Date: Tue, 21 Aug 2018 22:29:39 -0700 From: Kevin Bowling <kevin.bowling@kev009.com> To: Roman Bogorodskiy <novel@freebsd.org> Cc: net@freebsd.org Subject: Re: igb: device_attach: igb1 attach returned 6 Message-ID: <CAK7dMtCbvFQpZYXgjkZ4gPLhHVhM19YDR8oDo8vEFQT8tCp4-Q@mail.gmail.com> In-Reply-To: <20180819142106.GA1539@kloomba> References: <20180819142106.GA1539@kloomba>
next in thread | previous in thread | raw e-mail | index | archive | help
Roman, Interesting.. can you set DBG to 1 sys/dev/e1000/e1000_osdep.h Line 109 so we can see closer what is failing to initialize? Regards, Kevin On Sun, Aug 19, 2018 at 7:21 AM, Roman Bogorodskiy <novel@freebsd.org> wrote: > Hi, > > I have a 4-port Intel I350 network card. When I plug sfp rj45 module to > one of the ports, devices fails to initialise, e.g. ifconfig(8) only > shows three igb interfaces (expected to be four): > > igb0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e505bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:12:c0:00:e9:14 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e505bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:12:c0:00:e9:16 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > igb2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=e505bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> > ether 00:12:c0:00:e9:17 > media: Ethernet autoselect > status: no carrier > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > > dmesg has the following: > > igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe060-0xe07f mem 0xf7a00000-0xf7bfffff,0xf7c0c000-0xf7c0ffff irq 16 at device 0.0 on pci1 > igb0: attach_pre capping queues at 8 > igb0: using 1024 tx descriptors and 1024 rx descriptors > igb0: msix_init qsets capped at 8 > igb0: pxm cpus: 4 queue msgs: 9 admincnt: 1 > igb0: using 4 rx queues 4 tx queues > igb0: Using MSIX interrupts with 5 vectors > igb0: allocated for 4 tx_queues > igb0: allocated for 4 rx_queues > igb0: Ethernet address: 00:12:c0:00:e9:14 > igb0: netmap queues/slots: TX 4/1024, RX 4/1024 > igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe040-0xe05f mem 0xf7800000-0xf79fffff,0xf7c08000-0xf7c0bfff irq 17 at device 0.1 on pci1 > igb1: attach_pre capping queues at 8 > igb1: Setup of Shared code failed, error -2 > igb1: IFDI_ATTACH_PRE failed 6 > device_attach: igb1 attach returned 6 > igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe020-0xe03f mem 0xf7600000-0xf77fffff,0xf7c04000-0xf7c07fff irq 18 at device 0.2 on pci1 > igb1: attach_pre capping queues at 8 > igb1: using 1024 tx descriptors and 1024 rx descriptors > igb1: msix_init qsets capped at 8 > igb1: pxm cpus: 4 queue msgs: 9 admincnt: 1 > igb1: using 4 rx queues 4 tx queues > igb1: Using MSIX interrupts with 5 vectors > igb1: allocated for 4 tx_queues > igb1: allocated for 4 rx_queues > igb1: Ethernet address: 00:12:c0:00:e9:16 > igb1: netmap queues/slots: TX 4/1024, RX 4/1024 > igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xf7400000-0xf75fffff,0xf7c00000-0xf7c03fff irq 19 at device 0.3 on pci1 > igb2: attach_pre capping queues at 8 > igb2: using 1024 tx descriptors and 1024 rx descriptors > igb2: msix_init qsets capped at 8 > igb2: pxm cpus: 4 queue msgs: 9 admincnt: 1 > igb2: using 4 rx queues 4 tx queues > igb2: Using MSIX interrupts with 5 vectors > igb2: allocated for 4 tx_queues > igb2: allocated for 4 rx_queues > igb2: Ethernet address: 00:12:c0:00:e9:17 > igb2: netmap queues/slots: TX 4/1024, RX 4/1024 > > And in pciconf(8) it shows as: > > igb0@pci0:1:0:0: class=0x020000 card=0x00101b6d chip=0x15228086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = 'I350 Gigabit Fiber Network Connection' > class = network > subclass = ethernet > none1@pci0:1:0:1: class=0x020000 card=0x00101b6d chip=0x15228086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = 'I350 Gigabit Fiber Network Connection' > class = network > subclass = ethernet > igb1@pci0:1:0:2: class=0x020000 card=0x00101b6d chip=0x15228086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = 'I350 Gigabit Fiber Network Connection' > class = network > subclass = ethernet > igb2@pci0:1:0:3: class=0x020000 card=0x00101b6d chip=0x15228086 rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = 'I350 Gigabit Fiber Network Connection' > class = network > subclass = ethernet > > Any suggestions what could be wrong with that? > > The host is FreeBSD 12.0-ALPHA1 amd64 @ r337885. I don't know how/if it > worked before, just plugged that in. > > Roman Bogorodskiy
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAK7dMtCbvFQpZYXgjkZ4gPLhHVhM19YDR8oDo8vEFQT8tCp4-Q>