Date: Thu, 2 Aug 2018 17:26:29 +0100 From: Warner Losh <imp@bsdimp.com> To: Daniel Braniss <danny@cs.huji.ac.il> Cc: "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: Re: booting current from nano-neo/allwinner now failes Message-ID: <CANCZdfrYus9O0H1oXF8-66fvSjxozdHfO9ZZsc7NEmrc1EJCzQ@mail.gmail.com> In-Reply-To: <F926A7B8-F908-449C-9563-61CEB4C2CBAF@cs.huji.ac.il> References: <F926A7B8-F908-449C-9563-61CEB4C2CBAF@cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
Try the latest ubldr There was a change in the last day that should fix this.. Warner On Thu, Aug 2, 2018, 3:36 PM Daniel Braniss <danny@cs.huji.ac.il> wrote: > Hi, > my last working version is from r333513, so im trying the latest, and wit= h > the old u-boot/ubldr I > get as far as: > > U-Boot SPL 2017.09 (Feb 11 2018 - 10:52:39) > DRAM: 512 MiB > Trying to boot from MMC1 > > > U-Boot 2017.09 (Feb 11 2018 - 10:52:39 +0200) Allwinner Technology > > CPU: Allwinner H3 (SUN8I 1680) > Model: FriendlyARM NanoPi NEO > DRAM: 512 MiB > MMC: SUNXI SD/MMC: 0 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Net: phy interface0 > eth0: ethernet@1c30000 > starting USB... > USB0: USB EHCI 1.00 > USB1: USB OHCI 1.0 > scanning bus 0 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > Found FreeBSD U-Boot Loader (bin) > reading ubldr.bin > 238552 bytes read in 39 ms (5.8 MiB/s) > ## Starting application at 0x42000000 ... > Consoles: U-Boot console > Compatible U-Boot API signature found @0x5bf3f3c0 > > FreeBSD/armv7 U-Boot loader, Revision 1.2 > (Wed Mar 7 13:42:45 IST 2018 danny@pe-44) > > DRAM: 512MB > MMC Device 1 not found > MMC Device 2 not found > MMC Device 3 not found > Number of U-Boot devices: 1 > U-Boot env: loaderdev not set, will probe all devices. > Found U-Boot device: disk > Probing all disk devices... > Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good. > Booting from disk0s2: > Loading /boot/defaults/loader.conf > /boot/kernel/kernel data=3D0x6fde64+0xa619c syms=3D[0x4+0x81d80+0x4+0xd41= b9] > / > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > /boot/dtb/sun8i-h3-nanopi-neo.dtb size=3D0x5c1a > Loaded DTB from file 'sun8i-h3-nanopi-neo.dtb'. > Kernel entry at 0x42200100... > Kernel args: (null) > > > if I update to the latest u-boot/ubldr it failes trying to read from disk= : > > U-Boot SPL 2018.07 (Aug 01 2018 - 17:37:02 +0300) > DRAM: 512 MiB > Trying to boot from MMC1 > > > U-Boot 2018.07 (Aug 01 2018 - 17:37:02 +0300) Allwinner Technology > > CPU: Allwinner H3 (SUN8I 1680) > Model: FriendlyARM NanoPi NEO > DRAM: 512 MiB > MMC: SUNXI SD/MMC: 0 > Loading Environment from FAT... *** Warning - bad CRC, using default > environment > > Failed (-5) > In: serial > Out: serial > Err: serial > Net: phy interface0 > eth0: ethernet@1c30000 > starting USB... > USB0: USB EHCI 1.00 > USB1: USB OHCI 1.0 > scanning bus 0 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > Found U-Boot script /boot.scr > 199 bytes read in 1 ms (194.3 KiB/s) > ## Executing script at 43100000 > 288084 bytes read in 19 ms (14.5 MiB/s) > ## Starting application at 0x42000000 ... > Consoles: U-Boot console > Compatible U-Boot API signature found @0x5bf524e8 > > FreeBSD/armv7 U-Boot loader, Revision 1.2 > (Wed Aug 1 18:30:42 IDT 2018 danny@dell) > > DRAM: 512MB > Number of U-Boot devices: 1 > U-Boot env: loaderdev not set, will probe all devices. > Found U-Boot device: disk > Probing all disk devices... > Checking unit=3D0 slice=3D<auto> partition=3D<auto>... > Checking unit=3D1 slice=3D<auto> partition=3D<auto>... > Checking unit=3D2 slice=3D<auto> partition=3D<auto>... > Checking unit=3D3 slice=3D<auto> partition=3D<auto>... > Checking unit=3D4 slice=3D<auto> partition=3D<auto>... > Checking unit=3D5 slice=3D<auto> partition=3D<auto>... > Found U-Boot device: net > Booting from net0: > net_probe: no network devices found, maybe not enumerated yet..? > netboot: couldn't probe uboot_eth0 > net_open: netif_open() failed > net_probe: no network devices found, maybe not enumerated yet..? > netboot: couldn't probe uboot_eth0 > net_open: netif_open() failed > > net_probe: no network devices found, maybe not enumerated yet..? > =E2=80=A6 > > > I know that this board is not really supported but it=E2=80=99s listed in > https://wiki.freebsd.org/FreeBSD/arm/Allwinner < > https://wiki.freebsd.org/FreeBSD/arm/Allwinner>; > in any case I would like to help but things are getting too complicated > :-) > > > thanks, > danny > > > > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANCZdfrYus9O0H1oXF8-66fvSjxozdHfO9ZZsc7NEmrc1EJCzQ>