Date: Thu, 24 Oct 2019 19:37:48 -0400 From: Gary Otten <gdotten@gmail.com> To: freebsd-uboot@freebsd.org Subject: u-boot-a64-olinuxino difference between U-Boot SPL 2019.10 & U-Boot SPL 2019.07 Message-ID: <CABZQu%2BgR_LPMSxJoZ0XnOqXecwK=QUnd%2B-TUQC5RgM4GSNKFmA@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
The 2019.10 u-boot I compiled with with the a64-olinuxino_defconfig
configuration doesn't find the UFS partition the old one 2019.07 that is in
the ports pre-compiled does. Is there a configuration setting that I must
set before compiling? Or did I overlook something else? Is my SD card
layout appropriate, or causing the problem?
***********************************************************************************
U-Boot SPL 2019.07 (from the pre-made package) (this works)
(partial bootup txt)
Initializing modules: ZFS UFS
Load Path: /efi\boot\bootaa64.efi
Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000)
Probing 3 block devices.....* done
ZFS found no pools
UFS found 1 partition
Consoles: EFI console
FreeBSD/arm64 EFI loader, Revision 1.1
Command line arguments: loader.efi
EFI version: 2.70
EFI Firmware: Das U-Boot (rev 8217.1792)
Console: efi (0)
Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800)
Trying ESP:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
-
Loading kernel...
*******************************************************************************
U-Boot SPL 2019.10 (Compiled by myself)
(partial bootup txt)
Initializing modules: ZFS UFS
Load Path: /efi\boot\bootaa64.efi
Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000)
Probing 3 block devices...... done
ZFS found no pools
UFS found no partitions
Failed to load '/boot/loader.efi'
panic: No bootable partitions found!
## Application terminated, r = 1
EFI LOAD FAILED: continuing...
Card did not respond to voltage select!
Device 0: unknown device
ethernet@1c30000 Waiting for PHY auto negotiation to complete.........
TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
****************************************************************************************************
My SD card layout.
da2 MBR (15G)
free (993k)
1 efi (200M)
free (100M)
2 freebsd (active) (14G)
da2s2 BSD (14G)
1 freebsd-ufs (14G)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABZQu%2BgR_LPMSxJoZ0XnOqXecwK=QUnd%2B-TUQC5RgM4GSNKFmA>