Date: Mon, 6 Jan 2014 06:43:08 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Alexandr <shuriku@shurik.kiev.ua> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Problem connecting to AP Message-ID: <CAJ-VmokuY5Tk_D=wQCGGw1t%2B4TJCzqDWQ6gyHOpz0==qY%2BfZaA@mail.gmail.com> In-Reply-To: <52CABD82.2070106@shurik.kiev.ua> References: <52CAB6F2.3010707@shurik.kiev.ua> <CAJ-Vmok0JFLBemBOrB0YUnJ0OkJQEwuh1Mg75W52zWxXYrDpvg@mail.gmail.com> <52CABD82.2070106@shurik.kiev.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
You still need a longer password, psk isn't WPA long. Try secretsecretsecre=
t.
-a
On 6 January 2014 06:28, Alexandr <shuriku@shurik.kiev.ua> wrote:
> I simply changed key in this listing to "secret". Yes, I tried a very
> simple configuration, no luck:
>
> network=3D{
> ssid=3D"door"
> psk=3D"secret"
> }
>
>
> 06.01.2014 16:24, Adrian Chadd =D0=BF=D0=B8=D1=88=D0=B5=D1=82:
>> The passphrase 'secret' is too short for WPA.
>>
>> I gather it's not _that_, but is it long enough to meet WPA reuirements?
>>
>> Have you tried removing the proto=3D and bssid lines? You don't strictly
>> need them.
>>
>> Thanks!
>>
>> -a
>>
>>
>> On 6 January 2014 06:00, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>> Hello,
>>>
>>> I recently upgraded system on my laptop to current with a hope to get m=
y
>>> wireless card working. Now it successfully recognized by kernel:
>>>
>>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff irq 17
>>> at device 0.0 on pci3
>>>
>>> Unfortunately, I can't connect to my home access point:
>>>
>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED
>>> bssid=3D54:e6:fc:e4:48:c4 reason=3D0
>>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared ke=
y
>>> may be incorrect
>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=3D0
>>> ssid=3D"door" auth_failures=3D10 duration=3D30
>>>
>>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless
>>> modes, radio channels on my access point, the same error.
>>>
>>> # ifconfig wlan0
>>> wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mt=
u 1500
>>> ether 68:5d:43:92:3a:88
>>> nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>> status: no carrier
>>> ssid door channel 1 (2412 MHz 11g ht/40+)
>>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>> txpower 13
>>> bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
>>> roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx am=
sdurx
>>> shortgi wme roaming MANUAL
>>>
>>> /etc/wpa_supplicant.conf:
>>>
>>> ctrl_interface=3D/var/run/wpa_supplicant
>>> ctrl_interface_group=3Dwheel
>>> eapol_version=3D2
>>>
>>> network=3D{
>>> ssid=3D"door"
>>> bssid=3D54:e6:fc:e4:48:c4
>>> key_mgmt=3DWPA-PSK
>>> proto=3DWPA RSN
>>> psk=3D"secret"
>>> }
>>>
>>>
>>> Other home devices connets to AP without problems. Can you point me how
>>> I can debug it?
>>>
>>>
>>>
>>> _______________________________________________
>>> freebsd-wireless@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.=
org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokuY5Tk_D=wQCGGw1t%2B4TJCzqDWQ6gyHOpz0==qY%2BfZaA>