Date: Fri, 2 Sep 2011 13:41:55 +0200 From: Piotr Kubaj <freebsd.current.list@gmail.com> To: freebsd-current@freebsd.org Subject: Re: Kernel panic at boot after an upgrade from 9.0-BETA1 to 9.0-BETA2 Message-ID: <CAGUayU6WhWKLLgiVHrzbKToas2MLb406N05_B3UHvcEJ88CbpA@mail.gmail.com> In-Reply-To: <1314918373.4868.4.camel@Nokia-N900> References: <1314918373.4868.4.camel@Nokia-N900>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] 1. It's in the dump file. 2. In BEASTIE. 3. As I wrote before, 9.0-BETA1, but I had used this kernel with 8.2-RELEASE and 8.2-STABLE (only did slight modifications for 9.0). 4. I'm not really into it, what exactly do you mean? [-- Attachment #2 --] # # GENERIC -- Generic kernel configuration file for FreeBSD/amd64 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.565 2011/06/14 20:30:49 hselasky Exp $ cpu HAMMER ident BEASTIE makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device #options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_FREEBSD32 # Compatible with i386 binaries #options COMPAT_FREEBSD4 # Compatible with FreeBSD4 #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options MAC # TrustedBSD MAC Framework #options KDTRACE_FRAME # Ensure frames are compiled in #options KDTRACE_HOOKS # Kernel DTrace hooks options INCLUDE_CONFIG_FILE # Include this file in kernel # Debugging for use in -current #options KDB # Enable kernel debugger support. #options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # CPU frequency control device cpufreq # Bus support. device acpi device pci # Floppy drives #device fdc # ATA controllers device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers options ATA_CAM # Handle legacy controllers with CAM options ATA_STATIC_ID # Static device numbering #device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA #device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA # SCSI Controllers #device ahc # AHA2940 and onboard AIC7xxx devices #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #device ahd # AHA39320/29320 and onboard AIC79xx devices #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. #device amd # AMD 53C974 (Tekram DC-390(T)) #device hptiop # Highpoint RocketRaid 3xxx series #device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module #device mpt # LSI-Logic MPT-Fusion #device mps # LSI-Logic MPT-Fusion 2 #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) #device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #XXX it is not 64-bit clean, -scottl #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID# # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mfi # LSI MegaRAID SAS #device mlx # Mylex DAC960 family #XXX pointer/int warnings #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc options SC_PIXEL_MODE # add support for the raster text mode #device agp # support several AGP chipsets # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. #device bxe # Broadcom BCM57710/BCM57711/BCM57711E 10Gb Ethernet #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 Gigabit Ethernet Family #device igb # Intel PRO/1000 PCIE Server Gigabit Family #device ixgbe # Intel PRO/10GbE PCIE Ethernet Family #device le # AMD Am7900 LANCE and Am79C9xx PCnet #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device ae # Attansic/Atheros L2 FastEthernet #device age # Attansic/Atheros L1 Gigabit Ethernet #device alc # Atheros AR8131/AR8132 Ethernet device ale # Atheros AR8121/AR8113/AR8114 Ethernet #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device et # Agere ET1310 10/100/Gigabit Ethernet #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet #device lge # Level 1 LXT1001 gigabit Ethernet #device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet #device nfe # nVidia nForce MCP on-board Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') #device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sge # Silicon Integrated Systems SiS190/191 #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device stge # Sundance/Tamarack TC9021 gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # Wireless NIC cards #device wlan # 802.11 support #options IEEE80211_DEBUG # enable debug msgs #options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's #options IEEE80211_SUPPORT_MESH # enable 802.11s draft support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm #device an # Aironet 4500/4800 802.11 wireless NICs. #device ath # Atheros NIC's #device ath_pci # Atheros pci/cardbus glue #device ath_hal # pci/cardbus chip support #options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors #device ath_rate_sample # SampleRate tx rate control for ath #device bwi # Broadcom BCM430x/BCM431x wireless NICs. #device bwn # Broadcom BCM43xx wireless NICs. #device ipw # Intel 2100 wireless NICs. #device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs. #device iwn # Intel 4965/1000/5000/6000 wireless NICs. #device malo # Marvell Libertas wireless NICs. #device mwl # Marvell 88W8363 802.11n wireless NICs. #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wpi # Intel 3945ABG wireless NICs. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support device tun # Packet tunnel. device pty # BSD-style compatibility pseudo ttys device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device xhci # XHCI PCI->USB interface (USB 3.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices (needs netgraph) device uhid # "Human Interface Devices" #device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse device urio # Diamond Rio 500 MP3 player # USB Serial devices #device u3g # USB-based 3G modems (Option, Huawei, Sierra) #device uark # Technologies ARK3116 based serial adapters #device ubsa # Belkin F5U103 and compatible serial adapters #device uftdi # For FTDI usb serial adapters device uipaq # Some WinCE based devices #device uplcom # Prolific PL-2303 serial adapters #device uslcom # SI Labs CP2101/CP2102 serial adapters #device uvisor # Visor and Palm devices #device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device run # Ralink Technology RT2700/RT2800/RT3000 NICs. #device uath # Atheros AR5523 wireless NICs #device upgt # Conexant/Intersil PrismGT wireless NICs. #device ural # Ralink Technology RT2500USB wireless NICs #device urtw # Realtek RTL8187B/L wireless NICs #device zyd # ZyDAS zb1211/zb1211b wireless NICs # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) #device fwip # IP over FireWire (RFC 2734,3146) #device dcons # Dumb console driver #device dcons_crom # Configuration ROM for dcons # Sound support device sound # Generic sound driver (required) #device snd_es137x # Ensoniq AudioPCI ES137x device snd_hda # Intel High Definition Audio #device snd_ich # Intel, NVidia and other ICH AC'97 Audio device snd_uaudio # USB Audio #device snd_via8233 # VIA VT8233x Audio device lindev device atapicam options COMPAT_LINUX32 options LINPROCFS options LINSYSFS options P1003_1B_SEMAPHORES options VESA device pf device pflog device pfsync device ahci [-- Attachment #3 --] GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "amd64-marcel-freebsd"... Unread portion of the kernel message buffer: obj/usr/src/sys/BEASTIE amd64 CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (1800.10-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f2 Family = 6 Model = f Stepping = 2 CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (1800.10-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f2 Family = 6 Model = f Stepping = 2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4084695040 (3895 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <A_M_I_ OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Cuse4BSD v0.1.16 @ /dev/cuse kbd1 at kbdmux0 acpi0: <A_M_I_ OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Warning: Incorrect checksum in table [OEMB] - 0xBE, should be 0xBD (20110527/tbutils-279) cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 nvidia0: <GeForce 7600 GT> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xa800-0xa81f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xa880-0xa89f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xac00-0xac1f irq 18 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbfffc00-0xfbffffff irq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 hdac0: <Intel 82801JI High Definition Audio Controller> mem 0xfbff8000-0xfbffbfff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <Marvell 88SX6101 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeaffdff irq 16 at device 0.0 on pci3 ata2: <ATA channel 0> on atapci0 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci2: <ACPI PCI bus> on pcib4 ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xcc00-0xcc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2 ale0: 960 Tx FIFO, 1024 Rx FIFO ale0: Using 1 MSI messages. ale0: 4GB boundary crossed, switching to 32bit DMA addressing mode. miibus0: <MII bus> on ale0 atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto ale0: Ethernet address: 00:24:8c:47:1c:ff uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xa080-0xa09f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2f00 usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xa400-0xa41f irq 19 at device 29.1 on pci0 uhci4: LegSup = 0x2f00 usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0 uhci5: LegSup = 0x2f00 usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbfff800-0xfbfffbff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 17 at device 1.0 on pci5 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:24:01:2f:a5:8f isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH10 AHCI SATA controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfbffe800-0xfbffefff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x117 offMax=0x22e hdac0: HDA Codec #0: Realtek ALC888 pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0 pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0 pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered ada0 at ahcich5 bus 0 scbus6 target 0 lun 0 ada0: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad16 SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 14063274 Hz quality 1000 cd0 at ata2 bus 0 scbus0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-H42L SL00> Removable CD-ROM SCSI-0 device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [11831 x 2048 byte records] cd1 at ata2 bus 0 scbus0 target 1 lun 0 cd1: <LITE-ON CD-RW SOHR-5238S 4S04> Removable CD-ROM SCSI-0 device cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd1: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Root mount waiting for: usbus7 ugen7.2: <vendor 0x046d> at usbus7 uaudio0: <vendor 0x046d product 0x081b, class 239/2, rev 2.00/0.10, addr 2> on usbus7 uaudio0: No playback! uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format uaudio0: No midi sequencer pcm4: <USB audio> on uaudio0 ugen7.3: <SanDisk> at usbus7 umass0: <SanDisk Cruzer Edge, class 0/0, rev 2.00/1.00, addr 3> on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus7 umass0:7:0:-1: Attached to scbus7 da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <SanDisk Cruzer Edge 1.03> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C) Trying to mount root from zfs:tank0 []... <118>Enter full pathname of shell or RETURN for /bin/sh: ugen6.2: <Microsoft> at usbus6 <118>sh: Cannot open /etc/termcap. <118>sh: using dumb terminal settings. <118>%cd /rescue/ <118>%./fsck -y <118>** /dev/label/boot0 <118>** Last Mounted on /boot-mount <118>** Phase 1 - Check Blocks and Sizes <118>** Phase 2 - Check Pathnames <118>** Phase 3 - Check Connectivity <118>** Phase 4 - Check Reference Counts <118>** Phase 5 - Check Cyl groups <118>3828 files, 172588 used, 85339 free (459 frags, 10610 blocks, 0.2% fragmentation) <118> <118>***** FILE SYSTEM IS CLEAN ***** <118>%./mount -u / <118>%./mount -a t? ?-t zfs <118>%./swapoon -? ??? ?? ?n -a <118>swapon: adding /dev/label/swap0 as swap device <118>%/rescue/zfs mount tak0? ?? ?nk0/usr <118>%/rescue/zfs mount tank0/usr? ?? ?? ?var <118>%cp ~pkubaj/rc.conf /etc/rcc? ?.conf <118>%echo 'dumpdev="AUTO" ?; ?? ?' /etc? ?? ?? ?? ?>> /etc/rc.conf <118>%/rescue/reboot <118>Sep 2 12:15:16 init: single user shell terminated. Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-BETA2 #5: Thu Sep 1 23:21:32 CEST 2011 root@beastie:/usr/obj/usr/src/sys/BEASTIE amd64 CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (1800.10-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f2 Family = 6 Model = f Stepping = 2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4084695040 (3895 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <A_M_I_ OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Cuse4BSD v0.1.16 @ /dev/cuse kbd1 at kbdmux0 acpi0: <A_M_I_ OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Warning: Incorrect checksum in table [OEMB] - 0xBE, should be 0xBD (20110527/tbutils-279) cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 nvidia0: <GeForce 7600 GT> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xa800-0xa81f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xa880-0xa89f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xac00-0xac1f irq 18 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbfffc00-0xfbffffff irq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 hdac0: <Intel 82801JI High Definition Audio Controller> mem 0xfbff8000-0xfbffbfff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <Marvell 88SX6101 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeaffdff irq 16 at device 0.0 on pci3 ata2: <ATA channel 0> on atapci0 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci2: <ACPI PCI bus> on pcib4 ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xcc00-0xcc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2 ale0: 960 Tx FIFO, 1024 Rx FIFO ale0: Using 1 MSI messages. ale0: 4GB boundary crossed, switching to 32bit DMA addressing mode. miibus0: <MII bus> on ale0 atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto ale0: Ethernet address: 00:24:8c:47:1c:ff uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xa080-0xa09f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2f00 usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xa400-0xa41f irq 19 at device 29.1 on pci0 uhci4: LegSup = 0x2f00 usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xa480-0xa49f irq 18 at device 29.2 on pci0 uhci5: LegSup = 0x2f00 usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbfff800-0xfbfffbff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 17 at device 1.0 on pci5 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:24:01:2f:a5:8f isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH10 AHCI SATA controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfbffe800-0xfbffefff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x117 offMax=0x32a hdac0: HDA Codec #0: Realtek ALC888 pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0 pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0 pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered ada0 at ahcich5 bus 0 scbus6 target 0 lun 0 ada0: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad16 SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 14063294 Hz quality 1000 cd0 at ata2 bus 0 scbus0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-H42L SL00> Removable CD-ROM SCSI-0 device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [11831 x 2048 byte records] cd1 at ata2 bus 0 scbus0 target 1 lun 0 cd1: <LITE-ON CD-RW SOHR-5238S 4S04> Removable CD-ROM SCSI-0 device cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd1: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Root mount waiting for: usbus7 ugen7.2: <vendor 0x046d> at usbus7 uaudio0: <vendor 0x046d product 0x081b, class 239/2, rev 2.00/0.10, addr 2> on usbus7 uaudio0: No playback! uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format uaudio0: No midi sequencer pcm4: <USB audio> on uaudio0 Root mount waiting for: usbus7 Root mount waiting for: usbus7 ugen7.3: <SanDisk> at usbus7 umass0: <SanDisk Cruzer Edge, class 0/0, rev 2.00/1.00, addr 3> on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus7 umass0:7:0:-1: Attached to scbus7 da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <SanDisk Cruzer Edge 1.03> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C) Trying to mount root from zfs:tank0 []... <118>Setting hostuuid: 007ae8c0-0001-de11-a899-00248c471cff. <118>Setting hostid: 0x09fb1df2. <118>Entropy harvesting: interrupts ethernet point_to_point kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0xc fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff804ae7d7 stack pointer = 0x28:0xffffff800022fa30 frame pointer = 0x28:0xffffff800022fa60 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = resume, IOPL = 0 current process = 12 (swi4: clock) trap number = 12 panic: page fault cpuid = 0 Uptime: 9s Dumping 283 out of 4066 MB:..6%..12%..23%..34%..46%..51%..63%..74%..85%..91% Reading symbols from /boot/kernel/zfs.ko...Reading symbols from /boot-mount/boot/kernel/zfs.ko.symbols...done. done. Loaded symbols for /boot/kernel/zfs.ko Reading symbols from /boot/kernel/opensolaris.ko...Reading symbols from /boot-mount/boot/kernel/opensolaris.ko.symbols...done. done. Loaded symbols for /boot/kernel/opensolaris.ko Reading symbols from /boot/modules/nvidia.ko...done. Loaded symbols for /boot/modules/nvidia.ko Reading symbols from /boot/modules/cuse4bsd.ko...done. Loaded symbols for /boot/modules/cuse4bsd.ko Reading symbols from /boot/modules/vboxdrv.ko...done. Loaded symbols for /boot/modules/vboxdrv.ko #0 sched_switch (td=) at /usr/src/sys/kern/sched_ule.c:1854 1854 cpuid = PCPU_GET(cpuid); (kgdb) bt #0 sched_switch (td=) at /usr/src/sys/kern/sched_ule.c:1854 #1 0xffffffff80476e54 in mi_switch (flags=) at /usr/src/sys/kern/kern_synch.c:448 #2 0xffffffff804aa9ca in sleepq_timedwait (wchan=) at /usr/src/sys/kern/subr_sleepqueue.c:652 #3 0xffffffff80476a0f in _sleep (ident=) at /usr/src/sys/kern/kern_synch.c:230 #4 0xffffffff806315fa in scheduler (dummy=) at /usr/src/sys/vm/vm_glue.c:793 #5 0xffffffff80428b53 in mi_startup () at /usr/src/sys/kern/init_main.c:258 #6 0xffffffff80271b4c in btext () #7 0xfffffe00028ff460 in ?? () #8 0xffffffff80a7f270 in bootverbose () #9 0x0000000000000000 in ?? () #10 0x0000000000000000 in ?? () #11 0xffffffff81e3dbb0 in ?? () #12 0xffffffff81e3db58 in ?? () #13 0xffffffff80a7f270 in bootverbose () #14 0xffffffff80490c95 in sched_switch (td=) at /usr/src/sys/kern/sched_ule.c:1848 Current language: auto; currently minimal (kgdb) q
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGUayU6WhWKLLgiVHrzbKToas2MLb406N05_B3UHvcEJ88CbpA>