Date: Mon, 4 Nov 2013 13:19:51 +1100 From: David Cheney <david.cheney@canonical.com> To: Ian Lepore <ian@freebsd.org> Cc: freebsd-arm@freebsd.org Subject: Re: freebsd/pandaboard Spurious interrupt detected [0x000003ff] Message-ID: <CAHPQsEQQ%2BZ29vZj%2BasoWB3mFPo-wU%2BJJ7LytGJ=q8BmPSozd_w@mail.gmail.com> In-Reply-To: <1383526716.31172.131.camel@revolution.hippie.lan> References: <CAHPQsESP2aQxYDj0J=BdDUDhQdWnxMuAJ5fPNELGqLPsR==Ktg@mail.gmail.com> <1383526716.31172.131.camel@revolution.hippie.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Ian, try now. As a question to the group, I have the following hardware Pandaboard BeagleBone Black RPi And I am trying to bring up Freebsd/arm so I can get our Go builder working again[1]. Of these candidates, which is the one you would recommend ? Cheers Dave [1] build.golang.org On Mon, Nov 4, 2013 at 11:58 AM, Ian Lepore <ian@freebsd.org> wrote: > On Mon, 2013-11-04 at 11:10 +1100, David Cheney wrote: >> Hello, >> >> I recently built a FreeBSD-CURRENT image for pandaboard (original, not >> ES), the console is flooded with these messages >> >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> Spurious interrupt detected [0x000003ff] >> >> After bootup they settle down and at a guess are related to sd card >> access. The host appears to be working ok, but it is hard to tell as >> the messages can be pretty constant >> >> root@pandaboard:~ # uname -a >> FreeBSD pandaboard 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r257562: Sun >> Nov 3 21:01:11 EST 2013 >> root@deadwood.local:/root/crochet-freebsd/work/obj/arm.armv6/usr/src/sys/PANDABOARD >> arm >> >> Can anyone offer any assistance ? >> >> Cheers >> > > If it is the sdcard, the attached patch might help. Or it might fail > completely. :) It switches over to a rewritten sd driver for TI chips, > but so far it has only been tested on the am335x, not OMAP3/4. If it > works it should give you much better performance than the old driver. > > -- Ian > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAHPQsEQQ%2BZ29vZj%2BasoWB3mFPo-wU%2BJJ7LytGJ=q8BmPSozd_w>