Date: Wed, 22 Mar 2017 20:50:50 +0300 From: =?UTF-8?B?w5Z6a2FuIEtJUklL?= <ozkan.kirik@gmail.com> To: =?UTF-8?Q?Ermal_Lu=C3=A7i?= <eri@freebsd.org> Cc: "freebsd-net@freebsd.org" <freebsd-net@freebsd.org> Subject: Re: if_epair altq support problem Message-ID: <CAAcX-AHPVSDhKrPdPCG9b3qvGPG7HOH5d_rs4o6Fjt8_%2B5gw6g@mail.gmail.com> In-Reply-To: <CAAcX-AFcnwAMCBcaFVYBBAGJ=hV-8P8zoP%2BxPj6T9i4eX1UFEA@mail.gmail.com> References: <CAAcX-AFJ4mmFQt2k3gdsG4c8g3d-ypzSFpypQLQF_3Jdw0W3ew@mail.gmail.com> <CAPBZQG0oUHamfmvZxk8_LaPG_%2BhTbPTuvX4h7Y9osrsvcH1L3g@mail.gmail.com> <CAAcX-AFcnwAMCBcaFVYBBAGJ=hV-8P8zoP%2BxPj6T9i4eX1UFEA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Sorry, I mistested on 10.3RELENG. it works on 11 RELENG, But at 10.3RELENG it throws /usr/src/sys/modules/if_epair/../../net/if_epair.c:830:2: error: implicit declaration of function 'if_setstartfn' is invalid in C99 [-Werror,-Wimplicit-function-declaration] On Wed, Mar 22, 2017 at 8:18 PM, =C3=96zkan KIRIK <ozkan.kirik@gmail.com> w= rote: > Thank You Ermal ! > > It works perfectly, can you commit this patch to 11.0 RELENG and MFC to > 10.3 RELENG ? > > Regards > > On Wed, Mar 22, 2017 at 6:59 AM, Ermal Lu=C3=A7i <eri@freebsd.org> wrote: > >> >> >> On Tue, Mar 21, 2017 at 5:26 AM, =C3=96zkan KIRIK <ozkan.kirik@gmail.com= > >> wrote: >> >>> Hello, >>> >>> I sent this email also to freebsd-pf list. But I think that the main >>> problem is belongs to sys/net/if_epair.c. >>> >>> I'm using FreeBSD 10.3-p17 amd64. epair pseudo device is listed as >>> supperted deviced at the Man page of altq(4). >>> From man page of altq : >>> >>> *SUPPORTED DEVICES <https://www.freebsd.org/cgi/man.cgi?query=3Daltq#en= d>* >>> >>> The driver modifications described in altq(9) >>> <https://www.freebsd.org/cgi/man.cgi?query=3Daltq&sektion=3D9&ap >>> ropos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports> >>> are required to use a cer- >>> tain network card with *ALTQ*. They have been applied to th= e >>> following >>> hardware drivers: ae(4) >>> <https://www.freebsd.org/cgi/man.cgi?query=3Dae&sektion=3D4&apro >>> pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> age(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dage&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> alc(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dalc&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> ale(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dale&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> an(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dan&sektion=3D4&apro >>> pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> ath(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dath&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> aue(4) <https://www.freebsd.org/cgi/man.cgi?query=3Daue&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> axe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Daxe&sektion=3D= 4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> bce(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbce&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> bfe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbfe&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> bge(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbge&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> bxe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dbxe&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> cas(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dcas&sektion=3D4&apr >>> opos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> cxgbe(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dcxgbe&sektion=3D4= &a >>> propos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> dc(4) <https://www.freebsd.org/cgi/man.cgi?query=3Ddc&sektion=3D4&apro >>> pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> de(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dde&sektion=3D4&apro >>> pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> ed(4) <https://www.freebsd.org/cgi/man.cgi?query=3Ded&sektion=3D4&= apro >>> pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> em(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dem&sektion=3D4&apro >>> pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> ep(4) <https://www.freebsd.org/cgi/man.cgi?query=3Dep&sektion=3D4&apro >>> pos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> epair(4) <https://www.freebsd.org/cgi/man.cgi?query=3Depair&sektion=3D4= &a >>> propos=3D0&manpath=3DFreeBSD+11.0-RELEASE+and+Ports>, >>> >>> .... >>> >>> But while trying to use it the system says that it's not suppoerted. I >>> tried on FreeBSD 11 also. The output is below: >>> >>> pf.conf : >>> altq on epair0b hfsc bandwidth 1Mb queue { ftp, ssh, icmp, other } >>> queue ftp bandwidth 30% priority 0 hfsc (upperlimit 99%) >>> queue ssh bandwidth 30% priority 2 hfsc (upperlimit 99%) >>> queue icmp bandwidth 10% priority 2 hfsc (upperlimit 99%) >>> queue other bandwidth 30% priority 1 hfsc (default upperlimit 99%) >>> >>> >>> # ifconfig epair0 create >>> # ifconfig epair0a up >>> # ifconfig epair0b up >>> # pfctl -f pf.conf >>> pfctl: epair0b: driver does not support altq >>> >>> # sysctl -a | grep ALTQ >>> options ALTQ_NOPCC >>> options ALTQ_PRIQ >>> options ALTQ_CDNR >>> options ALTQ_HFSC >>> options ALTQ_RIO >>> options ALTQ_RED >>> options ALTQ_CBQ >>> options ALTQ >>> >>> >>> I have a look on /usr/src/sys/net/if_epair.c, and found the ALTQ sectio= n: >>> >>> 514 #ifdef ALTQ >>> 515 /* Support ALTQ via the clasic if_start() path. */ >>> 516 IF_LOCK(&ifp->if_snd); >>> 517 if (ALTQ_IS_ENABLED(&ifp->if_snd)) { >>> 518 ALTQ_ENQUEUE(&ifp->if_snd, m, NULL, error); >>> 519 if (error) >>> 520 ifp->if_snd.ifq_drops++; >>> 521 IF_UNLOCK(&ifp->if_snd); >>> 522 if (!error) { >>> 523 ifp->if_obytes +=3D len; >>> 524 if (mflags & (M_BCAST|M_MCAST)) >>> 525 ifp->if_omcasts++; >>> 526 >>> 527 if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) >>> =3D=3D 0) >>> 528 epair_start_locked(ifp); >>> 529 else >>> 530 (void)epair_add_ifp_for_drain >>> ing(ifp); >>> 531 } >>> 532 return (error); >>> 533 } >>> 534 IF_UNLOCK(&ifp->if_snd); >>> 535 #endif >>> >>> >> >> Just apply manually this patch to make it work. >> >> diff --git a/sys/net/if_epair.c b/sys/net/if_epair.c >> index 540f06c..04733a5 100644 >> --- a/sys/net/if_epair.c >> +++ b/sys/net/if_epair.c >> @@ -827,9 +827,11 @@ epair_clone_create(struct if_clone *ifc, char *name= , >> size_t len, caddr_t params) >> ifp->if_capabilities =3D IFCAP_VLAN_MTU; >> ifp->if_capenable =3D IFCAP_VLAN_MTU; >> ifp->if_start =3D epair_start; >> + if_setstartfn(ifp, epair_start); >> + if_setsendqlen(ifp, ifqmaxlen); >> + if_setsendqready(ifp); >> ifp->if_ioctl =3D epair_ioctl; >> ifp->if_init =3D epair_init; >> - ifp->if_snd.ifq_maxlen =3D ifqmaxlen; >> /* Assign a hopefully unique, locally administered etheraddr. */ >> eaddr[0] =3D 0x02; >> eaddr[3] =3D (ifp->if_index >> 8) & 0xff; >> @@ -852,10 +854,11 @@ epair_clone_create(struct if_clone *ifc, char >> *name, size_t len, caddr_t params) >> ifp->if_flags =3D IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; >> ifp->if_capabilities =3D IFCAP_VLAN_MTU; >> ifp->if_capenable =3D IFCAP_VLAN_MTU; >> - ifp->if_start =3D epair_start; >> + if_setstartfn(ifp, epair_start); >> + if_setsendqlen(ifp, ifqmaxlen); >> + if_setsendqready(ifp); >> ifp->if_ioctl =3D epair_ioctl; >> ifp->if_init =3D epair_init; >> - ifp->if_snd.ifq_maxlen =3D ifqmaxlen; >> /* We need to play some tricks here for the second interface. */ >> strlcpy(name, epairname, len); >> error =3D if_clone_create(name, len, (caddr_t)scb); >> >> >> >> >> >>> I have no idea that why it says that it doesn't support altq altough th= e >>> source code contains ALTQ section. >>> >>> >>> Regards >>> =C3=96zkan KIRIK >>> _______________________________________________ >>> freebsd-net@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-net >>> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >> >> >> >> >> -- >> Ermal >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAcX-AHPVSDhKrPdPCG9b3qvGPG7HOH5d_rs4o6Fjt8_%2B5gw6g>