Date: Tue, 23 Aug 2011 18:29:18 +0800 From: Adrian Chadd <adrian@freebsd.org> To: Kang Yin Su <cantona@cantona.net> Cc: freebsd-wireless@freebsd.org Subject: Re: AR5416 beacon issue. Message-ID: <CAJ-VmomSNinEa%2BEgNnaFQLMDRxkY72DffXdzUQ-=LL2v0FF-gg@mail.gmail.com> In-Reply-To: <CAHjFwoC%2BH91gXOE1V7sYtH3fQHNuSPK5=W=y_5_hQAYUYPa7Rw@mail.gmail.com> References: <CAHjFwoCVwRNyJ_jCgthWFvi%2Bh%2B7xy6-bt=hDrhimMVHS7--dtQ@mail.gmail.com> <CAHjFwoC%2BH91gXOE1V7sYtH3fQHNuSPK5=W=y_5_hQAYUYPa7Rw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
That's a great catch. So from memory: * there are bits that control whether the MAC generates sequence numbers or= not; * the frame type in the TX descriptor can also modify that. AR5416: * D_MISC for each DCU, bit 20: Sequence number increment disable; resets to= 0x0. * MAC_PCU_STA_ADDR_U16 - (0x8004) bit 29: REG_PRESERVE_SEQNUM: Stops PCU from replacing the sequence number AR5212: * D_MISC: same deal: bit 20 - SEQNUMINCDIS * same deal with MAC_PCU_STA_ADDR_U16 above: bit 29 30 seconds with the HAL has shown what's going on: ar5416Reset(): /* * disable seq number generation in hw */ OS_REG_WRITE(ah, AR_STA_ID1, OS_REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM); That bit isn't set for the AR5212. Try disabling that, see if it works on the AR5416. If it does, then we should (all) have a brief discussion what the "correct" behaviour is moving forward. Adrian On 23 August 2011 17:37, Kang Yin Su <cantona@cantona.net> wrote: > Hi all, > OK, this patch fix the beacons sequence number from AR5416 chips. With th= is > code added, both beacons send from AR5212 and AR5416 chips are fine, the > sequence numbers are increase by 1. I have no idea why the AR5212 chips d= o > not this require this. The AR5212 hardware probably ignore this field and > added the seq no. by itself? > Thanks, > Yin > On Tue, Aug 23, 2011 at 3:50 PM, Kang Yin Su <cantona@cantona.net> wrote: >> >> Hi All, >> Using FreeBSD HEAD create a AP, found that the beacon frames have no >> sequence number on AR5416 WiFi card, however there is sequence number on >> AR5212 WiFi card. Attached is the WiFi capture on both =A0 =A0card. >> =A000:1b:b1:59:ab:4d is AR5416 and 00:0b:6b:2d:f2:cc is AR5212. >> Thanks, >> Yin >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmomSNinEa%2BEgNnaFQLMDRxkY72DffXdzUQ-=LL2v0FF-gg>