Date: Thu, 19 Jul 2012 18:34:33 -0400 From: Kim Culhan <w8hdkim@gmail.com> To: freebsd-wireless@freebsd.org Subject: Re: Please test ath(4) on HEAD (was Fwd: svn commit: r238609 - head/sys/dev/ath) Message-ID: <CAKZxVQV2SybkO3=Ue4uA8aV0CmunKDwJmCqJXquy2xeV19nbAA@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
On Thu, July 19, 2012 4:26 am, Adrian Chadd wrote: > Hi all, > > I've been knee deep in the TX and RX path lately. This is to prepare > the driver to support the newer 11n chips that Atheros makes. > > The below commit affects the TX path as a whole. I'd really appreciate > it if people would test out station, access point and adhoc mode (and > monitor/mesh if you have time.) Doubly so if you can test out say, > multi-SSID AP mode with power sleep clients and 11n aggregate traffic, > complete with some multicast traffic. > > I've tried it very lightly on my AR5210 (earliest) and AR9280 (almost > the latest) NICs. I'll test the rest out later today. So far I've only tested multi-SSID AP mode which works fine. There has been one occurance at boot of: ar5416PerCalibrationN: NF calibration didn't finish; delaying CCA through numerous boots while there was also another AP nearby so with that shut down the noise floor may be lower. My configuration for multi-SSID was arrrived at without the benefit of much 'official' documentation so if anyone has any info on configuration for multi-SSID in rc.conf and hostapd.conf files please post it to the list. The present setup has one virtual AP running in WPA2-PSK mode and the other running with authmode OPEN. I think the AR9227 hardware is designed to handle at least 3 virtual AP's Now setting up for some multicast traffic.. thanks -kim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKZxVQV2SybkO3=Ue4uA8aV0CmunKDwJmCqJXquy2xeV19nbAA>