Date: Fri, 5 Jun 2009 10:28:49 -0400 From: Michael Starling <mlstarling31@hotmail.com> To: <freebsd-hardware@freebsd.org> Subject: Monitor Hardware RAID Message-ID: <COL104-W28E35F59E3E7DC8F74C98DD4480@phx.gbl>
next in thread | raw e-mail | index | archive | help
I just installed FreeBSD 7.2 on a Dell T100 PowerEdge server with 2
500GB SATA drives. The server has the Dell sas6ir RAID controller card. The=
output from dmesg shows RAID 1 enabled and both disk are healthy. My quest=
ion is this...How can I be sure that the RAID is
functioning properly and/or how can I monitor the RAID device for failures =
etc..? I'm new
to FreeBSD so forgive me if this is a simple question. Thanks
dmesg|grep mpt
mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xdfdec000-0xdfdef=
fff=2C0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci1
mpt0: [ITHREAD]
mpt0: MPI Version=3D1.5.18.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 1 Active Volume (2 Max)
mpt0: 2 Hidden Drive Members (14 Max)
mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-Re=
Sync )
mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
mpt0:vol0(mpt0:0:0): 2 Members:
(mpt0:1:8:0): Primary Online
(mpt0:1:1:0): Secondary Online
mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
mpt0:vol0(mpt0:0:0): Status ( Enabled )
(mpt0:vol0:1): Physical (mpt0:0:1:0)=2C Pass-thru (mpt0:1:0:0)
(mpt0:vol0:1): Online
(mpt0:vol0:0): Physical (mpt0:0:8:0)=2C Pass-thru (mpt0:1:1:0)
(mpt0:vol0:0): Online
da0 at mpt0 bus 0 target 0 lun=20
_________________________________________________________________
Windows Live=99 SkyDrive=99: Get 25 GB of free online storage.
http://windowslive.com/online/skydrive?ocid=3DTXT_TAGLM_WL_SD_25GB_062009=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?COL104-W28E35F59E3E7DC8F74C98DD4480>