Date: Tue, 18 Apr 2017 08:42:58 -0700 From: jungle Boogie <jungleboogie0@gmail.com> To: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: beaglebone black: MMC partition switch failed Message-ID: <CAKE2PDubyQx2VtOJQt=2NTYVDgfUzxi1UO5RDhJ_M0xVe2nZRg@mail.gmail.com> In-Reply-To: <5bac0dbc-6d2b-c757-0cd3-babbd048cfd2@gmail.com> References: <5bac0dbc-6d2b-c757-0cd3-babbd048cfd2@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 15 April 2017 at 18:50, jungle boogie <jungleboogie0@gmail.com> wrote: > Hi All, > > It's been awhile since I've been able to run FreeBSD on my BBB. It was > failing somewhere, but I didn't have good serial cable to see what was > happening. > > Using the latest freebsd head image: > FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img > > I'm writing it to my microSD card: > sudo dd if=FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img > of=/dev/sdf bs=8M > 128+0 records in > 128+0 records out > 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.01005 s, 1.1 GB/s > > > Putting it in the BB and holding s2 for three seconds as mentioned in the > FBSD Journal article[0]. > > Upon doing so, I see this: > U-Boot SPL 2017.01-rc3 (Apr 13 2017 - 12:30:59) > Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 ** > MMC partition switch failed > *** Warning - MMC partition switch failed, using default environment > > ** Partition 1 not valid on device 0 ** > spl_register_fat_device: fat register err - -1 > spl_load_image_fat: error reading image u-boot.img, err - -1 > MMC partition switch failed > *** Warning - MMC partition switch failed, using default environment > > spl: no partition table found > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > Anyone have recommendations on how to fix this?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKE2PDubyQx2VtOJQt=2NTYVDgfUzxi1UO5RDhJ_M0xVe2nZRg>