Date: Fri, 15 Mar 2013 09:00:49 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Joshua Isom <jrisom@gmail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Fine, OK, here's my initial AR9380/AR9485 support Message-ID: <CAJ-VmongS-xwLAhxG4gK4kMTMfFHzLADdTeOMqX5M4vPg79GNw@mail.gmail.com> In-Reply-To: <78975985-a190-4915-82b5-b1810d6115b2@email.android.com> References: <5142813d.83c2e00a.67a8.39d5@mx.google.com> <514284E5.9060303@gmail.com> <CAJ-Vmok255ODmYaq5FShODzeLt9QvAeNS7Ef-7sVF5_BSoq2Vg@mail.gmail.com> <51428E10.1000801@gmail.com> <CAJ-VmokkXaNHki-yza5hBzUN9z7FhzPH3RbwLsUchm8t5toM0g@mail.gmail.com> <78975985-a190-4915-82b5-b1810d6115b2@email.android.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Yes, you can't have both ethernet and wireless up on the same L2 network like that; things will get confused. Does it all work fine if you don't have ethernet configured? adrian On 15 March 2013 06:52, Joshua Isom <jrisom@gmail.com> wrote: > I got it all working after removing the driver from the kernelconfig and a > few other tweaks. I'll post an ugly diff later when I can. I was able to get > the network working only after I forced the wired down and commented out the > rc.conf references. DHCP worked but no routing, not even the router. I don't > know if it's a FreeBSD issue or not. > > > Adrian Chadd <adrian.chadd@gmail.com> wrote: >> >> Did you remove ath/ath_hal/ath_rate_sample from your kernel config >> file when you rebuilt? >> >> The default system ships with ath/ath_hal/ath_rate_sample compiled >> into the kernel rather than as modules. >> >> Thanks, >> >> >> >> Adrian >> >> >> On 14 March 2013 19:57, Joshua Isom <jrisom@gmail.com> wrote: >>> >>> On 3/14/2013 9:20 PM, Adrian Chadd wrote: >>> >>>> Oh! >>>> >>>> http://wikidevi.com/wiki/TP-LINK_TL-WDN4800 >>>> >>>> Silly me, I was reading the wrong number on my phone. >>>> >>>> Yes, 0x0030 is Osprey (AR9380.) >>>> >>>> kldload >>>> if_ath_pci too. :-) >>>> >>>> >>>> >>>> Adrian >>> >>> >>> >>> Something weird happened. My config has ath_pci listed, but then I get >>> this. >>> >>>> [jri:~] root# kldload if_ath_pci >>>> kldload: can't load if_ath_pci: Exec format error >>>> [jri:~] root# file /boot/kernel/if_ath_pci.ko >>>> /boot/kernel/if_ath_pci.ko: ELF 64-bit LSB relocatable, x86-64, version >>>> 1 >>>> (FreeBSD), not stripped >>> >>> >>> >>> Other modules like ath return the standard "already loaded" message.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmongS-xwLAhxG4gK4kMTMfFHzLADdTeOMqX5M4vPg79GNw>