Date: Fri, 15 Jun 2012 09:40:45 -0700 From: Kevin Oberman <kob6558@gmail.com> To: Ronald Klop <ronald-freebsd8@klop.yi.org> Cc: freebsd-stable@freebsd.org Subject: Re: devd problem with 9-stable Message-ID: <CAN6yY1tnK4s0L_eC1R0BEZEd9O_f1MYHsq_h1K_7w84zj0vV7g@mail.gmail.com> In-Reply-To: <op.wfx8zifw8527sy@ronaldradial.versatec.local> References: <CAN6yY1vOHDJzbScVFmgMdnL4JZGb2HUvh=DnL0GNdiH0OUpZ8w@mail.gmail.com> <op.wfv09jqu8527sy@ronaldradial.versatec.local> <CAN6yY1sGp47FZnkX0UuCzH__XXPwO3GVzywT%2B00_SNSg2g-Ywg@mail.gmail.com> <op.wfxpy80b8527sy@ronaldradial.versatec.local> <alpine.BSF.2.00.1206150746510.25418@wonkity.com> <op.wfx8zifw8527sy@ronaldradial.versatec.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jun 15, 2012 at 7:53 AM, Ronald Klop
<ronald-freebsd8@klop.yi.org> wrote:
> On Fri, 15 Jun 2012 15:50:49 +0200, Warren Block <wblock@wonkity.com> wro=
te:
>
>> On Fri, 15 Jun 2012, Ronald Klop wrote:
>>
>>> On Fri, 15 Jun 2012 08:01:21 +0200, Kevin Oberman <kob6558@gmail.com>
>>> wrote:
>>>
>>>> On Thu, Jun 14, 2012 at 3:11 AM, Ronald Klop
>>>> <ronald-freebsd8@klop.yi.org> wrote:
>>>>>
>>>>> On Thu, 14 Jun 2012 02:41:58 +0200, Kevin Oberman <kob6558@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Since updating my systems to 9-Stable, I am not getting my smartcard
>>>>>> reader attached when hot-plugged.
>>>>>>
>>>>>>> From devd.conf
>>>>>>
>>>>>> =C2=A0attach 50 {
>>>>>> =C2=A0 =C2=A0 =C2=A0device-name "ugen[0-9]+";
>>>>>> =C2=A0 =C2=A0 =C2=A0match "vendor" "0x0529";
>>>>>> =C2=A0 =C2=A0 =C2=A0match "product" "0x0600";
>>>>>> =C2=A0 =C2=A0 =C2=A0action "/usr/local/sbin/openct-control attach us=
b:529/600 usb
>>>>>> /dev/$dev$
>>>>>> };
>>>>>> detach 50 {
>>>>>> =C2=A0 =C2=A0 =C2=A0device-name "ugen[0-9]+";
>>>>>> =C2=A0 =C2=A0 =C2=A0match "vendor" "0x0529";
>>>>>> =C2=A0 =C2=A0 =C2=A0match "product" "0x0600";
>>>>>> =C2=A0 =C2=A0 =C2=A0action "/usr/bin/pkill -fx '/usr/local/sbin/ifdh=
andler -H -p
>>>>>> [a-z0-9]+ $
>>>>>> };
>>>>>> =C2=A0If I manually enter the "action" command, it works fine, but i=
t fails
>>>>>> when I insert the device. It worked fine under version 8. I have
>>>>>> confirmed devd is seeing the device inserted just fine. the action
>>>>>> just does not seem to be carried out.
>>>>>> =C2=A0Any idea where I should look? I saw a couple of threads on cur=
rent
>>>>>> from others seeing something similar, but could find no resolution.
>>>>>> I have seen a
>>>>>
>>>>> =C2=A0Did you run devd with debug messages on? Options -D and -d are
>>>>> helpful.
>>>>> If you do does devd match the right devd.conf sections and start the
>>>>> action?
>>>>
>>>> =C2=A0With debug i get:
>>>> Processing event '!system=3DUSB subsystem=3DDEVICE type=3DATTACH
>>>> ugen=3Dugen1.3 cdev=3Dugen1.3 vendor=3D0x0529 product=3D0x0600 devclas=
s=3D0xff
>>>> devsubclass=3D0x00 sernum=3D"" release=3D0x0100 mode=3Dhost port=3D1
>>>> parent=3Dugen1.2'
>>>> [long list of "Testing" entries, none of which 'vendor' matched]
>>>> Executing 'logger Unknown USB device: vendor 0x0529 product 0x0600 bus
>>>> uhub3'
>>>> =C2=A0So it looks like devd is not matching the vendor. But my devd.co=
nf
>>>> file contains that vendor. I don't know exactly why it is not being
>>>> tested against. Nothing in the debug output gives me a clue and I
>>>> tried grepping for one of the tested vendor IDs in /etc/devd.conf and
>>>> /etc/devd/*.conf. =C2=A0Not found.
>>>> =C2=A0I am at a loss.
>>>
>>>
>>> http://www.freebsd.org/releases/9.0R/errata.html
>>> See point 3 under Open Issues.
>>
>>
>> Even with those changes, devd is not triggering on my scanner attach:
>>
>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 match "subsystem" "DEVICE";
>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 match "type" "ATTACH";
>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 match "cdev" "ugen[0-9]+.[0-9]+";
>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 match "vendor" "0x04b8";
>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 match "product" "0x010a";
>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 action "echo HERE! $cdev > /tmp/zoot";
>>
>> # devd -d -D -f /etc/devd/wb.conf
>>
>> Processing event '!system=3DUSB subsystem=3DDEVICE type=3DATTACH ugen=3D=
ugen0.6
>> cdev=3Dugen0.6 vendor=3D0x04b8 product=3D0x010a devclass=3D0xff devsubcl=
ass=3D0xff
>> sernum=3D"" release=3D0x0103 mode=3Dhost port=3D4 parent=3Dugen0.4'
>> Pushing table
>> setting system=3DUSB
>> setting subsystem=3DDEVICE
>> setting type=3DATTACH
>> setting ugen=3Dugen0.6
>> setting cdev=3Dugen0.6
>> setting vendor=3D0x04b8
>> setting product=3D0x010a
>> setting devclass=3D0xff
>> setting devsubclass=3D0xff
>> setting sernum=3D
>> setting release=3D0x0103
>> setting mode=3Dhost
>> setting port=3D4
>> setting parent=3Dugen0.4
>> Processing notify event
>> Testing system=3DUSB against ^DEVFS
>> Testing system=3DUSB against ^DEVFS
>> Popping table
>>
>
> I tried the same attaching my webcam on pcbsd in vmware.
>
> [root@pcbsd-1684 /etc/devd]# cat /tmp/bla.conf
> notify 100 {
>
> =C2=A0match "subsystem" "DEVICE";
> =C2=A0match "type" "ATTACH";
> =C2=A0match "cdev" "ugen[0-9]+.[0-9]+";
> =C2=A0match "vendor" "0x2232";
> =C2=A0match "product" "0x1008";
> =C2=A0action "echo HERE! $cdev >> /tmp/bla.log";
> =C2=A0};
>
> # devd -d -D -f /tmp/bla.conf
> ...
> Processing event '!system=3DUSB subsystem=3DDEVICE type=3DATTACH ugen=3Du=
gen1.2
> cdev=3Dugen1.2 vendor=3D0x2232 product=3D0x1008 devclass=3D0xef devsubcla=
ss=3D0x02
> sernum=3D"" release=3D0x0019 mode=3Dhost port=3D1 parent=3Dugen1.1'
>
> =C2=A0Pushing table
> setting system=3DUSB
> setting subsystem=3DDEVICE
> setting type=3DATTACH
> setting ugen=3Dugen1.2
> setting cdev=3Dugen1.2
> setting vendor=3D0x2232
> setting product=3D0x1008
> setting devclass=3D0xef
> setting devsubclass=3D0x02
> =C2=A0setting sernum=3D
> setting release=3D0x0019
> setting mode=3Dhost
> setting port=3D1
> setting parent=3Dugen1.1
> Processing notify event
> Testing subsystem=3DDEVICE against ^DEVICE
> Testing type=3DATTACH against ^ATTACH
> Testing cdev=3Dugen1.2 against ^ugen[0-9]+.[0-9]+
> =C2=A0Testing vendor=3D0x2232 against ^0x2232
> Testing product=3D0x1008 against ^0x1008
> Executing 'echo HERE! ugen1.2 >> /tmp/bla.log'
> Popping table
>
> [root@pcbsd-1684 /etc/devd]# cat /tmp/bla.log
> HERE! ugen1.2
>
> Do you see a significant difference with your setup?
Switched to 'notify' with:
notify 50 {
match "system" "USB"
match "subsystem" "DEVICE";
match "type" "ATTACH";
match "cdev" "ugen[0-9\.]+";
match "vendor" "0x0529";
match "product" "0x0600";
action "/usr/local/sbin/openct-control attach usb:529/600 usb /dev/=
$devi
ce-name";
};
I still see no attempt to match against vendor 0x0529. Still no go.
(Note that I prefer the [0-9\.] + syntax, but tried yours, as well.)
The real issue is that devd seems to have a long list of vendors that
it matches against, but 0x529 is not in that list, so matching the
device name is not likely an issue.
--=20
R. Kevin Oberman, Network Engineer
E-mail: kob6558@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN6yY1tnK4s0L_eC1R0BEZEd9O_f1MYHsq_h1K_7w84zj0vV7g>