Date: Thu, 18 Feb 2016 11:57:20 -0800 From: Russell Haley <russ.haley@gmail.com> To: Tom Sparks <tom@ycombinator.com> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Hummingboard boot hangs in -HEAD Message-ID: <CABx9NuRdJxs1fN69k%2B4eSg5Ei%2BJwi=ptVzgs%2BXgZWuP61zMFRA@mail.gmail.com> In-Reply-To: <CABLy0qSyfe-j%2Bwh6OGa2Dv5EfX_SQF2xkTeX_zOV2PmawL_dyw@mail.gmail.com> References: <CABLy0qSyfe-j%2Bwh6OGa2Dv5EfX_SQF2xkTeX_zOV2PmawL_dyw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
My hummingboard booted two days ago using r294912. The image is here: ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0/FreeBSD-11.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20160127-r294912.img.xz. I was also able to buildworld and buildkernel using whatever head was at the time. I don't have it in front of me to check the revision and I have not replaced the kernel in the image with my fresh build so I can't say if it works. I'm still not able to see my m.2 ssd if anyone is listening and willing to help me. Russ On Thu, Feb 18, 2016 at 11:40 AM, Tom Sparks <tom@ycombinator.com> wrote: > I'd initially thought that it was my build that had failed so I snagged an > image from ftp.freebsd.org and no, that image fails to boot to multiuser as > well. > > > Here's where it hangs: > --- snip --- > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 480Mbps High Speed USB v2.0 > ugen1.1: <Freescale> at usbus1 > uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > ugen0.1: <Freescale> at usbus0 > uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > hdmi0: i2c transfer failed: 2 > fb0: failed to get EDID info from HDMI framer > fbd0 on fb0 > VT: initialize with new VT driver "fb". > uhub0: 1 port with 1 removable, self powered > --- snip --- > > with boot -v I get a bit further: > --- snip --- > VT: initialize with new VT driver "fb". > random: harvesting attach, 8 bytes (4 bits) from fbd0 > uhub0: 1 port with 1 removable, self powered > random: harvesting attach, 8 bytes (4 bits) from uhub0 > --- snip --- > > Then a while later, some other stuff appears: > > --- snip --- > uhub0: 1 port with 1 removable, self powered > random: harvesting attach, 8 bytes (4 bits) from uhub0 > sdhci_imx0-slot0: Divider 250 for freq 400000 (base 200000000) > mmc0: Probing bus > uhub1: 1 port with 1 removable, self powered > random: harvesting attach, 8 bytes (4 bits) from uhub1 > --- snip --- > > Supposition is that this broke in the range of r295351 through r29554. > > Anyone? > > -- > Tom Sparks > Systems Engineer > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABx9NuRdJxs1fN69k%2B4eSg5Ei%2BJwi=ptVzgs%2BXgZWuP61zMFRA>