Date: Fri, 24 May 2019 10:32:11 +0000 From: qroxana <qroxana@mail.ru> To: freebsd-arm@freebsd.org Subject: BPI M1 hangs at mounting root filesystem from SATA disk since r345948 Message-ID: <E1hU7Us-0007sD-Ry.qroxana-mail-ru@smtp41.i.mail.ru>
next in thread | raw e-mail | index | archive | help
Here's the boot message of r345948: ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 76319MB (156301488 512 byte sectors) GEOM: new disk ada0 mmc0: Card at relative address 0x1234 added: mmc0: card: SDHC SA08G 2.1 SN 44E37D57 MFG 11/2015 by 2 TM mmc0: quirks: 0 mmc0: bus: 4bit, 50MHz (high speed timing) mmc0: memory: 15196160 blocks, erase sector 8192 blocks mmc0: setting transfer rate to 50.000MHz (high speed timing) mmcsd0: 8GB <SDHC SA08G 2.1 SN 44E37D57 MFG 11/2015 by 2 TM> at mmc0 50.0MHz/4bit/32768-block Release APs CPU(1) applied BP hardening: not necessary arc4random: no preloaded entropy cache regulator: shutting down vcc3v0 Trying to mount root from ufs:/dev/label/root [rw]... regulator: shutting down vcc3v3 regulator: shutting down vcc5v0 regulator: shutting down ldo3 r345947 boots fine.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1hU7Us-0007sD-Ry.qroxana-mail-ru>