Date: Mon, 16 Mar 2015 18:33:31 +0300 From: Konstantin Kulikov <k.kulikov2@gmail.com> To: Michael BlackHeart <amdmiek@gmail.com> Cc: freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: savecore problem Message-ID: <CAD%2BeXGRtrfx=Mw_KNTn2THxKqguKyHVn45%2BV8k3aWnQDpy2HSg@mail.gmail.com> In-Reply-To: <CA%2BAz77No%2B0k=S4xq5MPK-YEgm7HGh%2B%2BSBNRHeV0hHq7AqOc0Tw@mail.gmail.com> References: <CA%2BAz77No%2B0k=S4xq5MPK-YEgm7HGh%2B%2BSBNRHeV0hHq7AqOc0Tw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, have you tried to run savecore manually, like savecore -vvf /var/crash /dev/raid/r0p3 Also check that your dump device is working (dumpon -l) On Mon, Mar 16, 2015 at 4:40 PM, Michael BlackHeart <amdmiek@gmail.com> wrote: > Hello there. I've got a problem. Recently my personal server issued a > kernel panic. Then there's a dump and so on. But there's no dump > information after reboot. I do not know what was really the panic cause but > assume that savecore failed because of RAID. > > Problem - minidump was done (I saw it was) but was not recovered by > savecore after reboot into /var/vrash > > Filesystem is UFS > > FreeBSD diablo.miekoff.local 10.1-STABLE FreeBSD 10.1-STABLE #0 r277169: > Thu Jan 15 10:22:34 MSK 2015 > amd_miek@diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 > amd64 > > rc.conf configuration > > dumpdev="AUTO" > dumpdir="/var/crash/" > > > > RAID 1 via graid configuration (JMicron based) > > graid list > Geom name: JMicron-6e1c79e > State: OPTIMAL > Metadata: JMicron > Providers: > 1. Name: raid/r0 > Mediasize: 120024203264 (112G) > Sectorsize: 512 > Mode: r6w6e16 > Subdisks: ada0 (ACTIVE), ada1 (ACTIVE) > Dirty: No > State: OPTIMAL > Strip: 1024 > Components: 2 > Transformation: RAID1 > RAIDLevel: RAID1 > Label: SYSMIRROR > descr: JMicron RAID1 volume > Consumers: > 1. Name: ada0 > Mediasize: 120034123776 (112G) > Sectorsize: 512 > Mode: r1w1e1 > ReadErrors: 0 > Subdisks: r0(SYSMIRROR):0@0 > State: ACTIVE (ACTIVE) > 2. Name: ada1 > Mediasize: 120034123776 (112G) > Sectorsize: 512 > Mode: r1w1e1 > ReadErrors: 0 > Subdisks: r0(SYSMIRROR):1@0 > State: ACTIVE (ACTIVE) > > /etc/fstab > > # Device Mountpoint FStype Options > Dump Pass# > /dev/ufs/rootfs / ufs rw,noatime > 1 1 > /dev/raid/r0p3 none swap sw > 0 0 > /dev/ufs/varfs /var ufs rw,noatime > 2 2 > /dev/ufs/tmpfs /tmp ufs rw,noatime > 2 2 > /dev/ufs/usrfs /usr ufs rw,noatime > 2 2 > /dev/ufs/configfs /config ufs rw,noatime > 2 2 > tmpfs /usr/tmpfs tmpfs rw > 0 0 > proc /proc procfs rw > 0 0 > fdesc /dev/fd fdescfs rw > 0 0 > > In kernel configuration DEBUG -g is disabled. > > -- > amd_miek > Think different. > Just superior. > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAD%2BeXGRtrfx=Mw_KNTn2THxKqguKyHVn45%2BV8k3aWnQDpy2HSg>