Date: Thu, 14 Nov 2013 09:42:21 -0500 From: Eitan Adler <lists@eitanadler.com> To: Hans Petter Selasky <hps@bitfrost.no> Cc: "usb@freebsd.org" <usb@freebsd.org> Subject: Re: Unable to attach USB mouse Message-ID: <CAF6rxgndwWtWEXYLmjer-7UYOGQ_TcQ3eywepETGGPjuBxsB%2Bw@mail.gmail.com> In-Reply-To: <52847654.8070501@bitfrost.no> References: <CAF6rxgn-LvNMYS8o9q9=3-O01vc92Z8A6nf3%2BMe1NvNiT8sGZA@mail.gmail.com> <52847654.8070501@bitfrost.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Nov 14, 2013 at 2:05 AM, Hans Petter Selasky <hps@bitfrost.no> wrote: > On 11/14/13 05:08, Eitan Adler wrote: >> >> The mouse driver fails to attach when plugging in my USB mouse. >> >> FreeBSD gravity.local 11.0-CURRENT FreeBSD 11.0-CURRENT #5 r257754: >> Thu Nov 7 12:12:51 EST 2013 >> root@gravity.local:/usr/obj/usr/src/sys/EADLER amd64 >> >>> From boot: >> >> [52341] ugen0.2: <Logitech> at usbus0 >> [52341] ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev >> 2.00/27.20, addr 11> on usbus0 >> [52341] ums0: 8 buttons and [XYZT] coordinates ID=0 >> [54057] ugen0.2: <Logitech> at usbus0 (disconnected) >> [54057] ums0: at uhub0, port 1, addr 11 (disconnected) >> [54058] xhci_do_command: Command timeout! >> [54058] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) > > > What USB controllers does this system have? > > --HPS > [10005 root@gravity (100%) /home/eitan ]#usbconfig ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.3: <Lenovo EasyCamera Azurewave> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) ugen1.4: <BCM20702A0 Broadcom Corp> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA) ugen1.3: <Linksys AE1000 Linksys> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (450mA) -- Eitan Adler
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAF6rxgndwWtWEXYLmjer-7UYOGQ_TcQ3eywepETGGPjuBxsB%2Bw>