Date: Mon, 6 Jun 2005 15:36:49 -0600 From: Stephane Raimbault <stephane@enertiasoft.com> To: hardware@freebsd.org Subject: FBSD 5.4 - Dell PE 2850 - Interrupt storm detected Message-ID: <E4DB50F9-020B-4B25-B610-0F1D336DA131@enertiasoft.com>
next in thread | raw e-mail | index | archive | help
I have a Dell PowerEdge 2850 with a PERC4/dc RAID card. I noticed
I'm getting some Interrupt storms being detected and showing up in my
logs and the console. Is this something I should be concerned
about? Will this effect performance on the box. I don't utilize any
USB devices on this machine, although it's the USB interface that
seems to reporting the problem? Am I understanding something
incorrectly?
Here is my dmesg output including the errors:
%dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.4-RELEASE #0: Mon Jun 6 08:50:03 MDT 2005
root@dbm1.enertiasoft.com:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2792.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 3489398784 (3327 MB)
avail memory = 3414323200 (3256 MB)
ACPI APIC Table: <DELL PE BKC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic3: Changing APIC ID to 11
ioapic3: WARNING: intbase 96 != expected base 88
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem
0xdfde0000-0xdfdeffff,0xdfdf0000-0xdfdfffff irq 34 at device 5.0 on pci2
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem
0xdfdc0000-0xdfdcffff,0xdfdd0000-0xdfddffff irq 33 at device 5.1 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xdcc0-0xdcff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:11:43:e2:bc:84
em0: Speed:N/A Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xccc0-0xccff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:11:43:e2:bc:85
em1: Speed:N/A Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
amr0: <LSILogic MegaRAID 1.51> mem 0xd9000000-0xd93fffff irq 106 at
device 4.0 on pci9
amr0: <LSILogic PERC 4/DC> Firmware 350O, BIOS 1.09, 128MB RAM
pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff
irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf
irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf
irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,
0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xce000-0xcefff,
0xcc000-0xcc7ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
uhub3: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub3: 2 ports with 2 removable, self powered
Timecounters tick every 10.000 msec
acd0: CDROM <HL-DT-ST GCR-8240N/1.06> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34680MB (71024640 sectors) RAID 1 (optimal)
amrd1: <LSILogic MegaRAID logical drive> on amr0
amrd1: 139760MB (286228480 sectors) RAID 1 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
ses1 at amr0 bus 1 target 6 lun 0
ses1: <PE/PV 1x4 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses1: SAF-TE Compliant Device
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/amrd0s1a
em0: Link is up 100 Mbps Full Duplex
em0: Link is up 100 Mbps Full Duplex
Interrupt storm detected on "irq18: uhci2"; throttling interrupt source
Interrupt storm detected on "irq16: uhci0"; throttling interrupt source
%
Thanks,
Stephane
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E4DB50F9-020B-4B25-B610-0F1D336DA131>