Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 9 Aug 2024 13:41:54 +0200
From:      Tomek CEDRO <tomek@cedro.info>
To:        Henrik Morsing <henrik@morsing.cc>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: MSI Radeon RX 5500 XT
Message-ID:  <CAFYkXjmJTaTxBkxXLFPk--c3Zb7a3Athjp1fw%2BHbLFvmHXhNhw@mail.gmail.com>
In-Reply-To: <ZrXhL/Ulphh%2BQfNq@morsing.cc>
References:  <ZrXhL/Ulphh%2BQfNq@morsing.cc>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Aug 9, 2024 at 11:28=E2=80=AFAM Henrik Morsing <henrik@morsing.cc> =
wrote:
> Good morning,
> I installed 13.1 last year, on a PC with a Radeon 5500 card, and had X ru=
nning fine. This setup broke and after trying to freshly install both 13.2 =
and 14.1 I cannot get graphics to work again. The system hangs hard if I tr=
y to load amdgpu or start X.
> I have installed Navi14 and DRM-515 and loaded amdgpu on boot. I can't se=
e what else I need to do and because it hangs so hard, I have no messages s=
uggesting what is wrong.

You need to rebuilld drm-510-kmod (for 13) or drm-515-kmod (for 14) by
hand from the ports (you need /usr/src installed for that). Binary
builds are done on different OS version and does not match your kernel
version - they would either wont load with error or cause kernel
panic. This is a known issue easy to fix.

I am on the 13.3 right now with hand built drm-510-kmod on RX580. Its
working rock solid. But on 14.0 with drm-515-kmod my machine was
unstable (known issue, frequent random panics due to
incompatible/missing LinuxKPI interfaces).

Someone mentioned that 14 branch can work with both drm-510-kmod and
drm-515-kmod. But I did not find that information nowhere in the
documentation before I reverted to 13 (from 14.0 with drm-515-kmod).
So if you could verify that 14.0 or 14.1 can work with 510 AND 515 drm
drivers and one of those drivers works fine for several days I could
move forward to 14 again :-)

--=20
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFYkXjmJTaTxBkxXLFPk--c3Zb7a3Athjp1fw%2BHbLFvmHXhNhw>