Date: Sat, 18 Jun 2016 15:12:46 -0400 From: Johannes Dieterich <dieterich.joh@gmail.com> To: Hans Petter Selasky <hps@selasky.org> Cc: freebsd-current <freebsd-current@freebsd.org> Subject: Re: problem with USB disks on ALPHA3 w/ recent AMD chipset Message-ID: <CABquGzV50kfNKs7SkONtZGA2%2B7PG1y%2B-4SxX4ds-qhC03vGx3A@mail.gmail.com> In-Reply-To: <451a2bfd-63ed-9cd4-ede6-d7dae00f48d3@selasky.org> References: <CABquGzX=3igWjZvcR48bv_OeqAOhmfeCOhjAWWLF0r71xUQj4A@mail.gmail.com> <451a2bfd-63ed-9cd4-ede6-d7dae00f48d3@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jun 18, 2016 at 3:07 PM, Hans Petter Selasky <hps@selasky.org> wrote: > On 06/18/16 04:15, Johannes Dieterich wrote: >> >> Dear list, >> >> I observe the following when I try to write to any USB drive: >> >> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): INQUIRY. >> CDB: 12 00 00 00 24 00 >> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): CAM status: >> CCB request completed with an error >> Jun 17 22:02:35 manray kernel: (probe0:umass-sim0:0:0:0): Retrying command >> Jun 17 22:02:36 manray kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun >> 0 >> Jun 17 22:02:36 manray kernel: da0: <SanDisk Cruzer Blade 1.00> >> Removable Direct Access SPC-4 SCSI device >> Jun 17 22:02:36 manray kernel: da0: Serial Number 4C530001090427108375 >> Jun 17 22:02:36 manray kernel: da0: 40.000MB/s transfers >> Jun 17 22:02:36 manray kernel: da0: 15264MB (31260672 512 byte sectors) >> Jun 17 22:02:36 manray kernel: da0: quirks=0x2<NO_6_BYTE> >> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB: >> 2a 00 00 00 00 00 00 00 80 00 >> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB >> request completed with an error >> Jun 17 22:04:21 manray kernel: (da0:umass-sim0:0:0:0): Retrying command >> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB: >> 2a 00 00 00 00 00 00 00 80 00 >> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB >> request completed with an error >> Jun 17 22:04:27 manray kernel: (da0:umass-sim0:0:0:0): Retrying command >> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB: >> 2a 00 00 00 00 00 00 00 80 00 >> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB >> request completed with an error >> Jun 17 22:04:32 manray kernel: (da0:umass-sim0:0:0:0): Retrying command >> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB: >> 2a 00 00 00 00 00 00 00 80 00 >> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB >> request completed with an error >> Jun 17 22:04:38 manray kernel: (da0:umass-sim0:0:0:0): Retrying command >> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB: >> 2a 00 00 00 00 00 00 00 80 00 >> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): CAM status: CCB >> request completed with an error >> Jun 17 22:04:43 manray kernel: (da0:umass-sim0:0:0:0): Error 5, >> Retries exhausted >> Jun 17 22:05:11 manray kernel: (da0:umass-sim0:0:0:0): got CAM status 0x44 >> Jun 17 22:05:11 manray kernel: (da0:umass-sim0:0:0:0): fatal error, >> failed to attach to device >> Jun 17 22:05:11 manray kernel: da0 at umass-sim0 bus 0 scbus2 target 0 lun >> 0 >> Jun 17 22:05:11 manray kernel: da0: <SanDisk Cruzer Blade 1.00> s/n >> 4C530001090427108375 detached >> Jun 17 22:05:17 manray kernel: (da0:umass-sim0:0:0:0): Periph destroyed >> >> I.e., when I dd, the dd exists prematurely with an error. >> >> pciconf: >> >> hostb0@pci0:0:0:0: class=0x060000 card=0x15761022 chip=0x15761022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> none0@pci0:0:0:2: class=0x080600 card=0x15771022 chip=0x15771022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = base peripheral >> subclass = IOMMU >> vgapci0@pci0:0:1:0: class=0x030000 card=0x807e103c chip=0x98741002 >> rev=0xc4 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]' >> device = 'Carrizo' >> class = display >> subclass = VGA >> hdac0@pci0:0:1:1: class=0x040300 card=0x807e103c chip=0x98401002 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]' >> device = 'Kabini HDMI/DP Audio' >> class = multimedia >> subclass = HDA >> hostb1@pci0:0:2:0: class=0x060000 card=0x00000000 chip=0x157b1022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> pcib1@pci0:0:2:1: class=0x060400 card=0x12341022 chip=0x157c1022 >> rev=0x00 hdr=0x01 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = PCI-PCI >> pcib2@pci0:0:2:3: class=0x060400 card=0x12341022 chip=0x157c1022 >> rev=0x00 hdr=0x01 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = PCI-PCI >> pcib3@pci0:0:2:5: class=0x060400 card=0x12341022 chip=0x157c1022 >> rev=0x00 hdr=0x01 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = PCI-PCI >> hostb2@pci0:0:3:0: class=0x060000 card=0x00000000 chip=0x157b1022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> none1@pci0:0:8:0: class=0x108000 card=0x15781022 chip=0x15781022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = encrypt/decrypt >> hostb3@pci0:0:9:0: class=0x060000 card=0x00000000 chip=0x157d1022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> hdac1@pci0:0:9:2: class=0x040300 card=0x807e103c chip=0x157a1022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = multimedia >> subclass = HDA >> xhci0@pci0:0:16:0: class=0x0c0330 card=0x807e103c chip=0x79141022 >> rev=0x20 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> device = 'FCH USB XHCI Controller' >> class = serial bus >> subclass = USB >> ahci0@pci0:0:17:0: class=0x010601 card=0x807e103c chip=0x79011022 >> rev=0x49 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> device = 'FCH SATA Controller [AHCI mode]' >> class = mass storage >> subclass = SATA >> ehci0@pci0:0:18:0: class=0x0c0320 card=0x807e103c chip=0x79081022 >> rev=0x49 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> device = 'FCH USB EHCI Controller' >> class = serial bus >> subclass = USB >> none2@pci0:0:20:0: class=0x0c0500 card=0x807e103c chip=0x790b1022 >> rev=0x4a hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> device = 'FCH SMBus Controller' >> class = serial bus >> subclass = SMBus >> isab0@pci0:0:20:3: class=0x060100 card=0x807e103c chip=0x790e1022 >> rev=0x11 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> device = 'FCH LPC Bridge' >> class = bridge >> subclass = PCI-ISA >> hostb4@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x15701022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> hostb5@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x15711022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> hostb6@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x15721022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> hostb7@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x15731022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> hostb8@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x15741022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> hostb9@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x15751022 >> rev=0x00 hdr=0x00 >> vendor = 'Advanced Micro Devices, Inc. [AMD]' >> class = bridge >> subclass = HOST-PCI >> bge0@pci0:1:0:0: class=0x020000 card=0x807e103c chip=0x168714e4 >> rev=0x10 hdr=0x00 >> vendor = 'Broadcom Corporation' >> device = 'NetXtreme BCM5762 Gigabit Ethernet PCIe' >> class = network >> subclass = ethernet >> iwm0@pci0:2:0:0: class=0x028000 card=0x50108086 chip=0x095a8086 >> rev=0x61 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'Wireless 7265' >> class = network >> none3@pci0:3:0:0: class=0xff0000 card=0x807e103c chip=0x522a10ec >> rev=0x01 hdr=0x00 >> vendor = 'Realtek Semiconductor Co., Ltd.' >> device = 'RTS522A PCI Express Card Reader' >> >> This is on a recent CURRENT: r301970 >> >> All ideas most welcome! > > > Did you try enabling some of the UQ_MSC_XXX quirks as given by "usbconfig > dump_quirk_names"? I did not. This does happen with multiple USB sticks I have tried. Any preference which I should try?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABquGzV50kfNKs7SkONtZGA2%2B7PG1y%2B-4SxX4ds-qhC03vGx3A>