Date: Thu, 16 Apr 2020 13:29:52 -0700 From: Chuck Tuffli <ctuffli@gmail.com> To: Miroslav Lachman <000.fbsd@quip.cz> Cc: Pete Wright <pete@nomadlogic.org>, Kurt Jaeger <pi@freebsd.org>, freebsd-stable@freebsd.org Subject: Re: support of PCIe NVME drives Message-ID: <CAKAYmMLkG-p4xXNq=O20PZs%2BMBU6_2nF6btLuotqNt0MAT7zeg@mail.gmail.com> In-Reply-To: <fb05bd18-eb34-5744-930b-1f2d1a77142d@quip.cz> References: <5a20f111-b2f5-c1a1-acdf-86df43d79ace@quip.cz> <20200416180705.GB39563@home.opsec.eu> <36c9c502-f9b6-fd3d-3ac2-80ab18f8d420@quip.cz> <37408503-c462-97fa-e702-f23fed366f83@nomadlogic.org> <fb05bd18-eb34-5744-930b-1f2d1a77142d@quip.cz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Apr 16, 2020 at 12:30 PM Miroslav Lachman <000.fbsd@quip.cz> wrote: > > Pete Wright wrote on 04/16/2020 20:23: > > > > > > On 4/16/20 11:12 AM, Miroslav Lachman wrote: > >> Kurt Jaeger wrote on 04/16/2020 20:07: > > > I would try booting via UEFI if you can. I just installed a laptop > > yesterday which has a nvme root device, it was detected by the 12-STABLE > > snapshot I used to boot from. no other modifications were necessary on > > my end. > > I changed BIOS settings to use UEFI boot method, booted 12.1 installer > ISO but without luck. Still no NVME disks :( > > You can see it on printscreen from iDRAC https://ibb.co/tPnymL7 > > Anything more I can test? Fair warning, I don't deal much with Dell, but it's curious that iDrac lists the device protocol as MI > Device Protocol: NVMe-MI1.0 MI or the Management Interface is defined by NVMe, but it isn't the same as a block interface. MI typically uses SMBUS and not PCIe to communicate with the device. So it's possible that the device is visible to iDrac via SMBUS but may not be on the PCIe bus for $reasons. Does iDrac have any tools to interact with the device via MI? --chuck
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKAYmMLkG-p4xXNq=O20PZs%2BMBU6_2nF6btLuotqNt0MAT7zeg>