Date: Tue, 19 May 2020 11:28:46 -0400 From: David Mehler <dave.mehler@gmail.com> To: bob prohaska <fbsd@www.zefox.net> Cc: freebsd-arm@freebsd.org Subject: Re: FreeBSD 12.1 on Raspberry Pi 3B+, completely headless? Message-ID: <CAPORhP4u7cvnJ=dzBBAa3GPS0gMrnAT2jEXhX6BNYPG92pGC1g@mail.gmail.com> In-Reply-To: <20200519152449.GA67494@www.zefox.net> References: <CAPORhP4wTqc0xZLatb=K0TozrAYogE7qXQ6Bw5WAynhAzW-QPQ@mail.gmail.com> <20200518184007.GA64715@www.zefox.net> <CAPORhP6gqvp_MSxsO9__C-EvXcEpRfVwYW1HnujFL_TpNXnNfw@mail.gmail.com> <20200518213741.GA65006@www.zefox.net> <CAPORhP70pXC-_o_us4crY3wdfvRxNM1%2BnTiE220Bwf7SaBtkXg@mail.gmail.com> <20200518235138.GB65006@www.zefox.net> <CAPORhP7jetavYhvZ2ZJf0T3p6yGwQHjUC0r9Jm89=%2Bq-A8JHDw@mail.gmail.com> <20200519152449.GA67494@www.zefox.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Thanks. I did a dd and there were no errors when writing the image to the sd card. I did put a raspbian image on this same card and pi and it worked just fine. Thanks. Dave. On 5/19/20, bob prohaska <fbsd@www.zefox.net> wrote: > On Tue, May 19, 2020 at 06:04:47AM -0400, David Mehler wrote: >> Hello, >> >> I'll look in to a monitor and keyboard, but given where the Pi is that >> could a bit getting one there. >> > > I'd reverse the priorities initially: Make it work where I can see what's > going on, then make it work where I want to use it. A serial console is > essential if you want to do anything even slightly adventurous. A work > bench with an internet connection, second computer and comfy chair is > the way to make progress. > > >> One thing I thought of is do I have the right image? If it's suppose >> to boot, and at least get an ip and respond to ping, but if it's >> getting stuck in single-user mode then maybe my image is wrong. This >> is the filename of the image I wrote to the sd card for the Pi: >> >> FreeBSD-12.1-RELEASE-arm64-aarch64-RPI3.img >> > The image file name looks correct, but plenty more can be wrong. > The microSD card itself must be compatible; most are but not all. > The writing process and adapter must be correct and error free. > I use dd, usually under FreeBSD or Raspbian. Errors in writing > an image can be very quiet, just a mismatch in blocks in vs out. > I've had one USB to microSD adapter fail, so that can happen. > MicroSD cards can fail, sometimes rather silently. Power supplies > can cause all sorts of confusing trouble that looks like something > _other_ than what it is. > > Later images are usually better, especially with -RELEASE, a native > image (Raspbian, in this case) is better when other uncertainties > are present.....keep it handy as a sanity check 8-) > > Hope this helps some... > > bob prohaska > >> On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: >> > On Mon, May 18, 2020 at 06:10:41PM -0400, David Mehler wrote: >> >> Hello, >> >> >> >> Thanks for the confirmation that onboard ethernet works. I've booted >> >> the pi and I'm not seeing it on the network. I've tried mounting the >> >> freebsd partition under a linux virtual machine which it's fdisk shows >> >> it as /dev/sdd2 later in the display shows it up as 15. I can not get >> >> it to mount so am not sure what rc.conf is doing, I was hoping it >> >> would get a dhcp address since it's plugged directly in. I also did >> >> add a blank ssh file to the /dev/sdd1 partition. >> >> >> >> Suggestions? >> >> >> > >> > Have you tried plugging in a monitor and keyboard temporarily, just >> > to see what's going on? My guess is that it's getting stuck in single- >> > user mode, or maybe not booting at all for some reason. It definitely >> > should pick up a DHCP connection if it gets to multi-user. I'd expect >> > that to answer ping if nothing else. >> > >> > My only experience re Linux is with Raspbian, and Raspbian absolutely >> > cannot mount ufs filesystems, so what you're seeing seems normal. >> > >> > hth, >> > >> > bob prohaska >> > >> >> Thanks. >> >> Dave. >> >> >> >> >> >> On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: >> >> > On Mon, May 18, 2020 at 05:25:40PM -0400, David Mehler wrote: >> >> >> Hello, >> >> >> >> >> >> Does the onboard ethernet on the pi 3b+ work or do I have to go USB >> >> >> wireless all the way? >> >> >> >> >> > Wired ethernet works fine on the 3B, I believe the + is the same. >> >> > >> >> > hth, >> >> > >> >> > bob prohaska >> >> > >> >> >> Thanks. >> >> >> Dave. >> >> >> >> >> >> >> >> >> On 5/18/20, bob prohaska <fbsd@www.zefox.net> wrote: >> >> >> > On Mon, May 18, 2020 at 01:02:32PM -0400, David Mehler wrote: >> >> >> >> Hello, >> >> >> >> >> >> >> >> I've got a Raspberry Pi 3b+ that I'd like to put FreeBSD 12.1 >> >> >> >> on. >> >> >> >> It >> >> >> >> is completely headless the only thing it has is it's power >> >> >> >> connection. >> >> >> >> I have downloaded and wrote to sd the latest 12.1 amd64 rpi3 >> >> >> >> image. >> >> >> > ^^^ >> >> >> > Typo? >> >> >> > >> >> >> _______________________________________________ >> >> >> freebsd-arm@freebsd.org mailing list >> >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> >> >> To unsubscribe, send any mail to >> >> >> "freebsd-arm-unsubscribe@freebsd.org" >> >> > >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPORhP4u7cvnJ=dzBBAa3GPS0gMrnAT2jEXhX6BNYPG92pGC1g>