Date: Fri, 17 Jul 2015 19:27:06 -0700 From: Kevin Oberman <rkoberman@gmail.com> To: Glen Barber <gjb@freebsd.org> Cc: FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: Head from yesterday's snapshot fails to mount root Message-ID: <CAN6yY1vhk_dGr-qcqvXZr3Rxj48RpmnfiCKFmvqH-DAW7Rcmow@mail.gmail.com> In-Reply-To: <CAN6yY1uo90_tJMOmXbxfSi-=AhQQyWEDtdnLR8qUfqFxH_RoCg@mail.gmail.com> References: <CAN6yY1txGzm8RywyrqNtdXZuU0iJ=MowTJvP-ivcx1UyqxsOcw@mail.gmail.com> <20150718005900.GG1438@FreeBSD.org> <20150718005954.GH1438@FreeBSD.org> <CAN6yY1uo90_tJMOmXbxfSi-=AhQQyWEDtdnLR8qUfqFxH_RoCg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Never mind! I see the problem. Sorry for the noise. Kevin Oberman, Network Engineer, Retired E-mail: rkoberman@gmail.com PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683 On Fri, Jul 17, 2015 at 7:23 PM, Kevin Oberman <rkoberman@gmail.com> wrote: > On Fri, Jul 17, 2015 at 5:59 PM, Glen Barber <gjb@freebsd.org> wrote: > >> On Sat, Jul 18, 2015 at 12:59:00AM +0000, Glen Barber wrote: >> > On Fri, Jul 17, 2015 at 05:52:58PM -0700, Kevin Oberman wrote: >> > > I just tried to install HEAD from the July 16 snapshot. Installation >> went >> > > fine using all defaults. (I am trying to test whether a problem with >> resume >> > > is present with HEAD.) >> > > >> > > I booted up the system from a USB drive with no problems until it >> tried to >> > > mount root. It simply sat "Waiting for /dev/da0p2" forever (or more >> than >> > > the 3 minutes I waited). System is a Lenovo ThinkPad T520 (amd64) >> that runs >> > > 10.2-BETA1 (r285359) without any issues other than the inability to >> resume/ >> > > >> > > da0 is an old 120GB USB drive and I can mount and examine it using >> either >> > > the install system or 10.2-BETA1 system. >> > > >> > > This is my first experience with HEAD since the release of 10.0. The >> boot >> > > looks quite normal and the UMASS and da0 devices show up and look >> normal. >> > > ugen1.3: <JMicron> at usbus1 >> > > umass0: <MSC Bulk-Only Transfer> on usbus1 >> > > umass0: SCSI over Bulk-Only; quirks = 0x4000 >> > > umass0:5:0:-1: Attached to scbus5 >> > > da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 >> > > da0: <WDC WD12 00UE-00KVT0 3K01> Fixed Direct Access SCSI-2 device >> > > da0: Serial Number D578C6060290 >> > > da0: 40.000MB/s transfers >> > > da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C) >> > > da0: quirks=0x2<NO_6_BYTE> >> > > >> > > Would screen shots of the boot help? (I sure see anything unusual.) >> Is this >> > > a known issue? >> > > >> > >> > Yes, please provide screenshots. I did not observe this, although this >> > does not sound like a problem with the image(s), necessarily. >> > >> >> Also, just for science, can you also try the 10.2-BETA2 images that were >> uploaded today? >> >> Glen >> >> > Boot pics are at: http://ykoberman.dlinkddns.com/FreeBSD/ > > I'll give the 10.2-BETA2 a try as soon as I can, probably later tonight. > I'll admit that it's been a long time since I tried this... the first from > a memstick image. > -- > Kevin Oberman, Network Engineer, Retired > E-mail: rkoberman@gmail.com > PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683 > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN6yY1vhk_dGr-qcqvXZr3Rxj48RpmnfiCKFmvqH-DAW7Rcmow>