Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 Jan 2013 00:10:18 -0800
From:      Waitman Gobble <gobble.wa@gmail.com>
To:        freebsd-questions@freebsd.org
Subject:   FreeBSD 9.1-RELEASE w/ SanDisk ImageMate S11202
Message-ID:  <CAFuo_fzpY1vFFNV7Nww9E8ZgG=wt%2BcEK-2q6K50ystqM=JHGdw@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
Hi,

I have a PCI Express card with VIA VL800 chipset which seems to work OK
with a Seagate drive, so I presume the interface is working.

If I boot with a SanDisk ImageMate S11202 plugged into the USB 3.0 card,
the display shows messages about the SanDisk device, appears to properly
identify it, and with like 'querying ...' slots on the card reader, which
all fail - (there are no cards in the reader). Then the machine sails into
outerspace, kind of just sits there until (perhaps) the end of time, or
until I kill the power. It never gets the network interface up, so no ssh.

It would be great to be able to paste the log here but when I reboot there
is nothing about the activity in the log, it's like the entire boot process
never happened.

Anyone have any experience with this card reader? I appreciate any
suggestions or tips.

Below is pertinent system information.

Thank you,


# uname -a
FreeBSD kamira.waitman.net 9.1-RELEASE FreeBSD 9.1-RELEASE #1 r245537: Thu
Jan 17 22:10:56 PST 2013
root@kamira.waitman.net:/usr/obj/usr/src/sys/BURPLEX
amd64

kernel built with:

device        ahci        # AHCI-compatible SATA controllers
device        uhci        # UHCI PCI->USB interface
device        ohci        # OHCI PCI->USB interface
device        ehci        # EHCI PCI->USB interface (USB 2.0)
device        xhci        # XHCI PCI->USB interface (USB 3.0)

pciconf output:

xhci0@pci0:2:0:0:    class=0x0c0330 card=0x34321106 chip=0x34321106
rev=0x03 hdr=0x00
    vendor     = 'VIA Technologies, Inc.'
    class      = serial bus
    subclass   = USB

interesting log entries:

Jan 17 23:10:48 kamira kernel: usbus0: 5.0Gbps Super Speed USB v3.0

Jan 17 23:11:32 kamira kernel: ugen0.3: <Seagate> at usbus0
Jan 17 23:11:32 kamira kernel: umass1: <Seagate FA GoFlex Desk, class 0/0,
rev 3.00/1.00, addr 2> on usbus0
Jan 17 23:11:32 kamira kernel: da1 at umass-sim1 bus 1 scbus6 target 0 lun 0
Jan 17 23:11:32 kamira kernel: da1: <Seagate FA GoFlex Desk 0D0B> Fixed
Direct Access SCSI-0 device
Jan 17 23:11:32 kamira kernel: da1: 400.000MB/s transfers
Jan 17 23:11:32 kamira kernel: da1: 2861588MB (732566645 4096 byte sectors:
255H 63S/T 45600C)


-- 
Waitman Gobble
San Jose California USA
510-830-7975



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFuo_fzpY1vFFNV7Nww9E8ZgG=wt%2BcEK-2q6K50ystqM=JHGdw>