinterval =3D 1000;
>>> // SOL_SCTP instead of IPPROTO_SCTP on Linux
>>> setsockopt(sc, IPPROTO_SCTP, SCTP_PEER_ADDR_PARAMS, =
&paddr_params, sizeof(paddr_params));=20
>>> // XXX error handling
>>> }
>>> {
>>> struct sctp_event_subscribe events;
>>> bzero(&events, sizeof(events));
>>>=20
>>> events.sctp_data_io_event =3D 1; // we need io_events =
to know where the message came from
>>>=20
>>> // subscribe to other events as well for testing
>>> events.sctp_association_event =3D 1;
>>> events.sctp_address_event =3D 1;
>>> events.sctp_send_failure_event =3D 1;
>>> events.sctp_peer_error_event =3D 1;
>>> events.sctp_shutdown_event =3D 1;
>>> events.sctp_partial_delivery_event =3D 1;
>>> events.sctp_adaptation_layer_event =3D 1;
>>> events.sctp_authentication_event =3D 1;
>>> events.sctp_sender_dry_event =3D 1;
>>> events.sctp_stream_reset_event =3D 1;
>>>=20
>>> setsockopt(sc, IPPROTO_SCTP, SCTP_EVENTS, &events, =
sizeof(events));
>>> // XXX error handling
>>> }
>>> {
>>> // setup send and receive buffers (default on FreeBSD =
9.x)
>>> long val;
>>> val =3D 1864135;
>>> setsockopt(sc, SOL_SOCKET, SO_RCVBUF, &val, =
sizeof(val));
>>> // XXX error handling
>>> val =3D 1864135;
>>> setsockopt(sc, SOL_SOCKET, SO_SNDBUF, &val, =
sizeof(val));
>>> // XXX error handling
>>> }
>>> listen (sc, 1); // listen is required to allow incoming =
associations, but no listen queue
>>> // XXX error handling
>>>=20
>>> return sc;
>>> }
>>>=20
>>> --=20
>>> B.Walter <bernd@bwct.de> http://www.bwct.de
>>> Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner =
uvm.
>>> _______________________________________________
>>> freebsd-net@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-net
>>> To unsubscribe, send any mail to =
"freebsd-net-unsubscribe@freebsd.org"
>>>=20
>>=20
>> _______________________________________________
>> freebsd-net@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-net
>> To unsubscribe, send any mail to =
"freebsd-net-unsubscribe@freebsd.org"
>=20
> =97=20
> Bjoern A. Zeeb ????????? ??? ??????? =
??????:
> '??? ??? ???? ?????? ??????? ?? ?? ??????? ??????? ??? ????? ????? =
????
> ?????? ?? ????? ????', ????????? ?????????, "??? ????? ?? ?????", =
?.???
>=20
>=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA6B7EC4-B96B-4295-9F8C-3067DC2A972A>