Date: Thu, 30 May 2013 12:35:31 +0200 From: Pietro Paolini <pulsarpietro@aol.com> To: freebsd-questions@freebsd.org Subject: VIMAGE Message-ID: <DB90C1DC-66E4-4429-A888-44F4F9E4B98B@aol.com>
next in thread | raw e-mail | index | archive | help
Hello all, I am a new bye on the FreeBSD and I am looking at the VIMAGE features = experiencing some problems. I added the options : VIMAGE if_bridge and I removed STCP then I recompiled my kernel and install it. After that, following this tutorial = http://imunes.tel.fer.hr/virtnet/eurobsdcon07_tutorial.pdf I tried the = "Exercise 2" which consist on=20 the following commands: vimage -c n1 vimage -c n2 ngctl mkpeer efface ether ether ngctl mkpeer efface ether ether ngctl mkpeer em0: bridge lower link0 ngctl name em0:lower bridge0 ngctl connect em0: bridge0: upper link1 ngctl connect ngeth0: bridge0: ether link2 ngctl connect ngeth1: bridge0: ether link3 vimage -i n1 ngeth0 e0 But my virtual interface on the n1 vimage does not receive any packet = from the external network while I can see the packet go out from it. For instance using DHCP, e0 on n1 sends DHCP packets but it does not = receive the answers (which are send, I verified it from wireshark), in = adding the ARP request for his IP address (if I try to add it statically) are = not received then it can not answer. At the end of the line the question is: how can I make this "virtual = network" and the external real network be able to communicate ? Thanks in advance. Pietro.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DB90C1DC-66E4-4429-A888-44F4F9E4B98B>