Date: Mon, 16 Dec 2013 21:06:14 +0200 From: Shteryana Shopova <syrinx@FreeBSD.org> To: pyunyh@gmail.com Cc: "freebsd-net@FreeBSD.org" <freebsd-net@freebsd.org>, David Rufino <david.rufino@gmail.com> Subject: Re: RTL8111/8168B NIC & FreeBSD Message-ID: <CAExw9940J6HJv8am1JtKAWyrfQ_zV9bEKUFkF3NVQJ2aDRc_kw@mail.gmail.com> In-Reply-To: <20131216014704.GB3345@michelle.cdnetworks.com> References: <CAAwjuuzPEB%2BhT11bo6h33GsnUjcqZ5o2O1xfMkq90JwjkyB9Mg@mail.gmail.com> <CAExw994hJRh-zmCEx=Ey=T66Ppy5b76%2B-%2BiS9k3iA3R5HbcHeQ@mail.gmail.com> <20131216014704.GB3345@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hm, It's neither - re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xd1404000-0xd1404fff,0xd1400000-0xd1403fff irq 18 at device 0.1 on pci4 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x5c800000 re0: MAC rev. 0x00000000 cheers, Shteryana On Mon, Dec 16, 2013 at 3:47 AM, Yonghyeon PYUN <pyunyh@gmail.com> wrote: > On Sun, Dec 15, 2013 at 06:46:35AM +0200, Shteryana Shopova wrote: >> Hi, >> >> I hit the same problem with the same chip on FreeBSD 11.0-CURRENT #0 >> r258178 - the card would receive nothing or (perhaps not-so-)random >> crap. ifconfig down/up and disabling RX/TX check-summing makes the >> card work for me as a temporary workaround. >> > > David's controller is RTL8168G. Are you sure you have the same > controller? If your controller is RTL8168E-VL(Chip rev. > 0x2c800000 in dmesg), try the patch at the following URL. > http://people.freebsd.org/~yongari/re/re.8168evl.diff > >> re0@pci0:4:0:1: class=0x020000 card=0x07981025 chip=0x816810ec >> rev=0x14 hdr=0x00 >> vendor = 'Realtek Semiconductor Co., Ltd.' >> device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' >> class = network >> subclass = ethernet >> >> cheers, >> Shteryana >> >> >> On Sat, Dec 14, 2013 at 11:31 PM, David Rufino <david.rufino@gmail.com> wrote: >> > Hello, >> > >> > I'm having similar problems using an onboard RTL 8168B NIC. I noticed >> > there were some recent changes to the re0 driver, so I tried -STABLE >> > (r258961). The device is detected but can't send or receive packets. >> > Interestingly it doesn't work in Debian wheezy, but does work fine in >> > Windows 7 with latest drivers. I'm happy to assist in any way. Here's >> > some relevant debugging information >> > >> > pciconf -l -v >> > >> > re0@pci0:1:0:0: class=0x020000 card=0x81161019 chip=0x816810ec rev=0x0c hdr=0x00 >> > vendor = 'Realtek Semiconductor Co., Ltd.' >> > device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' >> > class = network >> > subclass = ethernet >> > >> > re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port >> > 0xe000-0xe0ff mem 0xfea00000-0xfea00fff,0xd0800000-0xd0803fff irq 32 >> > at device 0.0 on pci1 >> > re0: Using 1 MSI-X message >> > re0: ASPM disabled >> > re0: Chip rev. 0x4c000000 >> > re0: MAC rev. 0x00000000 >> > miibus0: <MII bus> on re0 >> > re0: Ethernet address: 74:27:ea:d3:de:5a >> > >> > Thanks!, >> > David >> > >> >> >> >> Hello, >> >> >> >> we are trying to install FreeBSD on a computer that uses the NIC mentioned >> >> above. The NIC is running under linux without problems, which we've tested >> >> for several days transferring several GB of data.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAExw9940J6HJv8am1JtKAWyrfQ_zV9bEKUFkF3NVQJ2aDRc_kw>