Date: Wed, 24 Nov 2021 09:33:33 -0500 From: Juan David Hurtado G <jdhurtado@orbiware.com> To: freebsd-arm@freebsd.org Subject: Re: 13.0-RELEASE Poor performance on Raspberry pi 3 B+ Message-ID: <CAL3Ut_Y_BLbGM1WZ%2B8JbkSp9F=s9_xcWbFikLpcOufioxd1m_g@mail.gmail.com> In-Reply-To: <CAL3Ut_bFZhWKThHJsPaa%2BP0JXH6-=e3Pxv3xF3Y0u9dXpQ3kZQ@mail.gmail.com> References: <CAL3Ut_bFZhWKThHJsPaa%2BP0JXH6-=e3Pxv3xF3Y0u9dXpQ3kZQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--000000000000c723ae05d189bed8 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Thanks to @evadot and @f451 on Discord, seems there is the issue: Raspberry Pi 3B+ ``` root@generic:~ # dmesg | grep -i mmcsd mmcsd0: 31GB <SDHC SPCC 2.0 SN 1072013D MFG 08/2017 by 49 SP> at mmc0 0.4MHz/4bit/65535-block ``` Raspberry Pi 4 with a different card: ``` mmcsd0: 31GB <SDHC 00000 0.0 SN 0000509F MFG 09/2019 by 159 TI> at mmc1 0.4MHz/4bit/65535-block ``` So no matter the pi or the card, the microsd clock is at 0.4MHz while in raspios same cards gets 50 MHz apparently Seems that explain the behaviour... So is this a FreeBSD bug? or a card issue even if I've tested with different cards? PS: A brand new sandisk ultra is on the way so I can test with it. El lun, 22 nov 2021 a las 21:42, Juan David Hurtado G (< jdhurtado@orbiware.com>) escribi=C3=B3: > Hi, I'm trying to use the OS on a Raspberry pi 3 B+ > > Boot is pretty slow. It hangs on `ue0: Ethernet addresss: ...` for some > minutes before showing the `login:` to enter the username. When I enter i= t, > it takes a few seconds to ask for the password. > > While doing `freebsd-update fetch install` it took a plenty of minutes, s= o > I canceled the process and then did `freebsd-update fetch` and then > `freebsd-update install` to see what was going on. > > Found that the process was at `wdraid` state. Doing a simple search, I > found about `vfs.hirunningspace` so I tweaked it to 1Mb and then to 2Mb. = It > seems to help, but not by much. Look at this: > > freebsd@generic:~ % time freebsd-version -kru > 13.0-RELEASE-p4 > 13.0-RELEASE-p4 > 13.0-RELEASE-p5 > 0.365u 0.045s 0:41.25 0.9% 20+177k 14+0io 0pf+0w > > :( > > What could I be missing? Maybe I need to tweak partitions and use some > kind of configuration/optimization? how? I do appreciate any guidance you > can provide in order to troubleshoot this. > > PS: I don't think it is the microsd card since it runs raspios fine. > > PS2: The red led is turned off at the boot process so no way of knowing > visually if the pi is running. Weird is that the led turned on again afte= r > `shutdown -p now` hehe. > > -- > Juan David Hurtado G > --=20 Juan David Hurtado G (+57) 319 252 3773 www.orbiware.com --000000000000c723ae05d189bed8--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAL3Ut_Y_BLbGM1WZ%2B8JbkSp9F=s9_xcWbFikLpcOufioxd1m_g>