Date: Sun, 29 Jul 2012 13:36:04 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Steven Lawrance <stl@koffein.net> Cc: freebsd-wireless <freebsd-wireless@freebsd.org> Subject: Re: Testing 802.11n hostap on AR9220 Message-ID: <CAJ-Vmok07TyxOp_u8f7f7s5P_42yv1AL7MuA%2Bd6sM9n0wXxmAg@mail.gmail.com> In-Reply-To: <1343589599-sup-3228@soma.koffein.net> References: <1343589599-sup-3228@soma.koffein.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Sounds like a hanging aggregatipn session. Which freebsd version and linux os/niv? On Jul 29, 2012 12:37 PM, "Steven Lawrance" <stl@koffein.net> wrote: > Greetings, > > I thought I'd do some testing with a recently acquired AR9220 MiniPCI > card (a Compex WLM200NX) in AP mode. It seemed to be fine for an SSH > session but locked up as soon as I tried some bigger transfers. I'm not > sure what I should be prodding to get further details -- nothing > relevant turned up in dmesg. > > At bootup: > > ath0: <Atheros 9280> mem 0xe0080000-0xe008ffff irq 9 at device 12.0 on pci0 > [ath] enabling AN_TOP2_FIXUP > ath0: [HT] enabling HT modes > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9280 mac 128.2 RF5133 phy 13.0 > ath1: <Atheros 5212> mem 0xe00c0000-0xe00cffff irq 11 at device 14.0 on > pci0 > ath1: AR5212 mac 5.9 RF2112 phy 4.3 > > # ifconfig wlan0 > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 00:80:48:72:63:5f > inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 > inet6 fe80::280:48ff:fe72:635f%wlan0 prefixlen 64 scopeid 0xa > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap> > status: running > ssid testap channel 4 (2427 MHz 11g ht/20) bssid 00:80:48:72:63:5f > regdomain ETSI2 country AT ecm authmode OPEN privacy OFF txpower 30 > scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8 shortgi wme > burst dtimperiod 1 -dfs > > Kernel config: > > device ath > device ath_hal > device ath_pci > options AH_SUPPORT_AR5416 > device ath_rate_sample > options ATH_DIAGAPI > options ATH_ENABLE_11N > > The (Linux) client reported a bit rate of 108Mb/s. > > cheers, > -- > Steven Lawrance > stl@koffein.net > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org > " >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmok07TyxOp_u8f7f7s5P_42yv1AL7MuA%2Bd6sM9n0wXxmAg>