Date: Thu, 2 Aug 2018 18:55:04 +0100 From: Warner Losh <imp@bsdimp.com> To: Ian Lepore <ian@freebsd.org> Cc: Daniel Braniss <danny@cs.huji.ac.il>, "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: Re: booting current from nano-neo/allwinner now failes Message-ID: <CANCZdfqznVB9pBTHpa19irtd79Fu%2BsGYe3SYgb%2BQcnMSwfNXkA@mail.gmail.com> In-Reply-To: <1533227944.1369.37.camel@freebsd.org> References: <F926A7B8-F908-449C-9563-61CEB4C2CBAF@cs.huji.ac.il> <CANCZdfrYus9O0H1oXF8-66fvSjxozdHfO9ZZsc7NEmrc1EJCzQ@mail.gmail.com> <48C92770-DFCE-45D6-B92E-FD5202585AE9@cs.huji.ac.il> <1533227944.1369.37.camel@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Aug 2, 2018, 5:39 PM Ian Lepore <ian@freebsd.org> wrote: > On Thu, 2018-08-02 at 19:31 +0300, Daniel Braniss wrote: > > > > > > > > On 2 Aug 2018, at 19:26, Warner Losh <imp@bsdimp.com> wrote: > > > > > > Try the latest ubldr > > > There was a change in the last day that should fix this.. > > > > > I thought I had the latest, will try again. > > BTW, I only updated the u-boot, and now it=E2=80=99s trying to boot via= the > > net!, and the ether is actually working, > > i=E2=80=99ll compile a kernel with nfs root support =E2=80=A6 > > > > thanks, > > danny > > > > Well, no, it's failing to boot via net, and if it's modern uboot, it > will always fail. There is a "net device" in ubldr, but when it tries > to probe, uboot fails to respond, because CONFIG_API no longer supports > network devices in modern uboot that uses DM (Device Manager). > > The only way to netboot with modern uboot is via UEFI. Unfortunately, > you don't get the kind of local control that ubldr provided; the boot > parameters (where to find the root filesystem, etc) must come from the > dhcp/bootp server. That's a bit of a showstopper for many folks who > don't have that level of control over the dhcp server config. > Is that a UEFI issue. Or our loader.efi needs X, Y or Z? Warner -- Ian > > > > > > > > > Warner > > > > > > On Thu, Aug 2, 2018, 3:36 PM Daniel Braniss <danny@cs.huji.ac.il > > > <mailto:danny@cs.huji.ac.il>> wrote: > > > Hi, > > > my last working version is from r333513, so im trying the latest, > > > and with the old u-boot/ubldr I > > > get as far as: > > > > > > U-Boot SPL 2017.09 (Feb 11 2018 - 10:52:39) > > > DRAM: 512 MiB > > > Trying to boot from MMC1 > > > > > > > > > U-Boot 2017.09 (Feb 11 2018 - 10:52:39 +0200) Allwinner Technology > > > > > > CPU: Allwinner H3 (SUN8I 1680) > > > Model: FriendlyARM NanoPi NEO > > > DRAM: 512 MiB > > > MMC: SUNXI SD/MMC: 0 > > > *** Warning - bad CRC, using default environment > > > > > > In: serial > > > Out: serial > > > Err: serial > > > Net: phy interface0 > > > eth0: ethernet@1c30000 > > > starting USB... > > > USB0: USB EHCI 1.00 > > > USB1: USB OHCI 1.0 > > > scanning bus 0 for devices... 1 USB Device(s) found > > > scanning usb for storage devices... 0 Storage Device(s) found > > > Hit any key to stop autoboot: 0 > > > switch to partitions #0, OK > > > mmc0 is current device > > > Scanning mmc 0:1... > > > Found FreeBSD U-Boot Loader (bin) > > > reading ubldr.bin > > > 238552 bytes read in 39 ms (5.8 MiB/s) > > > ## Starting application at 0x42000000 ... > > > Consoles: U-Boot console > > > Compatible U-Boot API signature found @0x5bf3f3c0 > > > > > > FreeBSD/armv7 U-Boot loader, Revision 1.2 > > > (Wed Mar 7 13:42:45 IST 2018 danny@pe-44) > > > > > > DRAM: 512MB > > > MMC Device 1 not found > > > MMC Device 2 not found > > > MMC Device 3 not found > > > Number of U-Boot devices: 1 > > > U-Boot env: loaderdev not set, will probe all devices. > > > Found U-Boot device: disk > > > Probing all disk devices... > > > Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good. > > > Booting from disk0s2: > > > Loading /boot/defaults/loader.conf > > > /boot/kernel/kernel data=3D0x6fde64+0xa619c > > > syms=3D[0x4+0x81d80+0x4+0xd41b9] > > > / > > > Hit [Enter] to boot immediately, or any other key for command > > > prompt. > > > Booting [/boot/kernel/kernel]... > > > /boot/dtb/sun8i-h3-nanopi-neo.dtb size=3D0x5c1a > > > Loaded DTB from file 'sun8i-h3-nanopi-neo.dtb'. > > > Kernel entry at 0x42200100... > > > Kernel args: (null) > > > > > > > > > if I update to the latest u-boot/ubldr it failes trying to read > > > from disk: > > > > > > U-Boot SPL 2018.07 (Aug 01 2018 - 17:37:02 +0300) > > > DRAM: 512 MiB > > > Trying to boot from MMC1 > > > > > > > > > U-Boot 2018.07 (Aug 01 2018 - 17:37:02 +0300) Allwinner Technology > > > > > > CPU: Allwinner H3 (SUN8I 1680) > > > Model: FriendlyARM NanoPi NEO > > > DRAM: 512 MiB > > > MMC: SUNXI SD/MMC: 0 > > > Loading Environment from FAT... *** Warning - bad CRC, using > > > default environment > > > > > > Failed (-5) > > > In: serial > > > Out: serial > > > Err: serial > > > Net: phy interface0 > > > eth0: ethernet@1c30000 > > > starting USB... > > > USB0: USB EHCI 1.00 > > > USB1: USB OHCI 1.0 > > > scanning bus 0 for devices... 1 USB Device(s) found > > > scanning usb for storage devices... 0 Storage Device(s) found > > > Hit any key to stop autoboot: 0 > > > switch to partitions #0, OK > > > mmc0 is current device > > > Scanning mmc 0:1... > > > Found U-Boot script /boot.scr > > > 199 bytes read in 1 ms (194.3 KiB/s) > > > ## Executing script at 43100000 > > > 288084 bytes read in 19 ms (14.5 MiB/s) > > > ## Starting application at 0x42000000 ... > > > Consoles: U-Boot console > > > Compatible U-Boot API signature found @0x5bf524e8 > > > > > > FreeBSD/armv7 U-Boot loader, Revision 1.2 > > > (Wed Aug 1 18:30:42 IDT 2018 danny@dell) > > > > > > DRAM: 512MB > > > Number of U-Boot devices: 1 > > > U-Boot env: loaderdev not set, will probe all devices. > > > Found U-Boot device: disk > > > Probing all disk devices... > > > Checking unit=3D0 slice=3D<auto> partition=3D<auto>... > > > Checking unit=3D1 slice=3D<auto> partition=3D<auto>... > > > Checking unit=3D2 slice=3D<auto> partition=3D<auto>... > > > Checking unit=3D3 slice=3D<auto> partition=3D<auto>... > > > Checking unit=3D4 slice=3D<auto> partition=3D<auto>... > > > Checking unit=3D5 slice=3D<auto> partition=3D<auto>... > > > Found U-Boot device: net > > > Booting from net0: > > > net_probe: no network devices found, maybe not enumerated yet..? > > > netboot: couldn't probe uboot_eth0 > > > net_open: netif_open() failed > > > net_probe: no network devices found, maybe not enumerated yet..? > > > netboot: couldn't probe uboot_eth0 > > > net_open: netif_open() failed > > > > > > net_probe: no network devices found, maybe not enumerated yet..? > > > =E2=80=A6 > > > > > > > > > I know that this board is not really supported but it=E2=80=99s liste= d in h > > > ttps://wiki.freebsd.org/FreeBSD/arm/Allwinner > > > <https://wiki.freebsd.org/FreeBSD/arm/Allwinner> > > > <https://wiki.freebsd.org/FreeBSD/arm/Allwinner > > > <https://wiki.freebsd.org/FreeBSD/arm/Allwinner>> > > > in any case I would like to help but things are getting too > > > complicated :-) > > > > > > > > > thanks, > > > danny > > > > > > > > > > > > > > > _______________________________________________ > > > freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mailing > > > list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > > > <https://lists.freebsd.org/mailman/listinfo/freebsd-arm> > > > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.o > > > rg <mailto:freebsd-arm-unsubscribe@freebsd.org>" > > _______________________________________________ > > freebsd-arm@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org > > " > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANCZdfqznVB9pBTHpa19irtd79Fu%2BsGYe3SYgb%2BQcnMSwfNXkA>