Date: Mon, 29 Oct 2012 12:22:41 -0700 From: nate keegan <nate.keegan@gmail.com> To: Peter Jeremy <peter@rulingia.com> Cc: freebsd-hardware@freebsd.org Subject: Re: SSD dropping off bus Message-ID: <CABVjXfd3xL3dDHCUr=_v0W0nYJJ30uzOwD3bvx6pdb9wqMMwOw@mail.gmail.com> In-Reply-To: <20121029104329.GA58203@server.rulingia.com> References: <20121029104329.GA58203@server.rulingia.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I tried all sorts of things and the solution for me was to ditch Crucial SSD for straight SATA disks. http://lists.freebsd.org/pipermail/freebsd-hardware/2012-October/007135.html On Mon, Oct 29, 2012 at 3:43 AM, Peter Jeremy <peter@rulingia.com> wrote: > Several months ago, I added a OCZ Agility4 SSD to my 8.3 system. It > had been running without problem but yesterday the system reported: > > Oct 28 08:54:36 server kernel: ahcich3: Timeout on slot 25 port 0 > Oct 28 08:54:36 server kernel: ahcich3: is 00000000 cs 00000000 ss ffc1ffff rs ffc1ffff tfd 50 serr 00000800 cmd 0004b017 > Oct 28 08:57:40 server kernel: ahcich3: AHCI reset: device not ready after 31000ms (tfd = 000000d0) > Oct 28 08:57:40 server kernel: ahcich3: Timeout on slot 16 port 0 > Oct 28 08:57:40 server kernel: ahcich3: is 00000000 cs 00010000 ss 00000000 rs 00010000 tfd d0 serr 00000000 cmd 0004b017 > Oct 28 08:57:40 server kernel: ahcich3: AHCI reset: device not ready after 31000ms (tfd = 000000d0) > Oct 28 08:57:40 server kernel: ahcich3: Timeout on slot 16 port 0 > Oct 28 08:57:40 server kernel: ahcich3: is 00000000 cs 00010000 ss 00000000 rs 00010000 tfd d0 serr 00000000 cmd 0004b017 > Oct 28 08:57:40 server kernel: (ada6:ahcich3:0:0:0): lost device > Oct 28 08:57:40 server kernel: ahcich3: AHCI reset: device not ready after 31000ms (tfd = 000000d0) > Oct 28 08:57:40 server kernel: ahcich3: Timeout on slot 16 port 0 > Oct 28 08:57:40 server kernel: ahcich3: is 00000000 cs ffff07ff ss ffff07ff rs ffff07ff tfd d0 serr 00000000 cmd 0004b017 > > Power-cycling the SSD recovered it and smartctl shows no problems. > This makes me suspect it's an incompatibility between the SSD and > the SATA controller or FreeBSD driver. > > The SSD is directly connected to a ATI IXP600 (one of the onboard > ports on my Gigabyte GA-MA770-DS3) and is partitioned 3 ways: > - a mirror in my ZFS root > - ZIL for tha main data pool > - L2ARC for tha main data pool > > Has anyone else seen this behaviour? > > The SSD firmware is currently 1.4.1.3 but the latest firmware on the > OCZ site is 1.5.2 (though the release notes don't describe the > differences). Has anyone tried either firmware version? > > -- > Peter Jeremy
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABVjXfd3xL3dDHCUr=_v0W0nYJJ30uzOwD3bvx6pdb9wqMMwOw>