Date: Mon, 22 Jul 2013 18:03:30 +0800 From: XiaoQI Ge <ghw@7axu.com> To: Tim Kientzle <kientzle@freebsd.org> Cc: "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: Re: Booting Beagleboard Black Message-ID: <CAKrd9eUGZRrv4xmBsKXvwRR1YZmuwyjf5PBv-0qi7xiFr_Rd=g@mail.gmail.com> In-Reply-To: <CAA561B6-5A7A-4371-8445-4ED0A2F82B84@freebsd.org> References: <CAB3ij4C-H5iutjPp=57BtTQFZpM1iZhz-ku0wRBnKodkt1YK-Q@mail.gmail.com> <97D78167-9428-4005-89EE-15A78F74BE46@gromit.dlib.vt.edu> <CAB3ij4DR8KJpVZCCxtHtG2QMWZGAdnjfDw5127CuwemgMY=FCA@mail.gmail.com> <44AB19F7-A0D3-4F0C-A1F4-66AA49283387@gromit.dlib.vt.edu> <CAB3ij4Bd8tPHQ8xuZF7yobog4Rs1rt3skEFRdKkVAJnjMX0Xig@mail.gmail.com> <D766D953-DE47-4936-9A3F-B548D9F450A9@kientzle.com> <CAB3ij4CuejVj4k%2BwB=coriEjmPcdcKdugEDoYPoyGtuooDLUsA@mail.gmail.com> <27AC1DB6-9D32-47AF-A1E8-A53EE3C09753@FreeBSD.org> <CAB3ij4A=0=ZzSRbzD0rkF3TnDD_yro2EMTH6Pqx0dP4RmEmE5A@mail.gmail.com> <CAA561B6-5A7A-4371-8445-4ED0A2F82B84@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I did not start successfully
U-Boot# fatload mmc 0 0x88000000 bbubldr
reading bbubldr
237048 bytes read in 33 ms (6.9 MiB/s)
U-Boot# go 0x88000000
## Starting application at 0x88000000 ...
data abort
MAYBE you should read doc/README.arm-unaligned-accesses
pc : [<8800002c>] lr : [<9f35b2d4>]
sp : 9f238e10 ip : 0000000f fp : 9f239808
r10: 00000002 r9 : 9f3adf90 r8 : 9f238f40
r7 : 9f239818 r6 : 88000000 r5 : 00000002 r4 : 9f23981c
r3 : 88000000 r2 : f8000000 r1 : 9f23981c r0 : 00000008
Flags: nZCv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2013.04-dirty (May 06 2013 - 16:12:47)
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
OMAP SD/MMC: 0
mmc_send_cmd : timeout: No status update
reading u-boot.img
reading u-boot.img
U-Boot 2013.04-dirty (May 06 2013 - 16:12:47)
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: No NAND device found!!!
0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0
U-Boot#
Startup log :
U-Boot SPL 2013.04-dirty (May 06 2013 - 16:12:47)
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
OMAP SD/MMC: 0
mmc_send_cmd : timeout: No status update
reading u-boot.img
reading u-boot.img
U-Boot 2013.04-dirty (May 06 2013 - 16:12:47)
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: No NAND device found!!!
0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0
gpio: pin 53 (gpio 53) value is 1
mmc0 is current device
micro SD card found
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 0
reading uEnv.txt
** Unable to read file uEnv.txt **
gpio: pin 55 (gpio 55) value is 1
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
U-Boot#
--
Regards.
By: XiaoQI Ge; PGP:8B09D5F7
WWW: https://www.7axu.com/
2013/7/22 Tim Kientzle <kientzle@freebsd.org>
> Please send me the Crochet build logs and I'll see if
> I can puzzle anything out.
>
> The console log from running Crochet would also be interesting.
>
> Tim
>
>
> On Jul 21, 2013, at 9:25 PM, Tom Everett wrote:
>
> > ok, I've rebuilt with a fresh source tree, fresh xdev build and fresh
> pull of crochet; same result. Should I post the crochet build logs? Could
> the fact that I'm building it on AMD64 be part of the problem?
> >
> > My host OS is:
> >
> > FreeBSD 9.1-RELEASE-p4 #0: Mon Jun 17 11:42:37 UTC 2013
> > root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
> amd64
> > CPU: AMD A8-3870 APU with Radeon(tm) HD Graphics (3000.26-MHz K8-class
> CPU)
> >
> >
> >
> > Here is the console log from the Beagle
> >
> > U-Boot 2013.04 (Jul 21 2013 - 22:07:04)
> >
> > I2C: ready
> > DRAM: 512 MiB
> > WARNING: Caches not enabled
> > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> > Using default environment
> >
> > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
> SoftConn)
> > musb-hdrc: MHDRC RTL version 2.0
> > musb-hdrc: setup fifo_mode 4
> > musb-hdrc: 28/31 max ep, 16384/16384 memory
> > USB Peripheral mode controller at 47401000 using PIO, IRQ 0
> > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx,
> SoftConn)
> > musb-hdrc: MHDRC RTL version 2.0
> > musb-hdrc: setup fifo_mode 4
> > musb-hdrc: 28/31 max ep, 16384/16384 memory
> > USB Host mode controller at 47401800 using PIO, IRQ 0
> > Net: <ethaddr> not set. Validating first E-fuse MAC
> > cpsw, usb_ether
> > Hit any key to stop autoboot: 0
> > mmc0 is current device
> > SD/MMC found on device 0
> > reading bb-uEnv.txt
> > reading bbubldr
> > 237488 bytes read in 34 ms (6.7 MiB/s)
> > reading bboneblk.dtb
> > 13946 bytes read in 7 ms (1.9 MiB/s)
> > Booting from mmc ...
> > ## Starting application at 0x88000054 ...
> > Consoles: U-Boot console
> > Compatible API signature found @9f242240
> > Number of U-Boot devices: 2
> >
> > FreeBSD/armv6 U-Boot loader, Revision 1.2
> > (root@bernice, Sun Jul 21 22:07:44 MDT 2013)
> > DRAM: 512MB
> >
> > Device: disk
> > |
> > can't load 'kernel'
> >
> > Type '?' for a list of commands, 'help' for more detailed help.
> > loader> ls
> > /
> > d .snap
> > .sujournal
> > loader>
> >
> >
> >
> > On Sun, Jul 21, 2013 at 4:02 PM, Rui Paulo <rpaulo@freebsd.org> wrote:
> > On 21 Jul 2013, at 14:42, Tom Everett <tom@khubla.com> wrote:
> >
> > > ls shows:
> > >
> > > /
> > > d .snap
> > > .sujournal
> > >
> > > and lsdev shows:
> > >
> > > disk devices:
> > > disk0 (MMC)
> > > disk0s1: DOS/Windows
> > > disk0s2: FreeBSD
> > > disk0s2a: FreeBSD UFS
> > > net devices:
> > > net0:
> > >
> > > I'm doing a fresh checkout of the entire CURRENT source tree, a
> rebuild of
> > > dev and then a rebuild of the kernel. We'll see what happens.
> >
> >
> > As you can see, your root file system has no files. This has happened to
> me in the past and I don't know why, but re-creating the image file with
> crochet seems to fix it.
> >
> > --
> > Rui Paulo
> >
> >
> >
> >
> > --
> > A better world shall emerge based on faith and understanding - Douglas
> MacArthur
>
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKrd9eUGZRrv4xmBsKXvwRR1YZmuwyjf5PBv-0qi7xiFr_Rd=g>