Date: Sat, 5 Jan 2013 20:36:38 -0500 From: Eitan Adler <lists@eitanadler.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: regression: if_rue device doesn't attach on HEAD Message-ID: <CAF6rxgnpg9y2PSsJog3CyNxtBoE9qmvcj9DwhOOqrC340HRGoQ@mail.gmail.com> In-Reply-To: <201301042301.56493.hselasky@c2i.net> References: <CAF6rxgkhVpk=LQ9Fdz4Zzk3RcMd-HHv3s5P3LniRHkxC1chqoQ@mail.gmail.com> <201301042241.15044.hselasky@c2i.net> <CAF6rxgkabT3wc_w098RQ%2BYJwjsHSNikd6goYfNEXiCxiskaoDA@mail.gmail.com> <201301042301.56493.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 4 January 2013 17:01, Hans Petter Selasky <hselasky@c2i.net> wrote: > On Friday 04 January 2013 22:50:38 Eitan Adler wrote: >> On 4 January 2013 16:41, Hans Petter Selasky <hselasky@c2i.net> wrote: >> > This typically means set address failed, which in the XHCI is done in >> > "HW". I'll look into if I find some time. Not sure what we can do about >> > it. >> > > Hi, > >> As I mentioned - it works in 9.1 so *something* regressed. > > The only which I can think of which caused this is the recently added ETRON > patches. You can look in the xhci.c revision history and revert from the top? > There aren't that many patches made in that area. I tested in stable/9 and it is broken in stable too. This does not have the relevant patch applied I think. >> > You can try set first set config 255 and the config 0 on the parent HUB >> > of this device using usbconfig. >> >> I'm not sure what you mean here. What command should I run? > > usbconfig -d X.1 set_config 255 > usbconfig -d X.1 set_config 0 done. It did not help. -- Eitan Adler
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAF6rxgnpg9y2PSsJog3CyNxtBoE9qmvcj9DwhOOqrC340HRGoQ>